Two bridges (cloudbr0/cloudbr1) with same interface (eno1) ? 在 2024年2月1日星期四，Javi Moncayo <[email protected]> 写道：
> Hi guys, > > I am using Ubuntu 20 I have two interfaces. One physical (eno1) with > internet access, and eno2 is a vRack for the private network. > > On the configuration below, if I use eno2 as interface for both bridges, I > can create VMs and they can ping each other but I do not have internet > access. However, if I set the interface to eno1, the network crashes... > > What am I missing? How should my configuration look like? > > Thanks in advance! > > network: > version: 2 > ethernets: > eno2: > dhcp4: no > addresses: > - 192.168.0.1/16 > eno1: > accept-ra: false > addresses: > - xxxx:xxxx:xxx:xxxx::/56 > dhcp4: true > match: > macaddress: ac:1f:6b:df:50:78 > nameservers: > addresses: > - xxxx:xxxx:x:xxx::1 > bridges: > cloudbr0: > addresses: [192.168.1.1/16] > gateway4: 192.168.255.255 > nameservers: > addresses: [8.8.8.8] > interfaces: [eno1] > dhcp4: false > dhcp6: false > parameters: > stp: false > forward-delay: 0 > cloudbr1: > interfaces: [eno1] > dhcp4: false > dhcp6: false > parameters: > stp: false > forward-delay: 0 > > eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet xx.xxx.xx.xxx netmask 255.255.255.0 broadcast xx.xxx.xx.xxx > inet6 xxxx::xxxx:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x20<link> > inet6 xxxx:xxxx:xxx:xxxx:: prefixlen 56 scopeid 0x0<global> > ether xx:xx:xx:xx:xx:xx txqueuelen 1000 (Ethernet) > RX packets 441753 bytes 142093871 (142.0 MB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 425365 bytes 66792387 (66.7 MB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > eno2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 192.168.0.1 netmask 255.255.0.0 broadcast 192.168.255.255 > ether ac:1f:6b:df:50:79 txqueuelen 1000 (Ethernet) > RX packets 29006 bytes 2390888 (2.3 MB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 24554 bytes 1715980 (1.7 MB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >
