No problem at all - looking at my last 'signature' i am prone to typo's, too. 😉 How ever: Found the table as well as the entries stateing "resource_state=Enabled" for all hosts.
Will then try this evening to change the values in 'op_host_capacity' to 'Enabled' (of course perfoming backup's and stuff beforehand) and report back how things where going. Regards Chris Am Do., 18. Nov. 2021 um 12:31 Uhr schrieb Wei ZHOU <ustcweiz...@gmail.com>: > Hi Christ, > > The table name is `host`, not `hosts`. Sorry for the typo > > -Wei > > On Thu, 18 Nov 2021 at 11:47, vas...@gmx.de <vas...@gmx.de> wrote: > >> Hi Wei, >> >> thanks again for your support. >> As I have not worked with the CS DB beforehand: >> Which table are you referring to with "hosts table"? Taking a look into my >> DB I am not finding a table of the name "hosts". >> >> Thanks in advance, >> Christ >> >> Am Do., 18. Nov. 2021 um 09:12 Uhr schrieb Wei ZHOU < >> ustcweiz...@gmail.com>: >> >> > Hi, >> > >> > If you are sure that all hosts are enabled (resource_state='Enabled' in >> > hosts table), you can update the capacity_state to "Enabled" by manual >> db >> > change. >> > >> > -Wei >> > >> > On Wed, 17 Nov 2021 at 20:32, vas...@gmx.de <vas...@gmx.de> wrote: >> > >> > > hi, >> > > >> > > all hosts are enabled and running fine. >> > > >> > > Am Mi., 17. Nov. 2021 um 19:59 Uhr schrieb Wei ZHOU < >> > ustcweiz...@gmail.com >> > > >: >> > > >> > > > Hi, >> > > > >> > > > Are the hosts Disabled or Enabled ? >> > > > >> > > > -Wei >> > > > >> > > > On Wed, 17 Nov 2021 at 16:54, vas...@gmx.de <vas...@gmx.de> wrote: >> > > > >> > > >> In the DB the records are there, entrys / values are correct BUT >> > > >> "capacity_state" is "Disabled". >> > > >> >> > > >> Which is a bit odd to understand, as i didn't made any further >> > changes. >> > > >> My process was to put them into maintenance-mode, perform the >> upgrade >> > to >> > > >> 4.16, restart the agent and then got them out of maintenance-mode >> > again. >> > > >> Did i made a mistake here? >> > > >> >> > > >> Any idea on how to get the values "Enabled" again? >> > > >> >> > > >> Am Mi., 17. Nov. 2021 um 15:40 Uhr schrieb Wei ZHOU < >> > > >> ustcweiz...@gmail.com>: >> > > >> >> > > >> > any record in DB ? >> > > >> > >> > > >> > select * from op_host_capacity where capacity_type =90; >> > > >> > >> > > >> > -Wei >> > > >> > >> > > >> > On Wed, 17 Nov 2021 at 14:14, vas...@gmx.de <vas...@gmx.de> >> wrote: >> > > >> > >> > > >> >> Sadly: Nothing at all. Not even a error. >> > > >> >> >> > > >> >> >> > > >> >> Am Mi., 17. Nov. 2021 um 13:10 Uhr schrieb Wei ZHOU < >> > > >> >> ustcweiz...@gmail.com>: >> > > >> >> >> > > >> >>> I do not have this issue. >> > > >> >>> >> > > >> >>> If you use cmk/cloudmonkey, can you share the result of the >> > > following >> > > >> >>> command ? >> > > >> >>> >> > > >> >>> cmk list capacity type=90 >> > > >> >>> >> > > >> >>> -Wei >> > > >> >>> >> > > >> >>> >> > > >> >>> On Wed, 17 Nov 2021 at 12:01, vas...@gmx.de <vas...@gmx.de> >> > wrote: >> > > >> >>> >> > > >> >>>> Hi everyone, >> > > >> >>>> >> > > >> >>>> so far the upgrade to 4.16 worked well and everything seems >> > working >> > > >> >>>> fine. >> > > >> >>>> What i noticed is, that for my root - admin the Dashboard >> doesn't >> > > >> show >> > > >> >>>> the >> > > >> >>>> CPU-Cores Graph anymore. >> > > >> >>>> Is there a way to display this again at the Dashboard? >> > > >> >>>> >> > > >> >>>> Regards, >> > > >> >>>> Chris >> > > >> >>>> >> > > >> >>> >> > > >> >> > > > >> > > >> > >> >
