Hi Hitoshi, Did you ever figure out a solution to your problem with the X710? I'm seeing the same problem with an XL710 using DPDK version 17.05 on Redhat 7.5:
validate_tcmap_parameter(): Enabled TC map 0x80 not applicable to HW support 0x1 i40e_vsi_setup(): Failed to update TC bandwidth i40e_pf_setup(): Setup of main vsi failed eth_i40e_dev_init(): Failed to setup pf switch: -63 Thanks, Aaron I am facing a failure of dpdk(16.11.3) initialization with testpmd > using i40e pmd on a specific physical port of X710-DA4. > > Without such specific port, testpmd can run successfully. > > My server box has two X710-DA4 cards and > these two cards have the same failure. > > To clarify whether it is caused by hardware failure or > by the lack of appropriate nic configuration, > the following build options of dpdk are enabled. > > -------------- > CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=y > CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=y > CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=y > -------------- > > My server box spec. is as follows : > > CPU : Intel(R) Xeon(R) Gold 6136 > MEMORY : 128GB (16G x 8) > Motherboard: SYS-1029U-TR4 > NIC1 : I350 x 4 (onboard nic) > NIC2 : XL710 dual > NIC3 : X710-DA4 > NIC4 : X710-DA4 > ------------------------------------------------------------ > OS : ubnutu 16.04.3 LTS(linux-image-4.4.0-87-generic) > DPDK : 16.11.3 > > testpmd's boot message is as follows : > -------------------------------------------- > $ sudo ./testpmd -- -i > > EAL: Detected 24 lcore(s) > EAL: Probing VFIO support... > EAL: PCI device 0000:18:00.0 on NUMA socket 0 > EAL: probe driver: 8086:1521 net_e1000_igb > EAL: PCI device 0000:18:00.1 on NUMA socket 0 > EAL: probe driver: 8086:1521 net_e1000_igb > EAL: PCI device 0000:18:00.2 on NUMA socket 0 > EAL: probe driver: 8086:1521 net_e1000_igb > EAL: PCI device 0000:18:00.3 on NUMA socket 0 > EAL: probe driver: 8086:1521 net_e1000_igb > EAL: PCI device 0000:86:00.0 on NUMA socket 1 > EAL: probe driver: 8086:1583 net_i40e > EAL: PCI device 0000:86:00.1 on NUMA socket 1 > EAL: probe driver: 8086:1583 net_i40e > EAL: PCI device 0000:af:00.0 on NUMA socket 1 > EAL: probe driver: 8086:1572 net_i40e > PMD: i40e_set_symmetric_hash_enable_per_port(): Symmetric hash has > already been disabled > PMD: eth_i40e_dev_init(): FW 5.0 API 1.5 NVM 05.00.05 eetrack 80002919 > PMD: i40e_update_default_filter_setting(): Cannot remove the default > macvlan filter > PMD: i40e_pf_setup(): i40e_vsi_setup finished > PMD: i40e_pf_setup(): Hardware capability of hash lookup table size: 512 > > PMD: i40e_update_flow_control(): Link auto negotiation not completed > EAL: PCI device 0000:af:00.1 on NUMA socket 1 > EAL: probe driver: 8086:1572 net_i40e > EAL: PCI device 0000:af:00.2 on NUMA socket 1 > EAL: probe driver: 8086:1572 net_i40e > PMD: i40e_set_symmetric_hash_enable_per_port(): Symmetric hash has > already been disabled > PMD: eth_i40e_dev_init(): FW 5.0 API 1.5 NVM 05.00.05 eetrack 80002919 > PMD: validate_tcmap_parameter(): Enabled TC map 0x80 not applicable to > HW support 0x1 > PMD: i40e_vsi_setup(): Failed to update TC bandwidth > PMD: i40e_pf_setup(): Setup of main vsi failed > PMD: eth_i40e_dev_init(): Failed to setup pf switch: -63 > rte_eth_dev_pci_probe: driver net_i40e: eth_dev_init(vendor_id=0x8086 > device_id=0x1572) failed > EAL: Error - exiting with code: 1 > Cause: Requested device 0000:af:00.2 cannot be used > --------------------------- > > If you have solutions, could you tell me how this problem can be resolved ? > > Regards, > Hitoshi > >
