ok is there any way to tell vms just to get a dhcp ip off the local lan without the router in the mix??
everything in the lab lan is 192.168.10.xxx On Wednesday 17 April 2024 01:40:30 PM (+07:00), Wei ZHOU wrote: > Hi, > > cloud0 is the control network of virtual routers and system vms. > The IP of cloud0 is configured as 169.254.0.1/16 by default. > > > -Wei > > > > On Wed, Apr 17, 2024 at 7:41 AM Embedded <li...@optimcloud.com.invalid> wrote: > > > > cloudstack seems to be confusing networking on a lab install ... vms come > > up but > > the ip they have appears to be on the other side instead of the router > > side, i noticed > > cloud0 is using a 169.xxx IP address, where this is a flat 192.168.10.xxx > > network > > > > root@cs:~# brctl show > > bridge name bridge id STP enabled interfaces > > cloud0 8000.7623b36199a8 no vnet0 > > vnet3 > > vnet7 > > cloudbr0 8000.266873c8a6be no eno1 > > vnet1 > > vnet2 > > vnet4 > > vnet5 > > vnet6 > > vnet7 > > > > > > > > 5: cloudbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state > > UP group default qlen 1000 > > link/ether 26:68:73:c8:a6:be brd ff:ff:ff:ff:ff:ff > > inet 192.168.10.10/24 brd 192.168.10.255 scope global cloudbr0 > > valid_lft forever preferred_lft forever > > inet6 fe80::2468:73ff:fec8:a6be/64 scope link > > valid_lft forever preferred_lft forever > > 7: cloud0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state > > UP group default qlen 1000 > > link/ether 76:23:b3:61:99:a8 brd ff:ff:ff:ff:ff:ff > > inet 169.254.0.1/16 scope global cloud0 > > valid_lft forever preferred_lft forever > > inet6 fe80::7423:b3ff:fe61:99a8/64 scope link > > valid_lft forever preferred_lft forever > > -- > > Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com > -- Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com
