Hi all:

First of all, I'm a begineer in this field but I got to manage Pacemaker on a 
Ubuntu 10.04 cluster fw. That's is, 2 fw in a Active/Passive environment.

Last Thursday I changed the netmask of an interface (from /28 to /27) on both 
appliances (but I didn't change the netmask in the crm configure section). 
Since then, the cluster was down for 20 minutes (no internet, no mail, 
everything down). Don't know how but after that 20 minutes, the node is always 
passive (Node2) got the Active rol and so far it keeps it.

Right now, in Node1 I can see the next (through the crm_mon -fo1 command):

IP_Cluster_vlan493: migration-threshold=1000000 fail-count=1000000
    + (849) start: rc=1 (unknown error)
    + (850) stop: rc=0 (ok)

Node 2 has got the same configuration in /etc/network/interfaces and crm than 
Node1 but there is no problem with that interface:

IP_Cluster_vlan493: migration-threshold=1000000
    + (415) stop: rc=0 (ok)
    + (437) start: rc=0 (ok)
    + (438) monitor: interval=10000ms rc=0 (ok)


The crm_verify -VL you can see:

Node1# crm_verify -VL
crm_verify[13965]: 2017/02/20_09:29:32 WARN: unpack_rsc_op: Processing failed 
op IP_Cluster_vlan493_start_0 on TAfwx01: unknown error (1)
crm_verify[13965]: 2017/02/20_09:29:32 WARN: common_apply_stickiness: Forcing 
IP_Cluster_vlan493 away from TAfwx01 after 1000000 failures (max=1000000)
Node1#


The output of that command in Node2 is:

Node2# crm_verify -VL
crm_verify[20373]: 2017/02/20_09:56:32 WARN: unpack_rsc_op: Processing failed 
op IP_Cluster_vlan493_start_0 on Node1: unknown error (1)
crm_verify[20373]: 2017/02/20_09:56:33 WARN: common_apply_stickiness: Forcing 
IP_Cluster_vlan493 away from Node1 after 1000000 failures (max=1000000)
Node2#

If both of them's got the same configuration, how is it possible vlan493 is 
working fine in Node2 but fails in Node1??

Thanks a lot for your help
Regards
_______________________________________________
Users mailing list: [email protected]
http://lists.clusterlabs.org/mailman/listinfo/users

Project Home: http://www.clusterlabs.org
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: http://bugs.clusterlabs.org

Reply via email to