Hi Stephen, Thanks, I will try your suggestion, appreciate your help. Regards, Ed
-----Original Message----- From: Stephen Hemminger <step...@networkplumber.org> Sent: Thursday, May 1, 2025 4:29 PM To: users@dpdk.org Subject: Re: Intel E810 and X710 NIC DMA control External Email: This message originated outside of NETSCOUT. Do not click links or open attachments unless you recognize the sender and know the content is safe. On Thu, 1 May 2025 19:36:54 +0000 "Lombardo, Ed" <ed.lomba...@netscout.com> wrote: > Hi, > I want control the Intel NICs (E810 and X710) DMA to either the hugepage > memory on socket 0 or socket 1. Is there a way to do this in DPDK 24.11? > > I have created two mempools, one on socket 0 and one on socket 1. Now when > packets arrive at the NIC receive ports (1 and 2) I only see mbufs in > mempool on the CPU socket where the NIC is located being used to . > > Thanks, > Ed The NIC will use the mempool you pass during configuration in rte_eth_rx_queue_setup() You can also get more detailed with rx segment splitting.
