Yes. I did. # Compile PMD for Software backed device CONFIG_RTE_LIBRTE_PMD_OPENSSL=y CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n
-ugen -----Original Message----- From: Trahe, Fiona [mailto:[email protected]] Sent: 27 April 2018 15:49 To: Kudupudi, Ugendreshwar <[email protected]>; [email protected] Subject: RE: OpenSSL Crypto PMD Fails It's not enabled by default - have you enabled it in the config file? sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_OPENSSL\)=n,\1=y,' $RTE_OUTPUT/.config > -----Original Message----- > From: users [mailto:[email protected]] On Behalf Of Kudupudi, > Ugendreshwar > Sent: Wednesday, April 25, 2018 2:24 PM > To: [email protected] > Subject: [dpdk-users] OpenSSL Crypto PMD Fails > > Hello Team > > We are looking to execute the sample OpenSSL Crypto PMD and got the below > error. > > Environment Details: > ----------------------------- > > OS: Centos 7.3 (3.10.0) > DPDK: 17.11.2 > OpenSSL Version: 1.0.2k-fips > Ethernet: Intel X710 > Isolcpu: 0-3 > Link: https://dpdk.org/doc/guides/cryptodevs/openssl.html > > Any help in resolving this issue is deeply appreciated. > > ----------------------------------------- log start > ---------------------------------------------------------------------- > ------------ sudo ./examples/l2fwd-crypto/build/l2fwd-crypto -l 0-1 -n > 4 --vdev crypto_openssl -- -p 0x3 --chain CIPHER_HASH --cipher_op > ENCRYPT --cipher_algo AES_CBC --cipher_key > 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f --iv > 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff -- auth_op GENERATE > --auth_algo SHA1_HMAC --auth_key > 11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11: > 11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:1 > 1:11:11:11:11:11:11:11 > EAL: Detected 28 lcore(s) > ERROR: failed to parse device "crypto_openssl" > EAL: Unable to parse device 'crypto_openssl' > EAL: Error - exiting with code: 1 > Cause: Invalid EAL arguments > ----------------------------------------- log end > ---------------------------------------------------------------------- > ------------ > > > > We ran the NULL Crypto PMD successfully though. > > > > ----------------------------------------- log start > ---------------------------------------------------------------------- > ------------ > > sudo ./examples/l2fwd-crypto/build/l2fwd-crypto -l 1 -n 4 -- > vdev=crypto_null,socket_id=0,max_nb_sessions=128 -- -p 1 --cdev SW > --chain CIPHER_ONLY --cipher_algo null > EAL: Detected 28 lcore(s) > EAL: Probing VFIO support... > EAL: VFIO support initialized > EAL: PCI device 0000:01:00.0 on NUMA socket 0 > EAL: probe driver: 8086:1521 net_e1000_igb > EAL: PCI device 0000:01:00.1 on NUMA socket 0 > EAL: probe driver: 8086:1521 net_e1000_igb > EAL: PCI device 0000:02:00.0 on NUMA socket 0 > EAL: probe driver: 8086:1572 net_i40e > EAL: using IOMMU type 1 (Type 1) > PMD: Global register is changed during enable FDIR flexible payload > PMD: Global register is changed during support QinQ parser > PMD: Global register is changed during configure hash input set > PMD: Global register is changed during configure fdir mask > PMD: Global register is changed during configure hash mask > PMD: Global register is changed during support QinQ cloud filter > PMD: Global register is changed during support TPID configuration > EAL: PCI device 0000:02:00.1 on NUMA socket 0 > EAL: probe driver: 8086:1572 net_i40e > CRYPTODEV: [crypto_null] - Creating cryptodev crypto_null > > CRYPTODEV: [crypto_null] - Initialisation parameters - name: > crypto_null,socket id: 0, max queue pairs: 8, max sessions: 128 MAC > updating enabled Initializing port 0... Port 0, MAC address: > 3C:FD:FE:0D:1C:E0 > > > Checking link > status................................................................ > ..........................done > Port 0 Link Down > Lcore 1: RX port 0 > Allocated session pool on socket 0 > Lcore 1: cryptodev 0 > L2FWD: entering main loop on lcore 1 > L2FWD: -- lcoreid=1 portid=0 > L2FWD: -- lcoreid=1 cryptoid=0 > Options:- > nportmask: 1 > ports per lcore: 1 > refresh period : 10000 > single lcore mode: disabled > stats_printing: enabled > sessionless crypto: disabled > > Crypto chain: Input --> Encrypt --> Output > > ---- Cipher information --- > Algorithm: null > Cipher key: at [0x7fedbff38080], len=0 > IV: at [0x7fedbff34640], len=0 > > Port statistics ==================================== > Statistics for port 0 ------------------------------ > Packets sent: 0 > Packets received: 0 > Packets dropped: 0 > Crypto statistics ================================== > Statistics for cryptodev 0 ------------------------- > Packets enqueued: 0 > Packets dequeued: 0 > Packets errors: 0 > Aggregate statistics =============================== > Total packets received: 0 > Total packets enqueued: 0 > Total packets dequeued: 0 > Total packets sent: 0 > Total packets dropped: 0 > Total packets crypto errors: 0 > ==================================================== > ----------------------------------------- log end > ---------------------------------------------------------------------- > ------------ > > > Regards > Ugen
