Hi, I have a notebook PC with existing FreeBSD disk partitions of 6.2 and 5.5 releases and then to install DragonFly 2.0 for multiple OS booting. Before I begin installing DragonFly, I already created a slice for it using FreeBSD-6.2 installer and I assume the same slice type of 165 that DragonFly is using but somehow it failed to detect existing FreeBSD partitions. So, what I did next is to try installing DragonFly on my 1GB SanDisk USB flash drive but somehow it failed to detect the device during installation. Although I know this USB drive's driver is supported by DragonFly as I've have tried plugging it on another PC with DragonFly.
da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SanDisk U3 Cruzer Micro 3.21> Removable Direct Access SCSI-2 device da0: Serial Number \^_ da0: 1.000MB/s transfers da0: 973MB (1994385 512 byte sectors: 64H 32S/T 973C) Thanks, Archimedes