On 08/26/2016 08:11 AM, Gabriele Bulfon wrote: > I tried adding some debug in ocf-shellfuncs, showing env and ps -ef into > the corosync.log > I suspect it's always using ksh, because in the env output I produced I > find this: KSH_VERSION=.sh.version > This is normally not present in the environment, unless ksh is running > the shell.
The RAs typically start with #!/bin/sh, so whatever that points to on your system is what will be used. > I also tried modifiying all ocf shells with "#!/usr/bin/bash" at the > beginning, no way, same output. You'd have to change the RA that includes them. > Any idea how can I change the used shell to support "local" variables? You can either edit the #!/bin/sh line at the top of each RA, or figure out how to point /bin/sh to a Bourne-compatible shell. ksh isn't Bourne-compatible, so I'd expect lots of #!/bin/sh scripts to fail with it as the default shell. > Gabriele > > ---------------------------------------------------------------------------------------- > *Sonicle S.r.l. *: http://www.sonicle.com <http://www.sonicle.com/> > *Music: *http://www.gabrielebulfon.com <http://www.gabrielebulfon.com/> > *Quantum Mechanics : *http://www.cdbaby.com/cd/gabrielebulfon > > ------------------------------------------------------------------------ > > > *Da:* Gabriele Bulfon <gbul...@sonicle.com> > *A:* kgail...@redhat.com Cluster Labs - All topics related to > open-source clustering welcomed <users@clusterlabs.org> > *Data:* 26 agosto 2016 10.12.13 CEST > *Oggetto:* Re: [ClusterLabs] ocf::heartbeat:IPaddr > > > I looked around what you suggested, inside ocf-binaris and > ocf-shellfuncs etc. > So I found also these logs in corosync.log : > > Aug 25 17:50:33 [2250] crmd: notice: process_lrm_event: > xstorage1-xstorage2_wan2_IP_start_0:22 [ > /usr/lib/ocf/resource.d/heartbeat/IPaddr[71]: local: not found [No > such file or > directory]\n/usr/lib/ocf/resource.d/heartbeat/IPaddr[354]: local: > not found [No such file or > directory]\n/usr/lib/ocf/resource.d/heartbeat/IPaddr[355]: local: > not found [No such file or > directory]\n/usr/lib/ocf/resource.d/heartbeat/IPaddr[356]: local: > not found [No such file or directory]\nocf-exit-reason:Setup > problem: coul > > Aug 25 17:50:33 [2246] lrmd: notice: operation_finished: > xstorage2_wan2_IP_start_0:3613:stderr [ > /usr/lib/ocf/resource.d/heartbeat/IPaddr[71]: local: not found [No > such file or directory] ] > > Looks like the shell is not happy with the "local" variable definition. > I tried running ocf-shellfuncs manually with sh and bash and they > all run without errors. > How can I see what shell is running these scripts? > > > ---------------------------------------------------------------------------------------- > *Sonicle S.r.l. *: http://www.sonicle.com <http://www.sonicle.com/> > *Music: *http://www.gabrielebulfon.com <http://www.gabrielebulfon.com/> > *Quantum Mechanics : *http://www.cdbaby.com/cd/gabrielebulfon > > > > > ---------------------------------------------------------------------------------- > > Da: Ken Gaillot <kgail...@redhat.com> > A: users@clusterlabs.org > Data: 25 agosto 2016 18.07.42 CEST > Oggetto: Re: [ClusterLabs] ocf::heartbeat:IPaddr > > On 08/25/2016 10:51 AM, Gabriele Bulfon wrote: > > Hi, > > > > I'm advancing with this monster cluster on XStreamOS/illumos ;) > > > > In the previous older tests I used heartbeat, and I had these > lines to > > take care of the swapping public IP addresses: > > > > primitive xstorage1_wan1_IP ocf:heartbeat:IPaddr params > ip="1.2.3.4" > > cidr_netmask="255.255.255.0" nic="e1000g1" > > primitive xstorage2_wan2_IP ocf:heartbeat:IPaddr params > ip="1.2.3.5" > > cidr_netmask="255.255.255.0" nic="e1000g1" > > > > location xstorage1_wan1_IP_pref xstorage1_wan1_IP 100: xstorage1 > > location xstorage2_wan2_IP_pref xstorage2_wan2_IP 100: xstorage2 > > > > They get configured, but then I get this in crm status: > > > > xstorage1_wan1_IP (ocf::heartbeat:IPaddr): Stopped > > xstorage2_wan2_IP (ocf::heartbeat:IPaddr): Stopped > > > > Failed Actions: > > * xstorage1_wan1_IP_start_0 on xstorage1 'not installed' (5): > call=20, > > status=complete, exitreason='Setup problem: couldn't find command: > > /usr/bin/gawk', > > last-rc-change='Thu Aug 25 17:50:32 2016', queued=1ms, exec=158ms > > * xstorage2_wan2_IP_start_0 on xstorage1 'not installed' (5): > call=22, > > status=complete, exitreason='Setup problem: couldn't find command: > > /usr/bin/gawk', > > last-rc-change='Thu Aug 25 17:50:33 2016', queued=1ms, exec=29ms > > * xstorage1_wan1_IP_start_0 on xstorage2 'not installed' (5): > call=22, > > status=complete, exitreason='Setup problem: couldn't find command: > > /usr/bin/gawk', > > last-rc-change='Thu Aug 25 17:50:30 2016', queued=1ms, exec=36ms > > * xstorage2_wan2_IP_start_0 on xstorage2 'not installed' (5): > call=20, > > status=complete, exitreason='Setup problem: couldn't find command: > > /usr/bin/gawk', > > last-rc-change='Thu Aug 25 17:50:29 2016', queued=0ms, exec=150ms > > > > > > The crm configure process already checked of the presence of the > > required IPaddr shell, and it was ok. > > Now looks like it's looking for "/usr/bin/gawk", and that is > actually there! > > Is there any known incompatibility with the mixed heartbeat > ocf ? Should > > I use corosync specific ocf files or something else? > > "heartbeat" in this case is just an OCF provider name, and has > nothing > to do with the heartbeat messaging layer, other than having its > origin > in the same project. There actually has been a recent proposal > to rename > the provider to "clusterlabs" to better reflect the current reality. > > The "couldn't find command" message comes from the ocf-binaries > shell > functions. If you look at have_binary() there, it uses sed and > which, > and I'm guessing that fails on your OS somehow. You may need to > patch it. > > > Thanks again! > > > > Gabriele > > > > > > ---------------------------------------------------------------------------------------- > > *Sonicle S.r.l. *: http://www.sonicle.com > <http://www.sonicle.com/> > > *Music: *http://www.gabrielebulfon.com > <http://www.gabrielebulfon.com/> > > *Quantum Mechanics : *http://www.cdbaby.com/cd/gabrielebulfon _______________________________________________ Users mailing list: Users@clusterlabs.org http://clusterlabs.org/mailman/listinfo/users Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://bugs.clusterlabs.org