Greetings with thanks to all responsible for a very desirable bsd. I'm a python/java/C user and scripter looking to setup a 2nd dragonfly bsd for basic usage where the first installation went perfectly, must now for a 2nd slightly different hw disable ACPI to complete boot since otherwise it stops at paralell port, which I don't have, detection.
The network my rationale is to get online is offline, where same config with another laptop's slightly different hardware same brand works fine (though leaving learning to do such as X config for nonroot and learning app adding and path updating) and this computer, 2nd in a small network where ifconfig outputs bge0: flags=....<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> ether [ip6 address] media:Ethernet autoselect (100baseT <full-duplex>) status:active After /sbin/dhclient bge0 it gets no link...sleeping and active turns to status: no carrier + how to install python for everybody and X for non-root usage which probably is learning to adjust my path, since I locate the python. please inform if informative. best regards H Niklas R
