Is there any fix available for bnx2x dpdk driver showing following error: bnx2x_attn_int_deasserted2 -- HW block attention set2 13:
EAL: Requesting 1024 pages of size 2MB from socket 0 EAL: TSC frequency is ~1799997 KHz EAL: Master lcore 1 is ready (tid=f7fe78c0;cpuset=[1]) EAL: PCI device 0000:03:00.0 on NUMA socket 0 EAL: probe driver: 15ad:7b0 rte_vmxnet3_pmd EAL: Not managed by a supported kernel driver, skipped EAL: PCI device 0000:0b:00.0 on NUMA socket 0 EAL: probe driver: 14e4:168e rte_bnx2x_pmd EAL: PCI memory mapped at 0x7fff713f3000 EAL: PCI memory mapped at 0x7fff70bf3000 EAL: PCI memory mapped at 0x7ffff7fa2000 EAL: PCI device 0000:0b:00.1 on NUMA socket 0 EAL: probe driver: 14e4:168e rte_bnx2x_pmd EAL: PCI memory mapped at 0x7fff703f3000 EAL: PCI memory mapped at 0x7fff6fbf3000 EAL: PCI memory mapped at 0x7ffff7f92000 pan_dpdk_init() mbuf_pool address is -- (nil) core_id:1, Successfully mmap dpdk pktmbuf_pool :0x7fffe2e7dec0 Total number of dpdk interface 2 Max queue size for port:0 - Rx queue:128, Tx queue:128 PMD: bnx2x_dev_rx_queue_setup(): fp[00] req_bd=1024, thresh=0, usable_bd=2040, total_bd=2048, rx_pages=4, cq_pages=32 PMD: bnx2x_dev_tx_queue_setup(): fp[00] req_bd=1024, thresh=512, usable_bd=2040, total_bd=2048, tx_pages=8 PANIC in bnx2x_attn_int_deasserted2(): HW block attention set213: [xyz() [0x402b11]]
