GitHub user tatay188 closed a discussion: BUGS: CloudStack 4.20 VXLAN-EVPN - Management VXLAN generates error - Public VXLAN routes not advertised - is Bug LINKED TO #9920? - Initial VMs running but Grey State for Agent State
### problem Using [Network 1] Only for all three [Management], [guest],[public] Tagged as VXLAN and with cloudbr1 - **Should I use a separate Network for each ? ? ** What should I check, in addition to the official manual: I reread again the instructions and saw videos https://www.youtube.com/watch?v=9gXEmWbgX2o <<Actually this video shown both VMs are down' https://www.youtube.com/watch?v=DlJg3LYvIIs << this shows both on green. https://www.youtube.com/watch?v=vZfHfoYEMdY << this one shows the [Agent State] green while the Vms are in starting mode with a bue dot. I have Read the https://rohityadav.cloud/blog/cloudstack-kvm/ - Management servers are two physical separated servers. all Ubuntu 22.04 - DB is mysql running on a separate server. Mysql 8 - Hypervisor is running on a separate server. Ubuntu22.0 KVM - Cloudstack 4.20.0.0 **Issue 1) I can't add a second Management server, No idea why !!** Thank you Wei, as soon i shut the second Management server the initial VMs proxy and secondary storage come up even when I enable and configure the "MultipleServer" = true and have the servers there. **Issue 2) Management Network is Tagged as VXLAN, the UI shows vlan://untagged - "no typo vlan" every-time i use the UI to change to vxlan://untagged** I did try vxlan://untagged parameter Got the message: Vlan parameter : vxlan://untagged is not in valid format I did try vxlan:// Got the message: Unable to convert to broadcast URI: vxlan:// I did try vxlan:// Got the message: Vlan parameter : vxlan://1000 is not in valid format'  **Issue 3) s-VM and Proxy come up but Public IP addresses are not being routed Advertised.** s-1-VM <public-IP-2> <Private-IP> <control-ip-169.x.x.x> [State-Running] [Agent State-Gray] v-2-VM <public-IP-3> <Private-IP> <control-ip-169.x.x.y> [State-Running] [Agent State-Gray] If both [State] and [Agent State] need to be green, What other debug can I enable ?? Is grey radio button a normal state as shown in the picture ? <img width="938" alt="Image" src="https://github.com/user-attachments/assets/e276cdba-783c-4981-bf97-a99b7e115b72"; /> **NOTE** The VXLAN parameter for the Public network was taken vxlan://1000, But IP addresses are not routed. **Issue 4) The VNI's I Choose for Guest are showing as VLANs,** I try to use the format of vxlan://1024 for vxlan the start and vxlan://2048 for the end and got the same error messages, not valid format **Issue 5) VXLAN 1000 No route to the public IP addresses** The Public IPs are assigned, but there is no network assigned to it: - Is there maybe a secret button on the global configuration ? <img width="967" alt="Image" src="https://github.com/user-attachments/assets/abda5a28-aa8e-42f1-8fba-80829e9f001e"; /> I have to use a Single management server as everything messes UP when I run a second Management server with the Same Database. I reiterate The initial VMs are running: s-1-VM <public-IP-3> <Private-IP> <control-ip-169.x.x.x> v-2-VM <public-IP-2> <Private-IP> <control-ip-169.x.x.y> I do not see the Public IP anywhere, not even advertised on vni1000 or any other, the public VNI is there was created by the system, but nothing is there - No IP addresses advertised I used VLAN/VNI vxlan://1000 vxlan1000: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9050 master brvx-1000 state forwarding priority There are 2 VNETS assigned virsh domiflist s-1-VM Interface Type Source Model MAC -------------------------------------------------------------- vnet3 bridge cloud0 virtio 0e:00:a9:fe:a1:14 vnet4 bridge cloudbr1 virtio 1e:00:3f:00:03:33 vnet5 bridge brvx-1000 virtio 1e:00:b8:00:0c:fe virsh domifaddr s-1-VM Name MAC address Protocol Address ------------------------------------------------------------------------------- ----- Nothing here ----- the command arp -n, does not show Public IP addresses neither the management IP addresses, just the private IP addresses and the <control-ip-169.x.x.x> sh bgp evpn route vni 1000 BGP table version is 1, local router ID is 10.1.1.14 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete EVPN type-1 prefix: [1]:[EthTag]:[ESI]:[IPlen]:[VTEP-IP]:[Frag-id] EVPN type-2 prefix: [2]:[EthTag]:[MAClen]:[MAC]:[IPlen]:[IP] EVPN type-3 prefix: [3]:[EthTag]:[IPlen]:[OrigIP] EVPN type-4 prefix: [4]:[ESI]:[IPlen]:[OrigIP] EVPN type-5 prefix: [5]:[EthTag]:[IPlen]:[IP] Network Next Hop Metric LocPrf Weight Path *> [3]:[0]:[32]:[10.1.1.14] 10.1.1.14(hv1) 32768 i ET:8 RT:5641:1000 Displayed 1 prefixes (1 paths) At the Agent side only WARNINGS I am not using uefi. 2025-04-03 00:01:44,744 ERROR [kvm.resource.LibvirtComputingResource] (main:[]) (logid:) uefi properties file not found due to: Unable to find file uefi.properties. 2025-04-03 00:01:46,815 WARN [utils.script.Script] (Agent-Handler-1:[]) (logid:) Process [15539] for command [/bin/bash -c virt-v2v --version ] encountered the error: [127]. 2025-04-03 00:01:47,921 ERROR [cloud.agent.Agent] (agentRequest-Handler-5:[]) (logid:09929bd6) Unexpected arch null, expected x86_64 2025-04-03 00:01:46,815 WARN [utils.script.Script] (Agent-Handler-1:[]) (logid:) Execution of process [15539] for command [/bin/bash -c virt-v2v --version ] failed. 2025-04-03 00:01:46,815 WARN [utils.script.Script] (Agent-Handler-1:[]) (logid:) Process [15539] for command [/bin/bash -c virt-v2v --version ] encountered the error: [127]. AT the management the rror is: 2025-04-03 00:00:28,115 DEBUG [c.c.c.ClusterServiceServletImpl] (Cluster-Worker-5:[ctx-c96bca9e]) (logid:3fbff637) Executing ClusterServicePdu with service URL: https://10.1.1.1:9090/clusterservice 2025-04-03 00:21:28,122 ERROR [c.c.c.ClusterServiceServletImpl] (Cluster-Worker-5:[ctx-c96bca9e]) (logid:3fbff637) Exception from : https://10.1.1.1:9090/clusterservice, method : null, exception : [javax.net](http://javax.net/).ssl.SSLPeerUnverifiedException: Certificate for <10.1.1.1> doesn't match any of the subject alternative names: [fde0:f:2897:1:1:0:0:1, 172.1.1.1, fe80:0:0:0:e643:4bff:fe81:9660, cs1.myinternaldomain.int, cloudstack.internal] ### versions - Management servers are two physical separated servers. all Ubuntu 22.04 - DB is mysql running on a separate server. Mysql 8 - Hypervisor is running on a separate server. Ubuntu22.0 KVM - Cloudstack 4.20.0.0 - Primary Storage CEPH 19.2.1.1 RBD - Secondary Storage EMC NFS ### The steps to reproduce the bug 1. As described above 2. 3. ... ### What to do about it? _No response_ GitHub link: https://github.com/apache/cloudstack/discussions/10694 ---- This is an automatically sent email for users@cloudstack.apache.org. To unsubscribe, please send an email to: users-unsubscr...@cloudstack.apache.org
