$ sudo build/ip_pipeline -f config/l3fwd.cfg -p 0x3 [APP] Initializing CPU core map ... PANIC in app_init_core_mask(): Cannot create CPU core mask 6: [build/ip_pipeline() [0x431b43]] 5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f6417199ec5]] 4: [build/ip_pipeline(main+0x5f) [0x4306ff]] 3: [build/ip_pipeline(app_init+0x1bff) [0x43feaf]] 2: [build/ip_pipeline(__rte_panic+0xc9) [0x42b11a]] 1: [build/ip_pipeline(rte_dump_stack+0x1a) [0x4c9fca]]
Cfg: [PIPELINE0] type = MASTER core = 0 [PIPELINE1] type = PASS-THROUGH core = 1 pktq_in = RXQ0.0 RXQ1.0 pktq_out = TXQ1.0 TXQ0.0 On Tue, Jan 26, 2016 at 1:18 AM, Singh, Jasvinder <jasvinder.singh at intel.com > wrote: > > > > > *From:* Royce Niu [mailto:royceniu at gmail.com] > *Sent:* Monday, January 25, 2016 5:10 PM > *To:* Singh, Jasvinder > *Cc:* Royce Niu; Thomas Monjalon; users at dpdk.org > *Subject:* Re: [dpdk-users] Request an example config for DPDK IP PIPELINE > > > > Thanks! > > > > I am not sure it is okay to ask an related question here: > > > > When I run any config in config folder, for example, l2fwd, there is > already an error: > > > > PANIC in app_init_core_mask(): > > Cannot create CPU core mask > > > > I only deleted two queues, since I have two interfaces. And other configs > in that folder will also cause this error. > > > > I am using DPDK 2.2 and sure the installation is good, since helloworld > and l2fwd (not pipeline) examples are ok. > > > > > > [Jasvinder]- What command are you using to run the l2fwd(pipeline)? Send > the error log. > > > > > > > > > > > > > > On Tue, Jan 26, 2016 at 1:00 AM, Singh, Jasvinder < > jasvinder.singh at intel.com> wrote: > > Hi Royce, > > > -----Original Message----- > > From: users [mailto:users-bounces at dpdk.org] On Behalf Of Royce Niu > > Sent: Monday, January 25, 2016 4:03 PM > > To: Thomas Monjalon > > Cc: users at dpdk.org > > Subject: Re: [dpdk-users] Request an example config for DPDK IP PIPELINE > > > > Thanks! > > > > Sorry to bother you again. > > If there any example config on firewall? > > I find http://dpdk.org/dev/patchwork/patch/5778/ from Google. > > However, the patch is not in both 2.2.0 and master. > > So, is the firewall usable? > > > > By the way, I will try my best to add the solution my problem in the doc. > > Firewall component exists in IP_Pipeline sample application. > Please check > > http://dpdk.org/browse/dpdk/tree/examples/ip_pipeline/config/edge_router_upstream.cfg > > In the above configuration file, firewall has been set up as first > pipeline in the chain. You can learn the configuration parameters of the > firewall from this file. > > For firewall rules, please check > > http://dpdk.org/browse/dpdk/tree/examples/ip_pipeline/config/edge_router_upstream.sh > > In the above script file, the rules have been defined for firewall > pipeline. > > > Thanks, > Jasvinder > > > > > > -- > > Regards, > > > > Royce Niu > -- Regards, Royce Niu
