Hello I have the same usb wifi stick, and I see the same error, but that does not prevent it from working. Can you check that the rest of the setup in /etc/rc.conf is fine? I have
dhcpcd_enable="YES" and the rest is the urtwn, wlans and wpa_supplicant as in the handbook. Check that the wpa_supplicant connects. Check that the dhcpcd is running; or restart it to be sure. Cheers Peeter -- On Mon, Apr 13, 2020 at 11:35 PM Ron Georgia <netve...@gmail.com> wrote: > > All, > > I have a USB Wifi adapter (MAC/BB RTL8188CUS, RF 6052 1T1R) that is > having problems initializing. I did do some poking around and updated > loader.conf (see below) but that does not seem to help. When I do and > ifconfig wlan0 I see the SSID, but not IPv4, instead I see a "driver > didn't set altq_maxlen" error. This is not a new USB adapter, maybe 3 or > 4 years old. I am able to scan the networks with ifconfig wlan0 scan, > but I cannot connect to my home network (yes, the password is correct.) > Not sure what might be needed. I can post my full dmesg in paste bin if > that helps. > > Some Info: > > % ifconfig | grep -B3 -i wireless > country US authmode WPA2/802.11i privacy ON deftxkey UNDEF > AES-CCM 3:128-bit txpower 0 bmiss 7 scanvalid 60 protmode CTS wme > roaming MANUAL > media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g > > % sysctl net.wlan.devices > net.wlan.devices: urtwn0 > > filtered dmesg: > > ess: 74:da:38:41:1c:68 > rgeorgia@mini01% dmesg | grep urtw > urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 4> > on usbus0 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > urtwn0: enabling 11n > urtwn-rtl8192cfwT: You need to read the LICENSE file in > /usr/share/doc/legal/realtek/. > urtwn-rtl8192cfwT: If you agree with the license, set > legal.realtek.license_ack=1 in /boot/loader.conf. > module_register_init: MOD_LOAD (urtwn_rtl8192cfwT_fw, ffffffff82b73fa0, > 0) error 1 > urtwn-rtl8192cfwT: firmware image loaded, but did not register > urtwn0: failed loadfirmware of file urtwn-rtl8192cfwT > urtwn-rtl8192cfwT: could not load firmware image, error 17 > urtwn0: failed loadfirmware of file urtwn-rtl8192cfwT > urtwn-rtl8192cfwT: could not load firmware image, error 17 > urtwn0: failed loadfirmware of file urtwn-rtl8192cfwT > urtwn-rtl8192cfwT: could not load firmware image, error 17 > urtwn0: failed loadfirmware of file urtwn-rtl8192cfwT > urtwn0: at uhub0, port 2, addr 4 (disconnected) > urtwn0: detached > urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 1> > on usbus0 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > urtwn0: enabling 11n > urtwn0: at uhub0, port 2, addr 1 (disconnected) > urtwn0: detached > urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 7> > on usbus0 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > urtwn0: enabling 11n > urtwn1: <vendor 0x0bda product 0x8176, class 0/0, rev 2.00/2.00, addr 8> > on usbus0 > urtwn1: MAC/BB RTL8188CUS, RF 6052 1T1R > urtwn1: enabling 11n > urtwn1: at uhub0, port 1, addr 8 (disconnected) > urtwn1: detached > urtwn1: <vendor 0x0bda product 0x8176, class 0/0, rev 2.00/2.00, addr 9> > on usbus0 > urtwn1: MAC/BB RTL8188CUS, RF 6052 1T1R > urtwn1: enabling 11n > urtwn0: at uhub1, port 3, addr 7 (disconnected) > urtwn0: detached > urtwn1: at uhub0, port 2, addr 9 (disconnected) > urtwn1: detached > urtwn0: <vendor 0x0bda product 0x8176, class 0/0, rev 2.00/2.00, addr > 10> on usbus0 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > urtwn0: enabling 11n > urtwn0: at uhub1, port 3, addr 10 (disconnected) > urtwn0: detached > urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr > 11> on usbus0 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > urtwn0: enabling 11n > urtwn0: at uhub1, port 3, addr 11 (disconnected) > urtwn0: detached > urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 2> > on usbus0 > urtwn0: MAC/BB > urtwn0: enabling 11n > urtwn0: at uhub1, port 3, addr 2 (disconnected) > urtwn0: detached > urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 5> > on usbus0 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > urtwn0: enabling 11n > urtwn0: at uhub0, port 2, addr 5 (disconnected) > urtwn0: detached > urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 1> > on usbus0 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > urtwn0: enabling 11n > urtwn0: at uhub0, port 2, addr 1 (disconnected) > urtwn0: detached > urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 1> > on usbus0 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > urtwn0: enabling 11n > > /boot/loader.conf > > vfs.root.mountfrom="hammer2:serno/50026B726B053990.s1d" > legal.realtek.license_ack=1 > if_urtwn_load="YES" > urtwn-rtl8192cfwT_load="YES" > urtwn-rtl8192cfwU_load="YES" > urtwn-rtl8188eufw_load="YES" > > -- > “90% of my problems are due to ignorance, the other 10% is because I just > don’t know any better.” >