Hello All
I have 2 OVS-DPDK installed - with the following below symmetric
configuration: see ***
When I send ping from a namespace (connected to the ovs-dpdk) - I see that the
packet is received at the peer via the dpdk interface - BUT not sent to the
vxlan port
See ### the tcpdump of the packet (captured at the br-phy in the peer) - the
packet looks OK but not sent to vxlan port for decap.
[note that in the TX direction - the behavior is OK - packet sent from
namespace to veth0 then to vxlan encap, then to dpdk interface --> eventually
the packet is received at the dpdk peer interface]
Can someone see any problem with my configuration ?
Best Regards
avi
***
utilities/ovs-vsctl show
8cdae740-9eb3-4b79-ad6f-bca0652c5d54
Bridge br-int
fail_mode: standalone
Port "vxlan0"
Interface "vxlan0"
type: vxlan
options: {remote_ip="172.31.100.80"} // the peer
has other ip
Port "veth0"
Interface "veth0"
Port br-int
Interface br-int
type: internal
Bridge br-phy
fail_mode: standalone
Port "dpdk0"
Interface "dpdk0"
type: dpdk
options: {dpdk-devargs="0000:00:03.0"}
Port br-phy
Interface br-phy
type: internal
###
10:27:15.201711 02:d7:d1:26:84:e5 (oui Unknown) > 02:fb:9e:ce:f2:0d (oui
Unknown), ethertype 802.1Q (0x8100), length 152: vlan 2047, p 0, ethertype
IPv4, ip-172-31-100-80.eu-central-1.compute.internal.58740 >
ip-172-31-100-44.eu-central-1.compute.internal.4789: VXLAN, flags [I] (0x08),
vni 0
7a:fd:3c:4c:ee:d3 (oui Unknown) > d2:ea:96:e1:ef:d2 (oui Unknown), ethertype
IPv4 (0x0800), length 98: 1.1.1.20 > 1.1.1.10: ICMP echo request, id 2235, seq
1176, length 64
