Hi, I'm looking for help with my setup
I bind VMXNET devices to DPDK vfio-pci driver. But the Ettus UHD example benchmark app show EAL error "Found no ports". What else can I check, to get this example app running UHD-3.15.LTS + DPDK 17.10 within my ESXI VM. Thanks ---- command line start ---- benchmark_rate --args="use_dpdk=1, ....." [INFO] [UHD] linux; GNU C++ version 9.3.0; Boost_107100; UHD_3.15.0.0-62-g7a3f1516 EAL: Detected 8 lcore(s) EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Error - exiting with code: 1 Cause: Error: Found no ports ---- command line end ---- ---- command line start ---- dpdk-devbind --status-dev net Network devices using DPDK-compatible driver ============================================ 0000:03:00.0 'VMXNET3 Ethernet Controller 07b0' drv=vfio-pci unused=vmxnet3,igb_uio 0000:0b:00.0 'VMXNET3 Ethernet Controller 07b0' drv=vfio-pci unused=vmxnet3,igb_uio 0000:13:00.0 'VMXNET3 Ethernet Controller 07b0' drv=vfio-pci unused=vmxnet3,igb_uio 0000:1b:00.0 'VMXNET3 Ethernet Controller 07b0' drv=vfio-pci unused=vmxnet3,igb_uio Network devices using kernel driver =================================== 0000:05:00.0 'VMXNET3 Ethernet Controller 07b0' if=eth0 drv=vmxnet3 unused=igb_uio,vfio-pci *Active* 0000:0d:00.0 'VMXNET3 Ethernet Controller 07b0' if=eth1 drv=vmxnet3 unused=igb_uio,vfio-pci *Active* 0000:14:00.0 'VMXNET3 Ethernet Controller 07b0' if=eth3 drv=vmxnet3 unused=igb_uio,vfio-pci *Active* 0000:1c:00.0 'VMXNET3 Ethernet Controller 07b0' if=eth4 drv=vmxnet3 unused=igb_uio,vfio-pci Other Network devices ===================== <none> ---- command line end ----