Hi Adam, Try to add "group 2", like: >flow create 0 group 2 ingress pattern eth ...
пт, 24 янв. 2025 г. в 16:53, Adam Kiripolský <adam.kiripol...@cesnet.cz>: > Hello all, > > Ita stumbled upon an issue with rte_flow 'count' and 'mark' actions on > DPDK version 23.11 and higher on Intel ice driver. > By the table at https://doc.dpdk.org/guides/nics/overview.html ice > driver should support these actions. > > Specifications: > > NIC version: E810-C, 2x100G > Firmware version: 4.7 > Kernel Driver: 1.16.3 > DDP: 1.3.39.1 > DDP Comms 1.3.46.0 > > DPDK versions that did not accept the rules: 23.11, 24.11 > > Testpmd start: sudo dpdk-testpmd -a 0000:af:00.1 > --log-level=pmd.net.ice.driver:8 --file-prefix=sad -l 0,1 -- --txq=4 > --rxq=4 -i --disable-rss > > input: > testpmd> flow create 0 ingress pattern eth / ipv4 dst is 159.58.1.0 src > is 195.168.1.0 / end actions count identifier 128 / drop / end > > output: > ice_flow_create(): Failed to create flow > port_flow_complain(): Caught PMD error type 16 (specific action): cause: > 0x7ffc0c519398, Invalid action type: Invalid argument > > input: > testpmd> flow create 0 ingress pattern eth / ipv4 dst is 159.58.1.0 src > is 195.168.1.0 / end actions mark id 2 / drop / end > > output: > ice_flow_create(): Failed to create flow > port_flow_complain(): Caught PMD error type 16 (specific action): cause: > 0x7fffc6ce9648, Invalid action type: Invalid argument > > However, on DPDK version 23.07 both rules are accepted without an issue. > > Were these features deprecated? Alternatively, is there any workaround > for counting packets matched against a rule? > > Thanks, > Adam. > > -- Regards, Vladimir
