On 2 January 2016 at 23:59, Sepherosa Ziehau <[email protected]> wrote: > I have pushed some changes to the re's PHY initialization, you could > try latest usb image; hope it works for you. > > Thanks, > sephe
The build is finished and I don't see re0 with ifconfig. I checked your commits against mine just to make sure I did the build correctly and I see the changes you made. I was on: DragonFly fly.in.lylie.net 4.5-DEVELOPMENT DragonFly v4.5.0.263.g9261e-DEVELOPMENT #0: Thu Dec 31 16:13:10 UTC 2015 [email protected]:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 Now on: DragonFly fly.in.lylie.net 4.5-DEVELOPMENT DragonFly v4.5.0.282.g5b1a5-DEVELOPMENT #0: Sun Jan 3 01:11:07 PST 2016 [email protected]:/usr/obj/usr/src/sys/X86_64_GENERIC x86_64 I see the same dmesg: % dmesg | grep re0 re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xb2100000-0xb2103fff,0xb2104000-0xb2104fff irq 18 at device 0.0 on pci2 re0: Hardware rev. 0x50800000; PCI-E 125MHz re0: PHY write failed re0: PHY write failed re0: MII without any phy! device_probe_and_attach: re0 attach returned 6 re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xb2100000-0xb2103fff,0xb2104000-0xb2104fff irq 18 at device 0.0 on pci2 re0: Hardware rev. 0x50800000; PCI-E 125MHz re0: PHY write failed re0: PHY write failed re0: MII without any phy! device_probe_and_attach: re0 attach returned 6 % ifconfig ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2290 ether 30:52:cb:a3:cf:a7 media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng status: associated faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::3252:cbff:fea3:cfa7%wlan0 prefixlen 64 scopeid 0x6 inet 192.168.0.56 netmask 0xffffff00 broadcast 192.168.0.255 ether 30:52:cb:a3:cf:a7 ssid somuch_ channel 6 (2437 MHz 11g ht/20) bssid 64:70:02:32:c2:48 regdomain 108 indoor ecm authmode WPA privacy ON deftxkey UNDEF TKIP 3:128-bit txpower 20 bmiss 7 scanvalid 60 protmode CTS ampdulimit 64k shortgi wme burst roaming MANUAL media: IEEE 802.11 Wireless Ethernet MCS mode 11ng status: associated urtwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 2290 ether 80:1f:02:68:5d:39 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier pciconf -lv: re0@pci0:2:0:0: class=0x020000 card=0x200f1043 chip=0x816810ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller' class = network subclass = ethernet Any ideas? -- ------- inum: 883510009027723 sip: [email protected] xmpp: [email protected]
