Thanks for your help. Regards
Dheeraj Dang On Thu, May 4, 2017 at 10:11 PM, Wiles, Keith <[email protected]> wrote: > > > On May 3, 2017, at 10:09 PM, Dheeraj Dang <[email protected]> > wrote: > > > > I want to send ICMP echo request using main buffer and UDP packets using > range buffer. > > > > Is it possible to do it simultaneously ? > > Unless you use two ports and a switch to the same destination port. One > port sending UDP via range and a Lua script sending ping4 commands via the > other port. > > Sorry, that is the best I can do. > > > > Regards > > Dheeraj Dang > > > > On Thu, May 4, 2017 at 1:11 AM, Wiles, Keith <[email protected]> > wrote: > > > > > > Sent from my iPhone > > > > > On May 3, 2017, at 2:07 AM, Dheeraj Dang <[email protected]> > wrote: > > > > > > Hi, > > > > > > I am running pktgen-dpdk and sending udp/icmp packets between 2 VMs > that > > > are on same > > > network. I am using range to send udp packets and ping4 to send icmp > > > packets. Receiver > > > gets all the packets when one type of packet is sent. Means, when I > sent > > > only udp packets, > > > receiver gets all udp packets and similar thing is observed for icmp > > > packets as well. But > > > when I sent both udp and icmp packets, only udp packets are received. > No > > > icmp packets are > > > observed on receiver side. > > > > > > > > > Is it possible to send ICMP (ping) packets simultaneously along with > UDP > > > packets (from > > > range buffer)? If so, how? > > > > Currently pktgen only send a icmp echo with ping4. In range mode you > should be able to send udp and icmp frame types not a echo frame. > > > > > > > > > > > Regards, > > > Dheeraj Dang > > > > Regards, > Keith > >
