Miguel

Yes, Carpet prolongates with the same order in each direction. However, in
your case, prolongation in the z direction is exact and does not require
any ghost zones, since nothing needs to happen in the z direction. Carpet
should handle this correctly. Can you post a complete, simplified parameter
file to reproduce the problem?

-erik


On Wed, Feb 14, 2018 at 10:36 PM, Miguel Zilhão <
miguel.zilhao.nogue...@tecnico.ulisboa.pt> wrote:

> hi all,
>
> many thanks for the parameter file, Steve. it works, but as soon as i set
> Carpet::prolongation_order_space = 5, i get inconsistent grid structure
> type of errors:
>
> WARNING level 1 from host meurglysIII process 1
>    while executing schedule bin (none), routine (no thorn)::(no routine)
>    in thorn CarpetLib, file /home/mzilhao/dev/ET/Cactus/
> arrangements/Carpet/CarpetLib/src/dh.cc:161:
>    ->
> /home/mzilhao/dev/ET/Cactus/arrangements/Carpet/CarpetLib/src/dh.cc:813:
>     [ml=0 rl=1 c=1] The following grid structure consistency check failed:
>     Refinement prolongation: Send region must be contained in exterior
>     send <= obox.exterior
>
> WARNING level 0 from host meurglysIII process 0
>    while executing schedule bin (none), routine (no thorn)::(no routine)
>    in thorn CarpetLib, file /home/mzilhao/dev/ET/Cactus/
> arrangements/Carpet/CarpetLib/src/dh.cc:2118:
>    -> The grid structure is inconsistent.  It is impossible to continue.
> cactus_Lean_ET_master: /home/mzilhao/dev/ET/Cactus/
> arrangements/Carpet/Carpet/src/helpers.cc:275:
> int Carpet::Abort(const cGH*, int): Assertion `0' failed.
>
> so i guess it's as Ian said, that Carpet tries to prolongate with the same
> order in every direction?
> i find that in order for this to work i either have to decrease the
> prolongation to order 1, or put
> the boundary along the z direction back to a non-zero value. but i guess
> in this latter case i no
> longer have a truly 2D configuration, right?
>
> thanks,
> Miguel
>
> On 15/02/18 03:00, Steven R. Brandt wrote:
> > I have a parameter file which I have used fairly recently that does
> this. A very short running test
> > case is attached.
> >
> > --Steve
> >
> >
> > On 02/14/2018 09:21 AM, Miguel Zilhão wrote:
> >> hi Ian,
> >>
> >> many thanks for the parameter file. this allowed me to go a little
> further (i was missing
> >> CoordBase::boundary_shiftout_z_lower = 1 and
> CoordBase::boundary_shiftout_z_upper = 1).
> >> however, i'm still getting the following error:
> >>
> >> ERROR from host meurglysIII process 0
> >>     while executing schedule bin (none), routine (no thorn)::(no
> routine)
> >>     in thorn Carpet, file ./Cactus/arrangements/Carpet/
> Carpet/src/SetupGH.cc:2512:
> >>     -> There are not enough ghost zones for the desired spatial
> prolongation order on map 0,
> >> refinement level 0.  With a spatial prolongation order of 5, you need
> at least 3 ghost zones.
> >>
> >> i'm setting:
> >>
> >> Carpet::prolongation_order_space        = 5
> >> Carpet::prolongation_order_time         = 2
> >>
> >> driver::ghost_size_x                 = 3
> >> driver::ghost_size_y                 = 3
> >> driver::ghost_size_z                 = 0
> >>
> >> i'm guessing that in the example you provided things worked because you
> only had one grid? is there
> >> any way of doing this with more inner levels?
> >>
> >> thanks,
> >> Miguel
> >>
> >> On 14/02/18 22:25, ian.hin...@aei.mpg.de wrote:
> >>>
> >>>> On 13 Feb 2018, at 06:19, Miguel Zilhão <miguel.zilhao.nogueira@
> tecnico.ulisboa.pt
> >>>> <mailto:miguel.zilhao.nogue...@tecnico.ulisboa.pt>> wrote:
> >>>>
> >>>> hi Erik,
> >>>>
> >>>> thanks for your reply. i've tried to set the parameters as you
> described, but i'm getting a Carpet
> >>>> assertion failure:
> >>>>
> >>>> cactus_Lean_ET: Cactus/arrangements/Carpet/CarpetLib/src/gh.cc:61 <
> http://gh.cc:61/>: gh::gh(const
> >>>> std::vector<vect<int, 3> >&, centering, int, centering, const
> std::vector<std::vector<bbox<int,
> >>>> 3> >
> >>>>> &, const i2vect&): Assertion `all(box.shape() / box.stride() >=
> boundary_width[0] +
> >>>> boundary_width[1])' failed.
> >>>>
> >>>> here's how i'm specifying my grid:
> >>>>
> >>>> CoordBase::xmin                      = -48.00
> >>>> CoordBase::ymin                      = -48.00
> >>>> CoordBase::zmin                      =   0.00
> >>>> CoordBase::xmax                      = +48.00
> >>>> CoordBase::ymax                      = +48.00
> >>>> CoordBase::zmax                      =  +0.00
> >>>> CoordBase::dx                        =   2.00
> >>>> CoordBase::dy                        =   2.00
> >>>> CoordBase::dz                        =   2.00
> >>>>
> >>>> driver::ghost_size_x                 = 3
> >>>> driver::ghost_size_y                 = 3
> >>>> driver::ghost_size_z                 = 0
> >>>>
> >>>> CoordBase::boundary_size_x_lower     = 3
> >>>> CoordBase::boundary_size_y_lower     = 3
> >>>> CoordBase::boundary_size_z_lower     = 0
> >>>> CoordBase::boundary_size_x_upper     = 0
> >>>> CoordBase::boundary_size_y_upper     = 0
> >>>> CoordBase::boundary_size_z_upper     = 0
> >>>>
> >>>> CoordBase::boundary_shiftout_x_lower = 0
> >>>> CoordBase::boundary_shiftout_y_lower = 0
> >>>> CoordBase::boundary_shiftout_z_lower = 0
> >>>>
> >>>> am i missing something?
> >>> Hi Miguel,
> >>>
> >>> There is an example parameter file in Kranc, for a true 2D Laplace
> equation (i.e. it doesn't take
> >>> derivatives in the z direction):
> >>>
> >>> https://github.com/ianhinder/Kranc/blob/master/Examples/laplace.par
> >>>
> >>> I have not tried this recently, but it worked at one point.
> >>>
> >>> --
> >>> Ian Hinder
> >>> http://members.aei.mpg.de/ianhin
> >>>
> >> _______________________________________________
> >> Users mailing list
> >> Users@einsteintoolkit.org
> >> http://lists.einsteintoolkit.org/mailman/listinfo/users
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users@einsteintoolkit.org
> > http://lists.einsteintoolkit.org/mailman/listinfo/users
> >
> _______________________________________________
> Users mailing list
> Users@einsteintoolkit.org
> http://lists.einsteintoolkit.org/mailman/listinfo/users
>



-- 
Erik Schnetter <schnet...@cct.lsu.edu>
http://www.perimeterinstitute.ca/personal/eschnetter/
_______________________________________________
Users mailing list
Users@einsteintoolkit.org
http://lists.einsteintoolkit.org/mailman/listinfo/users

Reply via email to