Hello (again) Having scrapped my dodgy D-Link ath(4) based card, I am now trying an MSI CardBus CB54G2 card.
It attaches but 'dmesg | grep ral' says: Preloaded elf module "/modules/if_ral.ko" at 0xc050245c. ral0: <Ralink Technology RT2560> mem 0x88002000-0x88003fff irq 11 at device 0.0 on cardbus0 ral0: MAC/BBP RT2560 (rev 0xffffffff), RF unknown ral0: MAC address: ff:ff:ff:ff:ff:ff ral0: could not read from BBP <snip> ral0: could not read from BBP ral0: timeout waiting for BBP I saw a post in the archives with a similar problem but a cbb patch fixed it. I am running 1.9.0-PREVIEW and have applied the latest cbb patch (cbb_020407.diff) but it makes no difference. If it's any help, 'vmstat -i' (after patching) gives: interrupt total rate clk 24149 225 atkbd0 211 1 ohci0 0 0 pcm0/fxp0/cbb0 1 0 psm0 2715 25 ata0 2447 22 ata1 33 0 irq19 49 0 swi_crypto/swi_camnet 0 0 swi_cambio 0 0 swi_vm 0 0 swi_taskq 0 0 Total 29605 276 FWIW, NetBSD 4.99.xx - on the same disk - gives the card a valid MAC address. TIA for any help. -jr DragonFly think.makhraj.net 1.9.0-PREVIEW DragonFly 1.9.0-PREVIEW #0: Sun Feb 11 08:08:03 AST 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MYKERNEL i386