GitHub user nickaccuweb added a comment to the discussion: Cloudstack 4.22 - Configuration Wizard failing - Fix Error
@soulfulgent Thanks for confirming. That clears up a few things. Since the Storage IP range has already been created and POD-1 is enabled, we don't need to recreate either of them. I also understand now that your intention was to configure everything without VLAN tagging, and VLAN 800 was only added because the wizard wouldn't proceed without it. Regarding the Zone remaining disabled while the POD is enabled, this can be normal during the initial configuration. CloudStack doesn't automatically enable the Zone just because the POD is enabled. Before enabling the Zone manually, I would suggest checking that the cluster, host, primary storage, and secondary storage have been configured correctly. For the Guest network, I suspect the issue may be related to the Advanced Zone networking configuration or the selected shared-network offering rather than the Storage network itself. Could you please confirm two things? 1. Under Physical Network 2, is the isolation method configured as VLAN? 2. Are you planning to use a single untagged network for all traffic, or separate physical interfaces for Management, Storage, and Guest traffic without VLAN tagging? If your intention is to run everything untagged, we should first confirm whether the current Advanced Zone and network offering support that configuration rather than continuing to enter VLAN 800 just to get past the wizard. I wouldn't recommend rebuilding the database or switching CloudStack versions yet. Let's confirm the intended physical network layout first and then decide whether the existing Zone can be completed manually. Regards, Nick R AccuWeb.Cloud GitHub link: https://github.com/apache/cloudstack/discussions/13956#discussioncomment-19363202 ---- This is an automatically sent email for [email protected]. To unsubscribe, please send an email to: [email protected]
