Right now we are using an Intel XEON and to be able to enable turbo boost we had to change a setting (Power performance tuning) in the BIOS sticking it to "OS control EPB". Is there something to do in the BIOS of EPYC?
Il giorno mar 26 apr 2022 alle ore 18:25 Antonio Di Bacco < [email protected]> ha scritto: > That's fantastic: > > # sudo cpupower -c 99 frequency-info info > analyzing CPU 99: > driver: acpi-cpufreq > CPUs which run at the same hardware frequency: 99 > CPUs which need to have their frequency coordinated by software: 99 > maximum transition latency: Cannot determine or is not supported. > hardware limits: 1.50 GHz - 3.72 GHz > available frequency steps: 2.00 GHz, 1.70 GHz, 1.50 GHz > available cpufreq governors: conservative ondemand userspace powersave > performance schedutil > current policy: frequency should be within 1.50 GHz and 3.72 GHz. > The governor "userspace" may decide which speed to use > within this range. > current CPU frequency: 2.00 GHz (asserted by call to hardware) > boost state support: > Supported: yes > Active: yes > Boost States: 0 > Total States: 3 > Pstate-P0: 2000MHz > Pstate-P1: 1700MHz > Pstate-P2: 1500MHz > > Il giorno mar 26 apr 2022 alle ore 12:00 Tummala, Sivaprasad < > [email protected]> ha scritto: > >> [AMD Official Use Only - General] >> >> >> >> Hi Antonio, >> >> >> >> We are looking into this. Could you please share the below info: >> >> # cpupower -c <lcore> frequency-info info >> >> analyzing CPU <lcore>: >> >> driver: acpi-cpufreq >> >> >> >> >> >> *From:* Antonio Di Bacco <[email protected]> >> *Sent:* Monday, April 25, 2022 10:43 PM >> *To:* [email protected] >> *Subject:* AMD EPYC 7713 64-Core: cannot enable turbo boost >> >> >> >> [CAUTION: External Email] >> >> Trying to enable turbo boost on EPYC 7713 with this APIS: >> >> >> >> rte_power_init(lcore) >> rte_power_freq_enable_turbo(lcore) >> rte_power_freq_max(lcore) >> >> >> >> I receive this messages: >> >> >> >> DPDK:POWER: Env isn't set yet! >> DPDK:POWER: Attempting to initialise ACPI cpufreq power management... >> DPDK:POWER: Power management governor of lcore 99 has been set to >> 'userspace' successfully >> DPDK:POWER: Initialized successfully for lcore 99 power management >> DPDK:POWER: Failed to enable turbo on lcore 99 >> >
