Hi Sepherosa, Disabling the I/O APIC fixed it. :) Thanks
On Tue, Mar 13, 2012 at 8:36 AM, Sepherosa Ziehau <sepher...@gmail.com>wrote: > On Tue, Mar 13, 2012 at 1:38 PM, karim.allah.ah...@gmail.com > <karim.allah.ah...@gmail.com> wrote: > > Here's the whole output of dmesg ... > > > > XMMNNOOCopyright (c) 2003-2012 The DragonFly Project. > > Copyright (c) 1992-2003 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > sdt_probe: no RSDP > > fadt_probe: can't locate FADT > > madt_probe: can't locate MADT > > DragonFly v3.0.1-RELEASE #3: Mon Feb 20 16:41:19 MSK 2012 > > r...@df.v12.su:/usr/obj/home/justin/make_30/src/sys/GENERIC > > TSC clock: 2266498894 Hz, i8254 clock: 1193128 Hz > > CPU: QEMU Virtual CPU version 0.14.1 (2266.62-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x623 Stepping = 3 > > > > > Features=0x78bfbfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> > > Features2=0x80802001<SSE3,CX16,POPCNT,VMM> > > AMD Features=0x100000<NX> > > AMD Features2=0x1<LAHF> > > real memory = 1073341440 (1023 MB) > > avail memory = 1019428864 (972 MB) > > lapic: divisor index 0, frequency 500005880 Hz > > Initialize MI interrupts > > FQ scheduler policy version 1.1 loaded > > kbd1 at kbdmux0 > > disk scheduler: set policy of md0 to noop > > md0: Malloc disk > > ACPI Error: A valid RSDP was not found (20110211/tbxfroot-309) > > ACPI: Table initialisation failed: AE_NOT_FOUND > > ACPI: Try disabling either ACPI or apic support. > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > Using XMM optimized bcopy/copyin/copyout > > cryptosoft0: <software crypto> on motherboard > > pcib0: <MPTABLE Host-PCI bridge> pcibus 0 on motherboard > > pci0: <PCI bus> on pcib0 > > isab0: <PCI-ISA bridge> at device 1.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel PIIX3 WDMA2 controller> port > > 0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 1.1 on pci0 > > ata0: <ATA channel 0> on atapci0 > > disk scheduler: set policy of ad0 to noop > > ad0: 40960MB <QEMU HARDDISK 0.14.1> at ata0-master WDMA2 > > ata1: <ATA channel 1> on atapci0 > > disk scheduler: set policy of acd0 to noop > > acd0: CDROM <QEMU DVD-ROM/0.14.1> at ata1-master WDMA2 > > vgapci0: <VGA-compatible display> mem > > 0xf2000000-0xf2000fff,0xf0000000-0xf1ffffff at device 2.0 on pci0 > > re0: <RealTek 8139C+ 10/100BaseTX> port 0xc100-0xc1ff mem > > 0xf2020000-0xf20200ff irq 11 at device 3.0 on pci0 > > re0: Hardware rev. 0x74800000; MAC ver. 0x00; PCI32 33MHz > > miibus0: <MII bus> on re0 > > ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > re0: MAC address: 52:54:00:12:34:56 > > pmtimer0 on isa0 > > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > > kbd0 at atkbd0 > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: model IntelliMouse Explorer, device ID 4 > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > sio0: configured irq 4 not in bitmap of probed irqs 0 > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A > > sio1: can't drain, serial port might not exist, disabling > > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > > ppbus0: <Parallel port bus> on ppc0 > > plip0: <PLIP network interface> on ppbus0 > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > ppi0: <Parallel I/O> on ppbus0 > > CAM: Configuring 2 busses > > CAM: finished configuring all busses > > disk scheduler: set policy of cd0 to noop > > cd0 at ata1 bus 0 target 0 lun 0 > > cd0: <QEMU QEMU DVD-ROM 0.14> Removable CD-ROM SCSI-0 device > > cd0: 16.000MB/s transfers > > cd0: Attempt to query device size failed: NOT READY, Medium not present > > Mounting root from hammer:serno/QM00001.s1d > > tryroot serno/QM00001.s1d > > HAMMER(ROOT) recovery check seqno=00136a2a > > HAMMER(ROOT) recovery range 3000000002d262d0-3000000002d262d0 > > HAMMER(ROOT) recovery nexto 3000000002d262d0 endseqno=00136a2b > > HAMMER(ROOT) mounted clean, no recovery needed > > DMA space used: 152k, remaining available: 16384k > > Mounting devfs > > re0: watchdog timeout > > intr 11 on cpu0 at 40001/40000 hz, livelocked limit engaged! > > re0's interrupt is irq11, so it looks like re0 never considers the > interrupt is for him. Would it be possible that you could change the > emulated network device? > > Other option, set hw.ioapic_enable="0" in /boot/loader.conf > I am considering disabling I/O APIC on all virtual machines. > > Best Regards, > sephe > > -- > Tomorrow Will Never Die > -- Karim Allah Ahmed. LinkedIn <http://eg.linkedin.com/pub/karim-allah-ahmed/13/829/550/>
