Thanks for you answer, Already red the doc on the subject but can't make it work in testpmd. Didn't implemented it myself at this step but seams I'm missing something.
Do I need to enable a specific offload ? From: Asaf Penso [mailto:[email protected]] Sent: lundi 2 mai 2022 09:59 To: Antoine POLLENUS <[email protected]>; [email protected]; Slava Ovsiienko <[email protected]> Subject: RE: [ConnectX 6Dx]Issue using Tx scheduling feature in DPDK Hello Antoine, Have you had a look into mlx5 documentation? http://doc.dpdk.org/guides/nics/mlx5.html Please look for tx_pp. I'm adding @Slava Ovsiienko<mailto:[email protected]> in case you need further support. Regards, Asaf Penso From: Antoine POLLENUS <[email protected]<mailto:[email protected]>> Sent: Thursday, April 28, 2022 3:25 PM To: [email protected]<mailto:[email protected]> Subject: [ConnectX 6Dx]Issue using Tx scheduling feature in DPDK Hello, DPDK Version: 21.11 Firmware version : 22.32.1010 MLNX_OFED version: MLNX_OFED_LINUX-5.5-1.0.3.2-ubuntu20.04-x86_64 We are trying to use the DPDK tx scheduling feature on a ConnectX6 DX adapter. We experience some issues with the feature not working. The test is using Test-pmd in txonly mode. Here are the command used: sudo ./dpdk-testpmd -l 0-3 -n 4 -- -i --portmask=0x1 --nb-cores=1 --eth-peer=0,01:00:5e:00:00:08 --tx-ip=10.10.1.168,239.0.0.8 testpmd> set fwd txonly testpmd> set burst 64 testpmd> set txtimes 1000000,10000 By doing this I expect the feature working. Am i missing something ? I also added a print in txonly.c and clearly sees that the feature is not enabled dynf = rte_mbuf_dynflag_lookup (RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME, NULL); if (dynf >= 0) timestamp_mask = 1ULL << dynf; dynf = rte_mbuf_dynfield_lookup (RTE_MBUF_DYNFIELD_TIMESTAMP_NAME, NULL); if (dynf >= 0) timestamp_off = dynf; both function ( rte_mbuf_dynfield_lookup and rte_mbuf_dynflag_lookup) returns -1 I also tried to enabled the feature. testpmd> port config 0 tx_offload send_on_timestamp on but when doing this DPDK tells me that I don't have these offload capabilities Hope you will be able to help me. Regards Antoine
