Yes , I have configured it via grub. Grub: "default_hugepagesz=1G hugepagesz=1G hugepages=2" grub2-mkconfig -o /boot/grub2/grub.cfg
Manual: mkdir /dev/hugepages1G mount -t hugetlbfs -o pagesize=1G none /dev/hugepages1G echo 2 > /sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages Regards Puneet On Wed, 26 May 2021 at 10:05, Nishant Verma <vnis...@gmail.com> wrote: > meminfo states: Hugepagesize: 1048576 kB > But in your initial mail you state Hugepage size is 1G. > > have you configured HugePage via grub.... ? > > > Thanks. > > Regards, > NV > > On Wed, May 26, 2021 at 12:21 AM Truring Team <trurin...@gmail.com> wrote: > >> Hi Nishant, >> >> cat /proc/meminfo >> 11:59:29.200 §MemTotal: 23101672 kB >> 11:59:29.200 §MemFree: 15254764 kB >> 11:59:29.200 §MemAvailable: 19243184 kB >> 11:59:29.200 §Buffers: 6792 kB >> 11:59:29.201 §Cached: 4084844 kB >> 11:59:29.201 §SwapCached: 0 kB >> 11:59:29.201 §Active: 3609016 kB >> 11:59:29.201 §Inactive: 1175160 kB >> 11:59:29.201 §Active(anon): 695644 kB >> 11:59:29.202 §Inactive(anon): 19716 kB >> 11:59:29.202 §Active(file): 2913372 kB >> 11:59:29.202 §Inactive(file): 1155444 kB >> 11:59:29.202 §Unevictable: 0 kB >> 11:59:29.202 §Mlocked: 0 kB >> 11:59:29.203 §SwapTotal: 11665404 kB >> 11:59:29.204 §SwapFree: 11665404 kB >> 11:59:29.204 §Dirty: 32 kB >> 11:59:29.204 §Writeback: 0 kB >> 11:59:29.204 §AnonPages: 694764 kB >> 11:59:29.205 §Mapped: 140220 kB >> 11:59:29.205 §Shmem: 22800 kB >> 11:59:29.205 §Slab: 445016 kB >> 11:59:29.205 §SReclaimable: 289968 kB >> 11:59:29.205 §SUnreclaim: 155048 kB >> 11:59:29.206 §KernelStack: 16624 kB >> 11:59:29.206 §PageTables: 35892 kB >> 11:59:29.206 §NFS_Unstable: 0 kB >> 11:59:29.206 §Bounce: 0 kB >> 11:59:29.206 §WritebackTmp: 0 kB >> 11:59:29.207 §CommitLimit: 22167664 kB >> 11:59:29.207 §Committed_AS: 4342668 kB >> 11:59:29.207 §VmallocTotal: 34359738367 kB >> 11:59:29.207 §VmallocUsed: 463188 kB >> 11:59:29.207 §VmallocChunk: 34358835196 kB >> 11:59:29.208 §HardwareCorrupted: 0 kB >> 11:59:29.208 §AnonHugePages: 329728 kB >> 11:59:29.208 §CmaTotal: 0 kB >> 11:59:29.209 §CmaFree: 0 kB >> 11:59:29.209 §HugePages_Total: 1024 >> 11:59:29.209 §HugePages_Free: 1019 >> 11:59:29.209 §HugePages_Rsvd: 0 >> 11:59:29.209 §HugePages_Surp: 0 >> 11:59:29.209 §Hugepagesize: 2048 kB >> 11:59:29.209 §DirectMap4k: 381760 kB >> 11:59:29.209 §DirectMap2M: 13973504 kB >> 11:59:29.215 §DirectMap1G: 11534336 kB >> >> Regards >> >> >> On Wed, 26 May 2021 at 09:43, Nishant Verma <vnis...@gmail.com> wrote: >> >>> Can you paste output of /proc/meminfo ? >>> >>> >>> >>> Regards, >>> NV >>> >>> On Tue, May 25, 2021 at 9:52 PM Truring Team <trurin...@gmail.com> >>> wrote: >>> >>>> Hi Team, >>>> >>>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK >>>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE >>>> Controller but facing following issues: >>>> >>>> If someone can look into the following logs and help me figure out the >>>> issue? >>>> >>>> >>>> >>>> 1. DPDK 20.11 ( Using 1 GB hugepages) >>>> >>>> gdb ./dpdk-testpmd >>>> >>>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7 >>>> >>>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc. >>>> >>>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later >>>> http://gnu.org/licenses/gpl.html >>>> >>>> 12:45:59.349 §This is free software: you are free to change and >>>> redistribute it. >>>> >>>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law. >>>> Type >>>> "show copying" >>>> >>>> 12:45:59.349 §and "show warranty" for details. >>>> >>>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu". >>>> >>>> 12:45:59.351 §For bug reporting instructions, please see: >>>> >>>> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/... >>>> >>>> 12:45:59.415 §Reading symbols from >>>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging >>>> symbols >>>> found)...done. >>>> >>>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i >>>> >>>> 12:46:11.493 §Starting program: >>>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i >>>> >>>> 12:46:11.717 §[Thread debugging using libthread_db enabled] >>>> >>>> 12:46:11.719 §Using host libthread_db library >>>> "/lib64/libthread_db.so.1". >>>> >>>> 12:46:11.768 §EAL: Detected 6 lcore(s) >>>> >>>> 12:46:11.769 §EAL: Detected 1 NUMA nodes >>>> >>>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)] >>>> >>>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket >>>> >>>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)] >>>> >>>> 12:46:11.792 §EAL: Selected IOVA mode 'PA' >>>> >>>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB >>>> >>>> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB >>>> >>>> 12:46:11.854 §EAL: Probing VFIO support... >>>> >>>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)] >>>> >>>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)] >>>> >>>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)] >>>> >>>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)] >>>> >>>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)] >>>> >>>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device: >>>> 0000:65:00.0 (socket 0) >>>> >>>> 12:46:11.915 § >>>> >>>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault. >>>> >>>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () >>>> >>>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install >>>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64 >>>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64 >>>> zlib-1.2.7-19.el7_9.x86_64 >>>> >>>> 12:46:14.542 §(gdb) bt >>>> >>>> 12:46:14.548 §#0 0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () >>>> >>>> 12:46:14.548 §#1 0x0000000000eb811e in ecore_hw_init () >>>> >>>> 12:46:14.549 §#2 0x0000000000ef7397 in qed_slowpath_start () >>>> >>>> 12:46:14.549 §#3 0x0000000000ef0483 in qede_common_dev_init () >>>> >>>> 12:46:14.549 §#4 0x0000000000ef1113 in qede_eth_dev_pci_probe () >>>> >>>> 12:46:14.549 §#5 0x0000000000a4450b in pci_probe () >>>> >>>> 12:46:14.550 §#6 0x00000000009dbc6c in rte_bus_probe () >>>> >>>> 12:46:14.550 §#7 0x00000000009fa91c in rte_eal_init () >>>> >>>> 12:46:14.617 §#8 0x0000000000425db1 in main () >>>> >>>> 12:46:17.052 §(gdb) quit >>>> >>>> 12:46:17.056 §A debugging session is active. >>>> >>>> 12:46:17.056 § >>>> >>>> 12:46:17.057 § Inferior 1 [process 23180] will be killed. >>>> >>>> >>>> >>>> >>>> >>>> 2. *DPDK 21.05:* >>>> >>>> ./dpdk-testpmd -l 0-5 -n4 -- -i >>>> >>>> 12:46:46.257 §EAL: Detected 6 lcore(s) >>>> >>>> 12:46:46.257 §EAL: Detected 1 NUMA nodes >>>> >>>> 12:46:46.258 §EAL: Detected static linkage of DPDK >>>> >>>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket >>>> >>>> 12:46:46.285 §EAL: Selected IOVA mode 'PA' >>>> >>>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0 >>>> >>>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported >>>> >>>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: >>>> 0000:65:00.0 (socket 0) >>>> >>>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the >>>> MCP >>>> scratch-pad is not configured >>>> >>>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized >>>> >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not >>>> initialized! >>>> >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not >>>> initialized >>>> >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW >>>> information >>>> >>>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed >>>> >>>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe >>>> failed rc -3 >>>> >>>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used >>>> >>>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created >>>> >>>> 12:46:46.423 §testpmd: No probed ethernet devices >>>> >>>> 12:46:46.461 §Interactive-mode selected >>>> >>>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456, >>>> size=2176, socket=0 >>>> >>>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc >>>> >>>> 12:46:46.540 §Done >>>> >>>> >>>> >>>> >>>> >>>> System Information: >>>> >>>> *ethtool -i p2p1* >>>> driver: qede >>>> version: 8.33.0.20 >>>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0* >>>> expansion-rom-version: >>>> bus-info: 0000:65:00.0 >>>> supports-statistics: yes >>>> supports-test: yes >>>> supports-eeprom-access: no >>>> supports-register-dump: yes >>>> supports-priv-flags: yes >>>> >>>> >>>> >>>> *ethtool -i p2p2 *driver: qede >>>> version: 8.33.0.20 >>>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0 >>>> expansion-rom-version: >>>> bus-info: 0000:65:00.1 >>>> supports-statistics: yes >>>> supports-test: yes >>>> supports-eeprom-access: no >>>> supports-register-dump: yes >>>> supports-priv-flags: yes >>>> >>>> >>>> >>>> >>>> >>>> *lspci -nn | grep Ether* >>>> >>>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and >>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] >>>> >>>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and >>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] >>>> >>>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ >>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) >>>> >>>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ >>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) >>>> >>>> >>>> >>>> cd /lib/firmware/qed/ >>>> >>>> ls >>>> >>>> 12:48:27.269 §qed_init_values-8.10.9.0.bin >>>> qed_init_values-8.30.12.0.bin >>>> qed_init_values_zipped-8.10.5.0.bin >>>> qed_init_values_zipped-8.33.11.0.bin qed_init_values_zipped-8.7.3.0.bin >>>> >>>> 12:48:27.272 §qed_init_values-8.14.6.0.bin >>>> qed_init_values-8.33.12.0.bin >>>> qed_init_values_zipped-8.15.3.0.bin >>>> qed_init_values_zipped-8.37.2.0.bin >>>> >>>> 12:48:27.273 §qed_init_values-8.18.9.0.bin >>>> qed_init_values-8.40.33.0.bin >>>> qed_init_values_zipped-8.20.0.0.bin >>>> qed_init_values_zipped-8.37.7.0.bin >>>> >>>> 12:48:27.275 §qed_init_values-8.20.0.0.bin >>>> qed_init_values_zipped-8.10.10.0.bin >>>> qed_init_values_zipped-8.33.1.0.bin >>>> qed_init_values_zipped-8.4.2.0.bin >>>> >>>> >>>> Best Regards >>>> >>>> Puneet >>>> >>>