Have you tried using --log-level=8 (or ="qat,8") on your process commandline? In conjunction with rebuilding with CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_DEBUG this should show if any cryptodev ops are being sent to QAT PMD.
Something else to try would be - can you run either dpdk-test-crypto-perf or the unit test application - just to validate that the process can run crypto on QAT PMD ok. Your setup for QAT looks ok. Also could you share the command-line you're using for each process please. > -----Original Message----- > From: users <[email protected]> On Behalf Of Joshi, Venkatesh > Sent: Wednesday, July 22, 2020 8:51 AM > To: [email protected] > Subject: [dpdk-users] DPDK-19.11 : IPSEC-SECGW tests not successful > > Hi, > > I'm not able to successfully run the IPSEC-SECGW tests with DPDK-19.11. I > have followed the guide > published at doc.dpdk.org but still not able to get things right. > > Please help me figure out what could be wrong. > > Here are the setup details: > > Network Diagram: > ------------------ > XL710 XL 710 > |---------------------|Port 1 IPSEC Tunnel Port > 1|----------------------| > | Intel board 1 > |<-------------------------------------->| Intel board 2 | > |---------------------| > |----------------------| > Port 0 ^ > ^ Port 0 (XL710) > (XL710) | > | > | |--------------------------------| > | > -------->|7 IXIA > 4|<------------------- > |--------------------------------| > > * Linux kernel: 4.14 > * DPDK version: 19.11 > * All ports are 40G ports (XL710 NICs) > * The intel board is: Intel(R) Xeon(R) Gold 5220 CPU > - has a single socket, 18 cores, 2 threads per core > * The QAT card: C62x > > > Issue: > -------- > * Traffic is sent from IXIA Port 4 to IXIA port 7: > - This is IP/UDP traffic of size 1024 bytes > - The dst mac is set to the MAC of port 0 of the XL710 NIC of Intel board 2 > - The src ip: 40.1.1.10, dst ip: 30.1.1.10 > - No packets are received on IXIA Port 7 > - On further debugging: Packets are not getting forwarded out of the IPSEC > tunnel from Intel board 2. > > On Intel board 1: > ------------------- > XL710 Port 0: b3:00.0 - bound to vfio-pci > XL710 Port 1: b3:00.1 - bound to vfio-pci > QAT VF: 0000:67:01.0 'Device 37c9' drv=vfio-pci > > Endpoint 0 config file: attached > Command-line and output file: attached > > On Intel board 2: > ------------------- > XL710 Port 0: 17:00.0 - bound to vfio-pci > XL710 Port 1: 17:00.1 - bound to vfio-pci > QAT VF: 0000:68:01.0 'Device 37c9' drv=vfio-pci > > Endpoint 1 config file: attached > Command-line and output file: attached > > > DPDK: > ------- > - config has the following set: > CONFIG_RTE_LIBRTE_PMD_QAT=y > CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y > > QAT driver version: qat1.7.l.4.9.0-00008 > ------------------------------------------- > Makefile has: ICP_SRIOV_AM=1 > ./configure --enable-icp-sriov=host > > > Please let me know if any additional information is required. > > > Regards, > Venkatesh > > > -------------- next part -------------- > An embedded and charset-unspecified text was scrubbed... > Name: intel-board1-cmdline-and-output.txt > URL: > <http://mails.dpdk.org/archives/users/attachments/20200722/3050bab3/attachment.txt> > -------------- next part -------------- > An embedded and charset-unspecified text was scrubbed... > Name: intel-board2-cmdline-and-output.txt > URL: > <http://mails.dpdk.org/archives/users/attachments/20200722/3050bab3/attachment-0001.txt>
