Hi. I never received any responses to this. Hoping it was just because that was a busy time of year. Trying again. Thanks, Scott
From: Scott Hawley <[email protected]<mailto:[email protected]>> Date: Friday, December 20, 2013 1:19 PM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: [Users] CarpetReduce: Formerly working par file now yields 'Simulation domain volume and reduction weight sum differ' Hi, I'm pretty sure I haven't changed a par file which "used to work." Now I'm getting the 'Simulation domain volume and reduction weight sum differ' error. I've read a few previous posts about this... http://lists.einsteintoolkit.org/pipermail/users/2011-September/001457.html http://lists.einsteintoolkit.org/pipermail/users/2012-September/002540.html http://lists.einsteintoolkit.org/pipermail/trac/2011-October/002465.html ...but haven't understood how they apply to my case. I'm not using CarpetMask, and haven't changed anything about the boundary points or grid structure. Can anyone offer a suggestion? Thanks. Output log and par file follow. -Scott % /opt/local/bin/openmpirun -np 1 ./exe/cactus_bruiser -roe --logdir=log /Users/shawley/runs/cactus/bruiser/bruiser_test.par IN DIRECTORY: /Users/shawley/Cactus -------------------------------------------------------------------------------- 10 1 0101 ************************ 01 1010 10 The Cactus Code V4.0 1010 1101 011 www.cactuscode.org 1001 100101 ************************ 00010101 100011 (c) Copyright The Authors 0100 GNU Licensed. No Warranty 0101 -------------------------------------------------------------------------------- Cactus version: 4.1.1 Compile date: Dec 20 2013 (12:34:14) Run date: Dec 20 2013 (13:02:27-0600) Run host: (pid=99492) WARNING level 1 in thorn CarpetReduce processor 0 host Working directory: /Users/shawley/Cactus (line 137 of /Users/shawley/.mojaveconfig/Cactus/bruiser/build/CarpetReduce/mask_test.c): Executable: ./exe/cactus_bruiser -> Simulation domain volume and reduction weight sum differ Parameter file: /Users/shawley/runs/cactus/bruiser/bruiser_test.par -------------------------------------------------------------------------------- % cat bruiser_test.par | grep -v '^#' Cactus::cctk_run_title = "BruiserSetBG, FMR BBH" Cactus::cctk_full_warnings = yes Cactus::cctk_itlast = 0 ActiveThorns = "AEILocalInterp Boundary CartGrid3D CoordBase SymBase Slab Carpet CarpetLib CarpetInterp CarpetReduce CarpetSlab CarpetRegrid IOUtil SphericalSurface NaNChecker ADMBase ADMCoupling ADMMacros CoordGauge SpaceMask StaticConformal BruiserSetBG BruiserConstraints AHFinderDirect ADMAnalysis ADMConstraints LoopControl InitBase CarpetIOBasic CarpetIOScalar CarpetIOASCII TimerReport TmunuBase GenericFD" ActiveThorns = "CarpetIOHDF5 CarpetIOASCII" SphericalSurface::nsurfaces = 3 SphericalSurface::maxntheta = 39 SphericalSurface::maxnphi = 76 SphericalSurface::ntheta [0] = 39 SphericalSurface::nphi [0] = 76 SphericalSurface::nghoststheta[0] = 2 SphericalSurface::nghostsphi [0] = 2 SphericalSurface::ntheta [1] = 39 SphericalSurface::nphi [1] = 76 SphericalSurface::nghoststheta[1] = 2 SphericalSurface::nghostsphi [1] = 2 SphericalSurface::ntheta [2] = 39 SphericalSurface::nphi [2] = 76 SphericalSurface::nghoststheta[2] = 2 SphericalSurface::nghostsphi [2] = 2 IO::out_dir = $parfile Carpet::domain_from_coordbase = yes driver::ghost_size = 4 InitBase::initial_data_setup_method="init_all_levels" Carpet::prolongation_order_time = 0 Carpet::prolongation_order_space = 1 Carpet::convergence_level = 0 ADMMacros::spatial_order = 4 ADMBase::initial_data = "BruiserSetBG, Kerr-Schild" ADMBase::lapse_timelevels = 2 ADMBase::shift_timelevels = 2 ADMConstraints::constraints_timelevels = 2 ADMBase::metric_timelevels = 2 CoordBase::domainsize = minmax CoordBase::spacing = numcells CoordBase::xmin = -36.0 CoordBase::ymin = -36.0 CoordBase::zmin = -36.0 CoordBase::xmax = 36.0 CoordBase::ymax = 36.0 CoordBase::zmax = 36.0 CoordBase::ncells_x = 12 CoordBase::ncells_y = 12 CoordBase::ncells_z = 12 CartGrid3D::type = coordbase CartGrid3D::avoid_origin = no NaNChecker::check_every = 524288 NaNChecker::action_if_found = terminate Carpet::max_refinement_levels = 7 CarpetRegrid::refinement_levels = 7 CarpetRegrid::refined_regions = "manual-coordinate-list" CarpetRegrid::smart_outer_boundaries = yes CarpetRegrid::coordinates = "[ [([-36,-36,-36]:[36,36,36]:[3,3,3])], [([-36,-36,-36]:[36,36,36]:[1.5,1.5,1.5])], [([-19.5,-19.5,-19.5]:[19.5,19.5,19.5]:[0.75,0.75,0.75])], [([-12,-9,-9]:[12,9,9]:[0.375,0.375,0.375])], [([-8.25,-4.125,-4.125]:[-1.875,4.125,4.125]:[0.1875,0.1875,0.1875]),([1.875,-4.125,-4.125]:[8.25,4.125,4.125]:[0.1875,0.1875,0.1875])], [([-6.375,-1.6875,-1.6875]:[-3.75,1.6875,1.6875]:[0.09375,0.09375,0.09375]), ([3.75,-1.6875,-1.6875]:[6.375,1.6875,1.6875]:[0.09375,0.09375,0.09375])] ]" Carpet::verbose = "no" Carpet::veryverbose = "no" BruiserSetBG::bh1_m = 1.0 BruiserSetBG::bh1_a = 0.5 BruiserSetBG::bh1_theta = 0.0 BruiserSetBG::bh1_phi = 1.57 BruiserSetBG::bh1_x = -5.00 BruiserSetBG::bh1_y = 0.0 BruiserSetBG::bh1_z = 0.0 BruiserSetBG::bh1_vx = 1.0e-33 BruiserSetBG::bh1_vy = 0.0 BruiserSetBG::bh1_vz = 0.0 BruiserSetBG::bh2_m = 1.0 BruiserSetBG::bh2_a = 0.5 BruiserSetBG::bh2_theta = 0.0 BruiserSetBG::bh2_phi = 0.0 BruiserSetBG::bh2_x = 5.00 BruiserSetBG::bh2_y = 0.0 BruiserSetBG::bh2_z = 0.0 BruiserSetBG::bh2_vx = 1.0e-33 BruiserSetBG::bh2_vy = 0.0 BruiserSetBG::bh2_vz = 0.0 BruiserSetBG::r_mask = 0.9 BruiserConstraints::skip_solver = "no" BruiserConstraints::use_fma = "no" BruiserConstraints::nlevels = 7 BruiserConstraints::nvcycle = 1 BruiserConstraints::preswp = 3 BruiserConstraints::bruiser_verbosity = 5 BruiserConstraints::sor_factor = 1.4 BruiserConstraints::cgtol = 1.0e-8 SpaceMask::use_mask = yes AHFinderDirect::find_every = 1 AHFinderDirect::geometry_interpolator_name = "Lagrange polynomial interpolation" AHFinderDirect::geometry_interpolator_pars = "order=4" AHFinderDirect::surface_interpolator_name = "Lagrange polynomial interpolation" AHFinderDirect::surface_interpolator_pars = "order=4" AHFinderDirect::N_horizons = 2 AHFinderDirect::origin_x [1] = -5.0 AHFinderDirect::initial_guess__coord_sphere__x_center [1] = -5.0 AHFinderDirect::initial_guess__coord_sphere__radius [1] = 2.0 AHFinderDirect::which_surface_to_store_info [1] = 0 AHFinderDirect::origin_x [2] = 5.0 AHFinderDirect::initial_guess__coord_sphere__x_center [2] = 5.0 AHFinderDirect::initial_guess__coord_sphere__radius [2] = 2.0 AHFinderDirect::which_surface_to_store_info [2] = 1 AHFinderDirect::set_mask_for_individual_horizon [2] = no TimerReport::output_all_timers = "yes" IOBasic::outInfo_every = 1 IOBasic::outInfo_reductions = "minimum maximum" IOBasic::outInfo_vars = " ADMBase::alp " IOScalar::outScalar_every = 1 IOScalar::outScalar_vars = " grid::coordinates ADMBase::metric ADMBase::curv " IOASCII::out2D_every = 1 IOASCII::out2D_vars = " BruiserConstraints::phi " IOHDF5::out_criterion = time IOHDF5::out_dt = 1.0 IOHDF5::out_vars = " ADMBase::metric ADMBase::curv BruiserSetBG::bruiser_mask BruiserConstraints::phi " BruiserConstraints::output_method = "IOHDF5"
_______________________________________________ Users mailing list [email protected] http://lists.einsteintoolkit.org/mailman/listinfo/users
