I decided to reinstall everything clean again, drop the tables completely and
start all over again.
The management IPs I see them routed. even the ones for the s-VM and v-VM. I
see them on the transport switches.
The Public VXLAN is created, the Public IP address I am not able to see them
anywhere !
FROM THE UI: If I run a diagnostic Ping to the public IP for the
secondarystoragevm or for the consoleproxy - success !!!
Why or how is not being routed ? How can I troubleshoot this?
vxlan1000: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9050 qdisc noqueue master
brvx-1000 state UNKNOWN group default qlen 1000
link/ether 1a:00:21:de:dc:bc brd ff:ff:ff:ff:ff:ff
brvx-1000: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9100 qdisc noqueue state UP
group default qlen 1000
link/ether 1a:00:21:de:dc:bc brd ff:ff:ff:ff:ff:ff
Any tip will be appreciated.
Thank you Teams.
Tata Y.
> On Apr 3, 2025, at 12:47 PM, Chi vediamo <tatay...@gmail.com> wrote:
>
>
> Using [Network 1] Only for all three [Management], [guest],[public] Tagged as
> VXLAN and with cloudbr1
>
> - **Should I use a separate Network for each ? ? **
>
> What should I check, in addition to the official manual: I reread again the
> instructions and saw videos
> https://www.youtube.com/watch?v=9gXEmWbgX2o <<Actually this video shown both
> VMs are down'
> https://www.youtube.com/watch?v=DlJg3LYvIIs << this shows both on green.
> https://www.youtube.com/watch?v=vZfHfoYEMdY << this one shows the [Agent
> State] green while the Vms are in starting mode with a bue dot.
> I have Read the https://rohityadav.cloud/blog/cloudstack-kvm/
>
> - Management servers are two physical separated servers. all Ubuntu 22.04
> - DB is mysql running on a separate server. Mysql 8
> - Hypervisor is running on a separate server. Ubuntu22.0 KVM
> - Cloudstack 4.20.0.0
> - Primary Storage CEPH RDB
> - Secondary storage EMC NFS
>
>
> **Issue 1) I can't add a second Management server, No idea why !!**
> Thank you Wei, as soon i shut the second Management server the
> initial VMs proxy and secondary storage come up
>
> **Issue 2) Management Network is Tagged as VXLAN, the UI shows
> vlan://untagged - "no typo vlan" every-time i use the UI to change to
> vxlan://untagged**
> I did try vxlan://untagged parameter Got the message: Vlan parameter :
> vxlan://untagged is not in valid format
> I did try vxlan:// Got the message:
> Unable to convert to broadcast URI: vxlan://
> I did try vxlan:// Got the message:
> Vlan parameter : vxlan://100 is not in valid format'
>
> **Issue 3) s-VM and Proxy come up but Public IP addresses are not being
> routed Advertised.**
> v-154-VM <public-IP-3> <Private-IP> <control-ip-169.x.x.x>
> [State-Running] [Agent State-Gray]
> s-285-VM <public-IP-2> <Private-IP> <control-ip-169.x.x.y>
> [State-Running] [Agent State-Gray]
> If both [State] and [Agent State] need to be green, What other debug
> can I enable ??
>
> **NOTE** The VXLAN parameter for the Public network was taken vxlan://1000,
> But are not routed.
>
> I have to use a Single management server as everything messes UP when I run a
> second Management server with the Same Database.
>
> I reiterate The initial VMs are running:
> v-154-VM <public-IP-3> <Private-IP> <control-ip-169.x.x.x>
> s-285-VM <public-IP-2> <Private-IP> <control-ip-169.x.x.y>
>
>
>
> I do not see the Public IP anywhere, not even advertised on vni1000 or any
> other, the public VNI is there was created by the system, but nothing is
> there - No IP addresses advertised
>
> I used VLAN/VNI vxlan://1000
>
> vxlan1000: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9050 master brvx-1000 state
> forwarding priority
> There are 2 VNETS assigned
>
> virsh domiflist s-285-VM
> Interface Type Source Model MAC
> --------------------------------------------------------------
> vnet3 bridge cloud0 virtio 0e:00:a9:fe:a1:14
> vnet4 bridge cloudbr1 virtio 1e:00:3f:00:03:33
> vnet5 bridge brvx-1000 virtio 1e:00:b8:00:0c:fe
>
> virsh domifaddr s-285-VM
> Name MAC address Protocol Address
> -------------------------------------------------------------------------------
> ----- Nothing here -----
>
>
> the command arp -n, does not show Public IP addresses neither the management
> IP addresses, just the private IP addresses and the <control-ip-169.x.x.x>
>
> sh bgp evpn route vni 1000
> BGP table version is 1, local router ID is 10.1.1.14
> Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
> Origin codes: i - IGP, e - EGP, ? - incomplete
> EVPN type-1 prefix: [1]:[EthTag]:[ESI]:[IPlen]:[VTEP-IP]:[Frag-id]
> EVPN type-2 prefix: [2]:[EthTag]:[MAClen]:[MAC]:[IPlen]:[IP]
> EVPN type-3 prefix: [3]:[EthTag]:[IPlen]:[OrigIP]
> EVPN type-4 prefix: [4]:[ESI]:[IPlen]:[OrigIP]
> EVPN type-5 prefix: [5]:[EthTag]:[IPlen]:[IP]
>
> Network Next Hop Metric LocPrf Weight Path
> *> [3]:[0]:[32]:[10.1.1.14]
> 10.1.1.14(hv1)
> 32768 i
> ET:8 RT:5641:1000
>
> Displayed 1 prefixes (1 paths)
>
> At the Agent side only WARNINGS I am not using uefi.
>
> 2025-04-03 00:01:44,744 ERROR [kvm.resource.LibvirtComputingResource]
> (main:[]) (logid:) uefi properties file not found due to: Unable to find file
> uefi.properties.
> 2025-04-03 00:01:46,815 WARN [utils.script.Script] (Agent-Handler-1:[])
> (logid:) Process [15539] for command [/bin/bash -c virt-v2v --version ]
> encountered the error: [127].
> 2025-04-03 00:01:47,921 ERROR [cloud.agent.Agent] (agentRequest-Handler-5:[])
> (logid:09929bd6) Unexpected arch null, expected x86_64
> 2025-04-03 00:01:46,815 WARN [utils.script.Script] (Agent-Handler-1:[])
> (logid:) Execution of process [15539] for command [/bin/bash -c virt-v2v
> --version ] failed.
> 2025-04-03 00:01:46,815 WARN [utils.script.Script] (Agent-Handler-1:[])
> (logid:) Process [15539] for command [/bin/bash -c virt-v2v --version ]
> encountered the error: [127].
>
>
> AT the management the rror is:
> 2025-04-03 00:00:28,115 DEBUG [c.c.c.ClusterServiceServletImpl]
> (Cluster-Worker-5:[ctx-c96bca9e]) (logid:3fbff637) Executing
> ClusterServicePdu with service URL: https://10.1.1.1:9090/clusterservice
> 2025-04-03 00:21:28,122 ERROR [c.c.c.ClusterServiceServletImpl]
> (Cluster-Worker-5:[ctx-c96bca9e]) (logid:3fbff637) Exception from :
> https://10.1.1.1:9090/clusterservice, method : null, exception :
> [javax.net](http://javax.net/).ssl.SSLPeerUnverifiedException: Certificate
> for <10.1.1.1> doesn't match any of the subject alternative names:
> [fde0:f:2897:1:1:0:0:1, 172.1.1.1, fe80:0:0:0:e643:4bff:fe81:9660,
> cs1.myinternaldomain.int, cloudstack.internal]
>
>
> Tata Y.
