Hi, I tried to mount my pendrive today on 1.10.1 (installed from ISO) with no luck. When I try to mount it with:
mount_msdos /dev/da0s1 /mnt I get "mount_msdos: /dev/da0s1: Invalid argument". I tried then to list the disklabel with: disklabel da0s1 and got: disklabel: ioctl DIOCGDINFO32: label magic number or checksum is wrong! (disklabel or kernel is out of date?) dmesg shows the following: da0 at umass-sim0 bus 0 target 0 lun 0 da0: <USB2.0 (FS) FLASH DISK 1.00> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 497MB (1019617 512 byte sectors: 64H 32S/T 497C) da0s1: slice starts beyond end of the disk: rejecting it da0s2: slice starts beyond end of the disk: rejecting it da0s4: slice extends beyond end of disk: truncating from 3435113472 to 1019617 sectors umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED umass0: at uhub2 port 1 (addr 2) disconnected (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry pass(31)[ffffffff/00000002]: Warning: dev_ops_remove() called while 4 device refs still exist! umass0: detached I tried also with 1.8.2 with the same results. What am I doing wrong? Thanks in advance Regards.- marianitn
