The connection I'm trying to establish is between two networks that are
not on the same interface. Each host has two network interfaces—one for
general traffic and the other exclusively for internal traffic with the
*Storage servers*.
I don’t want to expose my network connection to the main network.
Instead, I want to use a *Virtual Router (VR)* that is connected to both
networks. I understand that for Internet access, a connection to the
main network would also be required.
My physical networks are:
* *Physical Network 1 (CLOUDBR0):* Main network
* *Physical Network 2 (CLOUDBR1):* Storage servers network with the
*STO* tag
I'm using the following network offerings:
* *DefaultSharedNetworkOffering* with the *STO* tag
* *DefaultNetworkOfferingforKubernetesService* (no tag)
Graph of the expected network:
https://drive.google.com/file/d/1q-p33zsBS8dGrWFl4SH5Vk3trAc3rTdh/view
Thanks for your reply.
---
El 4/2/25 a las 21:57, Jayanth Reddy escribió:
Hello Mercado,
The VR under the default NAT configuration will have a Source NAT IP to which
your isolated network will get translated to, and external networks will see
that IP when any resources in the isolated network attempt to reach. This is
the same case with Static NAT. You may solve this like:
1. Establishing connectivity between your Public Network (the one that's on the
VR for NAT) and the storage network. If you're using VLANs, this should be
termed as inter-VLAN communication. Ensure devices in your storage network have
a default route (or static) in the same network to respond to the traffic.
Let me know if that works for you.
Thanks
---- On Wed, 05 Feb 2025 02:53:05 +0530cmerc...@g2khosting.com wrote ----
Hi everyone,
I'm setting up a CloudStack 4.19.1 environment and ran into an issue I
can't seem to solve.
* I have an *Isolated* network called *Vms*
* I have a *Shared* network called *Storage*
* I need the *Vms* network to be able to access the *Storage* network
through the Virtual Router.
I haven't found a way to make the Virtual Router act as a bridge between
*Vms *and *Storage*.
I tried adding both network interfaces to a VM, and in that case, the VM
could see both networks just fine.
Has anyone set up something similar or have any suggestions on how to
get the Virtual Router to allow this communication?
