On Mon, Jan 25, 2010 at 3:53 PM, Matthew Dillon <[email protected] > wrote:
> :How good is the Silicon Image 3124 chipset support in the sili(4) driver? > :Has it been well tested? > : > :Thanks, > :Tim > > I don't have a 3124 board or a machine with PCI-X slots to test with. > I believe the 3124 chipset spec is very similar to the 3132 spec which > means it should be easy to add support for the 3124 in our sili driver. > > Someone with a board and a slot is needed to do it. It might even > be possible that the only addition required is the PCI ID for the 3124 > in the sili_devices[] array in /usr/src/sys/dev/disk/sili/sili_attach.c. > > -Matt > Matthew Dillon > <[email protected]> > Cool, it "just works". I tried it today using a Rosewill RC-217 4-port SATA PCI card. I was able to create a Hammer volume and copy files to it. Attached is the dmesg: Thanks, Tim Copyright (c) 2003-2009 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly v2.4.1-RELEASE #14: Wed Sep 30 18:12:31 PDT 2009 [email protected]:/usr/obj/usr/src-misc/sys/GENERIC TSC clock: 1794108240 Hz, i8254 clock: 1193136 Hz CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1794.19-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 804519936 (785664K bytes) avail memory = 766943232 (748968K bytes) kbd1 at kbdmux0 Pentium Pro MTRR support enabled fildesc_drvinit() building stdin, stdout, stderr: md0: Malloc disk ACPI: RSDP 0xf6cc0 00014 (v0 ACPIAM) ACPI: RSDT 0x2ff40000 0002C (v1 A M I OEMRSDT 09000210 MSFT 00000097) ACPI: FACP 0x2ff40200 00081 (v2 A M I OEMFACP 09000210 MSFT 00000097) ACPI: DSDT 0x2ff40400 039D5 (v1 DELL DIM 4500 0000010A MSFT 0100000D) ACPI: FACS 0x2ff50000 00040 ACPI: APIC 0x2ff40300 00054 (v1 A M I OEMAPIC 09000210 MSFT 00000097) npx0: <math processor> on motherboard npx0: INT 16 interface Using XMM optimized bcopy/copyin/copyout acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Warning: ACPI is disabling APM's device. You can't run both acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu_cst0: <ACPI CPU C-State> on cpu0 acpi_button0: <Sleep Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 8 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xc800-0xc8ff mem 0xff7fc000-0xff7fffff,0xf0000000-0xf3ffffff irq 11 at device 0.0 on pci1 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 11 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 3 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 5 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> (vendor 0x8086, dev 0x24cd) at device 29.7 irq 9 pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 atapci0: <SiI 3124 SATA300 controller> port 0xdc00-0xdc0f mem 0xff9f0000-0xff9f7fff,0xff9ffc00-0xff9ffc7f irq 10 at device 1.0 on pci2 ata2: <ATA channel 0> on atapci0 ad4: 190782MB <SAMSUNG SP2004C VM100-33> at ata2-master SATA300 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 ata5: <ATA channel 3> on atapci0 em0: <Intel(R) PRO/1000 Network Connection 82540EM 6.9.6> port 0xd880-0xd8bf mem 0xff9a0000-0xff9bffff,0xff9c0000-0xff9dffff irq 11 at device 12.0 on pci2 em0: MAC address: 00:07:e9:0a:5a:1f isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH4 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci1 ad0: 38166MB <Seagate ST340014A 3.06> at ata0-master UDMA100 ata1: <ATA channel 1> on atapci1 acd0: DVDROM <LITEON DVD-ROM LTD163/GDHF> at ata1-master UDMA33 pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x24c3) at device 31.3 irq 11 pci0: <multimedia, audio> (vendor 0x8086, dev 0x24c5) at device 31.5 irq 11 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio2: can't drain, serial port might not exist, disabling ppc1: cannot reserve I/O port range ip: MPSAFE arp: MPSAFE CAM: Configuring 6 busses CAM: finished configuring all busses (0 left) cd0 at ata5 bus 0 target 0 lun 0 cd0: <LITEON DVD-ROM LTD163 GDHF> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: cd present [256858 x 2048 byte records] Mounting root from hammer:serno/3JX139HT.s1d tryroot serno/3JX139HT.s1d Mounting devfs
