Sorry for the late response. Got covid. Mild. Anyway.

I have plenty of Rocky 8 vm’s running with no issue and I can launch news Rocky 
8 vm with no issue. Here’s lspci from one of my running rocky 8.7 instances:

[root@cmx01 ~]# lspci
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] 
(rev 01)
00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
00:02.0 VGA compatible controller: Cirrus Logic GD 5446
00:03.0 Ethernet controller: Red Hat, Inc. Virtio network device
00:04.0 Communication controller: Red Hat, Inc. Virtio console
00:05.0 SCSI storage controller: Red Hat, Inc. Virtio block device
00:06.0 Unclassified device [00ff]: Red Hat, Inc. Virtio memory balloon
00:07.0 System peripheral: Intel Corporation 6300ESB Watchdog Timer

Thanks
-jeremy

> On Tuesday, Dec 06, 2022 at 5:10 PM, Nux <n...@li.nux.ro 
> (mailto:n...@li.nux.ro)> wrote:
> What hardware profile are you using? If you boot a system rescue cd or a 
> rocky 8 one, what is the output of "lspci"?
>
> On 6 December 2022 18:41:25 GMT, Jeremy Hansen <jer...@skidrow.la.INVALID> 
> wrote:
> > Unfortunately I’m getting a kernel panic upon boot. I tried both the 
> > production grub option and the rescue and I get the same result. Maybe 
> > something with the size of the root disk? I have it just at 8 gig right 
> > now? Something with the initrd perhaps?
> >
> > Thanks!
> > -jeremy
> >
> > > On Tuesday, Dec 06, 2022 at 12:53 PM, Jeremy Hansen <jer...@skidrow.la 
> > > (mailto:jer...@skidrow.la)> wrote:
> > > Wow. Thank you! I appreciate this. I’ll report back after trying.
> > >
> > > -jeremy
> > >
> > >
> > >
> > > > On Tuesday, Dec 06, 2022 at 11:39 AM, Nux <n...@li.nux.ro 
> > > > (mailto:n...@li.nux.ro)> wrote:
> > > >
> > > >
> > > > God knows, I've built you one with the Cloudstack bits enabled, you can
> > > > grab it from below. It's got the root login enabled, so that's your
> > > > default user. Let me know if it works.
> > > >
> > > > http://dl.openvm.eu/cloudstack/rockylinux/9/rockylinux-9-kvm-rootuser.qcow2.bz2
> > > >
> > > > I'll build more later on with non-priviliged users.
> > > >
> > > > ---
> > > > Nux
> > > > www.nux.ro [1]
> > > >
> > > > On 2022-12-06 15:26, Jeremy Hansen wrote:
> > > >
> > > > > Unfortunately I think it gets stuck before ever reaching grub. I tried
> > > > > to catch it on the console after a reboot and this is all I see. I
> > > > > never get to the grub menu.
> > > > >
> > > > > Is there a way I can alter the qcow2 image before I create a template?
> > > > >
> > > > > I thought perhaps I could see the IP it obtains via dhcp, but I see
> > > > > nothing coming from that VM which tells me it's not getting to the
> > > > > point of bringing up its interface.
> > > > >
> > > > > Thanks
> > > > > -jeremy
> > > > >
> > > > > On Tuesday, Dec 06, 2022 at 4:59 AM, Nux <n...@li.nux.ro> wrote:
> > > > >
> > > > > You can't alter the kernel parameters from libvirt as the image loads
> > > > > its own kernel, but you can alter the parameters at their grub screen.
> > > > > Try to open the console proxy as soon as possible and hit up or down
> > > > > arrow so grub doesn't proceed, then hit "e" key (I think) to edit the
> > > > > appropriate vmlinuz entry.
> > > > >
> > > > > My hunch is that this being a generic image (made mostly with EC2 and
> > > > > possibly Openstack in mind) they send all output to a serial console
> > > > > instead of vga, so you would need to remove any parameters such as
> > > > > console=ttyS0 and then boot it.
> > > > >
> > > > > ---
> > > > > Nux
> > > > > www.nux.ro [1]
> > > > >
> > > > > On 2022-12-06 04:26, Jeremy Hansen wrote:
> > > > >
> > > > > I'm trying to boot a Rocky cloud image for Rocky 9.1 using their qcow2
> > > > > image.
> > > > >
> > > > > As soon as I start the VM, I get:
> > > > >
> > > > > "Probing EDD (edd=off to disable)... ok"
> > > > >
> > > > > and then nothing. I don't see a DHCP lease being pulled, so I assume
> > > > > the VM isn't actually proceeding with boot.
> > > > >
> > > > > Anyone else see this? This is on Cloudstack 4.17.1.0. I posted a
> > > > > similar message on the Rocky mail list. Is there an easy way via virsh
> > > > > or cloudstack to alter the kernel command line parameters in an
> > > > > existing image before it boots?
> > > > >
> > > > > Thanks
> > > > > -jeremy
> > > > >
> > > > > Links:
> > > > > ------
> > > > > [1] http://www.nux.ro
> > > >
> > > >
> > > > Links:
> > > > ------
> > > > [1] http://www.nux.ro

Attachment: signature.asc
Description: PGP signature

Reply via email to