Hi ,
I am getting the following error when trying to run dpdk ip pipeline example.Could someone please tell me what went wrong. system configuration: dpdk 2.2.0 ubuntu 14.04 network driver: /dpdk-2.2.0$ ./tools/dpdk_nic_bind.py --status Network devices using DPDK-compatible driver ============================================ 0000:04:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection' drv=igb_uio unused= Network devices using kernel driver =================================== 0000:04:00.1 '82599ES 10-Gigabit SFI/SFP+ Network Connection' if=eth3 drv=ixgbe unused=igb_uio 0000:05:00.0 'I350 Gigabit Network Connection' if=eth0 drv=igb unused=igb_uio *Active* 0000:05:00.1 'I350 Gigabit Network Connection' if=eth2 drv=igb unused=igb_uio Other network devices ===================== 0000:03:00.0 'Device 15ad' unused=igb_uio 0000:03:00.1 'Device 15ad' unused=igb_uio uml at uml:~/dpdk-2.2.0$ ./tools/dpdk_nic_bind.py --status Network devices using DPDK-compatible driver ============================================ 0000:04:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection' drv=igb_uio unused= Network devices using kernel driver =================================== 0000:04:00.1 '82599ES 10-Gigabit SFI/SFP+ Network Connection' if=eth3 drv=ixgbe unused=igb_uio 0000:05:00.0 'I350 Gigabit Network Connection' if=eth0 drv=igb unused=igb_uio *Active* 0000:05:00.1 'I350 Gigabit Network Connection' if=eth2 drv=igb unused=igb_uio Other network devices ===================== 0000:03:00.0 'Device 15ad' unused=igb_uio 0000:03:00.1 'Device 15ad' unused=igb_uio uml at uml:~/dpdk-2.2.0$ Here is the dump --------> ~/dpdk-2.2.0/examples/ip_pipeline/ip_pipeline/x86_64-native-linuxapp-gcc/app$ sudo -E ./ip_pipeline -f /home/uml/dpdk-2.2.0/examples/ip_pipeline/config/l2fwd.cfg -p 0x01 [sudo] password for uml: [APP] Initializing CPU core map ... [APP] CPU core mask = 0x0000000000000003 [APP] Initializing EAL ... EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Detected lcore 8 as core 0 on socket 0 EAL: Detected lcore 9 as core 1 on socket 0 EAL: Detected lcore 10 as core 2 on socket 0 EAL: Detected lcore 11 as core 3 on socket 0 EAL: Detected lcore 12 as core 4 on socket 0 EAL: Detected lcore 13 as core 5 on socket 0 EAL: Detected lcore 14 as core 6 on socket 0 EAL: Detected lcore 15 as core 7 on socket 0 EAL: Support maximum 128 logical core(s) by configuration. EAL: Detected 16 lcore(s) EAL: VFIO modules not all loaded, skip VFIO support... EAL: Setting up physically contiguous memory... EAL: Ask a virtual area of 0x40000000 bytes EAL: Virtual area found at 0x7f24c0000000 (size = 0x40000000) EAL: Requesting 1 pages of size 1024MB from socket 0 EAL: TSC frequency is ~1999998 KHz EAL: Master lcore 0 is ready (tid=bc483940;cpuset=[0]) EAL: lcore 1 is ready (tid=bad86700;cpuset=[1]) EAL: PCI device 0000:03:00.0 on NUMA socket 0 EAL: probe driver: 8086:15ad rte_ixgbe_pmd EAL: Not managed by a supported kernel driver, skipped EAL: PCI device 0000:03:00.1 on NUMA socket 0 EAL: probe driver: 8086:15ad rte_ixgbe_pmd EAL: Not managed by a supported kernel driver, skipped EAL: PCI device 0000:04:00.0 on NUMA socket 0 EAL: probe driver: 8086:10fb rte_ixgbe_pmd EAL: PCI memory mapped at 0x7f2500000000 EAL: PCI memory mapped at 0x7f2500080000 PMD: eth_ixgbe_dev_init(): MAC: 2, PHY: 18, SFP+: 5 PMD: eth_ixgbe_dev_init(): port 0 vendorID=0x8086 deviceID=0x10fb EAL: PCI device 0000:04:00.1 on NUMA socket 0 EAL: probe driver: 8086:10fb rte_ixgbe_pmd EAL: Not managed by a supported kernel driver, skipped EAL: PCI device 0000:05:00.0 on NUMA socket 0 EAL: probe driver: 8086:1521 rte_igb_pmd EAL: Not managed by a supported kernel driver, skipped EAL: PCI device 0000:05:00.1 on NUMA socket 0 EAL: probe driver: 8086:1521 rte_igb_pmd EAL: Not managed by a supported kernel driver, skipped [APP] Initializing MEMPOOL0 ... [APP] Initializing LINK0 (0) (1 RXQ, 1 TXQ) ... PMD: ixgbe_dev_rx_queue_setup(): sw_ring=0x7f24fb128340 sw_sc_ring=0x7f24fb127e00 hw_ring=0x7f24fb128880 dma_addr=0xffb128880 PMD: ixgbe_dev_tx_queue_setup(): sw_ring=0x7f24fb115c40 hw_ring=0x7f24fb117c80 dma_addr=0xffb117c80 PMD: ixgbe_set_tx_function(): Using simple tx code path PMD: ixgbe_set_tx_function(): Vector tx enabled. PMD: ixgbe_set_rx_function(): Vector rx enabled, please make sure RX burst size no less than 4 (port=0). [APP] LINK0 (0) (10 Gbps) UP [APP] Initializing MSGQ-REQ-PIPELINE0 ... [APP] Initializing MSGQ-RSP-PIPELINE0 ... [APP] Initializing MSGQ-REQ-CORE-s0c0 ... [APP] Initializing MSGQ-RSP-CORE-s0c0 ... [APP] Initializing MSGQ-REQ-PIPELINE1 ... [APP] Initializing MSGQ-RSP-PIPELINE1 ... [APP] Initializing MSGQ-REQ-CORE-s0c1 ... [APP] Initializing MSGQ-RSP-CORE-s0c1 ... [APP] Initializing PIPELINE0 ... pipeline> [APP] Initializing PIPELINE1 ... Cannot find LINK1 for RXQ1.0
