Setting -isolate-styles=false is not recommended when using Spark components. Verify that your calls to IModule.load() are being passed a module factory as the fourth parameter.
-Darrell Loverin On Mon, Nov 11, 2013 at 3:15 AM, Devesh Mishra <[email protected]>wrote: > Hi, > > I have lots of mxml modules (which is a combination of mxml & spark > controls) in my application and the way i am opening these mxml modules is > common in a popup window. > > It's very strange to see that i am getting this error with only one > module. This issue is not related to a specific component. > > As it shows in error stack, i have removed panel from module, then it > start throwing same error with some other components. > > -----Original Message----- > From: Alex Harui [mailto:[email protected]] > Sent: 11 November 2013 11:30 > To: Devesh Mishra; [email protected] > Subject: Re: One of the parameters is invalid while loading a module > > Some folks on the forum said it worked for them. > > This error stack usually means an invalid value (usually NaN) is being > passed to drawRect. But a breakpoint on PanelAccImpl and see if you can > figure out why it is being passed a bad value. > > -Alex > > On 11/10/13 8:57 PM, "Devesh Mishra" <[email protected]> wrote: > > >Hi, > > > >I have tried that suggestion which is given in forum and it's working for > >me. I am getting below error stack. > > > >Just want to validate whether given suggestion is valid or not. > > > >ArgumentError: Error #2004: One of the parameters is invalid. > > at flash.display::Graphics/drawRect() > > at > >spark.accessibility::PanelAccImpl/eventHandler()[E:\dev\4.x\frameworks\pro > >jects\spark\src\spark\accessibility\PanelAccImpl.as:361] > > at flash.events::EventDispatcher/dispatchEventFunction() > > at flash.events::EventDispatcher/dispatchEvent() > > at > >mx.core::UIComponent/dispatchEvent()[E:\dev\4.x\frameworks\projects\framew > >ork\src\mx\core\UIComponent.as:12528] > > at > >mx.core::UIComponent/dispatchResizeEvent()[E:\dev\4.x\frameworks\projects\ > >framework\src\mx\core\UIComponent.as:9844] > > at > >mx.core::UIComponent/setActualSize()[E:\dev\4.x\frameworks\projects\framew > >ork\src\mx\core\UIComponent.as:9358] > > at > >mx.containers.utilityClasses::Flex$/flexChildHeightsProportionally()[E:\de > >v\4.x\frameworks\projects\framework\src\mx\containers\utilityClasses\Flex. > >as:250] > > at > >mx.containers.utilityClasses::BoxLayout/updateDisplayList()[E:\dev\4.x\fra > >meworks\projects\framework\src\mx\containers\utilityClasses\BoxLayout.as:2 > >61] > > at > >mx.containers::Box/updateDisplayList()[E:\dev\4.x\frameworks\projects\fram > >ework\src\mx\containers\Box.as:413] > > at > >mx.core::UIComponent/validateDisplayList()[E:\dev\4.x\frameworks\projects\ > >framework\src\mx\core\UIComponent.as:8709] > > at > >mx.core::Container/validateDisplayList()[E:\dev\4.x\frameworks\projects\fr > >amework\src\mx\core\Container.as:3296] > > at > >mx.managers::LayoutManager/validateClient()[E:\dev\4.x\frameworks\projects > >\framework\src\mx\managers\LayoutManager.as:932] > > at > >mx.core::UIComponent/validateNow()[E:\dev\4.x\frameworks\projects\framewor > >k\src\mx\core\UIComponent.as:7792] > > at > >mx.managers::PopUpManagerImpl/centerPopUp()[E:\dev\4.x\frameworks\projects > >\framework\src\mx\managers\PopUpManagerImpl.as:489] > > at > >mx.managers::PopUpManager$/centerPopUp()[E:\dev\4.x\frameworks\projects\fr > >amework\src\mx\managers\PopUpManager.as:213] > > at flash.events::EventDispatcher/dispatchEventFunction() > > at flash.events::EventDispatcher/dispatchEvent() > > at > >mx.core::UIComponent/dispatchEvent()[E:\dev\4.x\frameworks\projects\framew > >ork\src\mx\core\UIComponent.as:12528] > > at > >mx.modules::ModuleLoader/moduleReadyHandler()[E:\dev\4.x\frameworks\projec > >ts\framework\src\mx\modules\ModuleLoader.as:462] > > at flash.events::EventDispatcher/dispatchEventFunction() > > at flash.events::EventDispatcher/dispatchEvent() > > at > >ModuleInfoProxy/moduleEventHandler()[E:\dev\4.x\frameworks\projects\framew > >ork\src\mx\modules\ModuleManager.as:1168] > > at flash.events::EventDispatcher/dispatchEventFunction() > > at flash.events::EventDispatcher/dispatchEvent() > > at > >ModuleInfo/readyHandler()[E:\dev\4.x\frameworks\projects\framework\src\mx\ > >modules\ModuleManager.as:812] > > at flash.events::EventDispatcher/dispatchEventFunction() > > at flash.events::EventDispatcher/dispatchEvent() > > at > >mx.core::FlexModuleFactory/update()[E:\dev\4.x\frameworks\projects\framewo > >rk\src\mx\core\FlexModuleFactory.as:433] > > at > >mx.core::FlexModuleFactory/docFrameHandler()[E:\dev\4.x\frameworks\project > >s\framework\src\mx\core\FlexModuleFactory.as:582] > > at > >mx.core::FlexModuleFactory/docFrameListener()[E:\dev\4.x\frameworks\projec > >ts\framework\src\mx\core\FlexModuleFactory.as:126] > > > >-----Original Message----- > >From: Alex Harui [mailto:[email protected]] > >Sent: 08 November 2013 22:49 > >To: [email protected] > >Subject: Re: One of the parameters is invalid while loading a module > > > >What is the error message and call stack? Did you try the workaround > >suggested in the forum thread? > > > >On 11/8/13 1:26 AM, "Devesh Mishra" <[email protected]> wrote: > > > >>Hi, > >>I am facing the same issue which has been reported in the given URL > >>(http://forums.adobe.com/message/2783233) > >>In this post, someone mentioned that this issue is coming because of > >>different implementation of StyleManager in Flex 3 & Flex 4. > >>Need confirmation for the same. > >>MASTEK LTD. > >>In the US, we're called MAJESCOMASTEK > >> > >>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >>~ > >>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >>Opinions expressed in this e-mail are those of the individual and not > >>that of Mastek Limited, unless specifically indicated to that effect. > >>Mastek Limited does not accept any responsibility or liability for it. > >>This e-mail and attachments (if any) transmitted with it are confidential > >>and/or privileged and solely for the use of the intended person or entity > >>to which it is addressed. Any review, re-transmission, dissemination or > >>other use of or taking of any action in reliance upon this information by > >>persons or entities other than the intended recipient is prohibited. This > >>e-mail and its attachments have been scanned for the presence of computer > >>viruses. It is the responsibility of the recipient to run the virus check > >>on e-mails and attachments before opening them. If you have received this > >>e-mail in error, kindly delete this e-mail from desktop and server. > >>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >>~ > >>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > >MASTEK LTD. > >In the US, we're called MAJESCOMASTEK > > > >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >Opinions expressed in this e-mail are those of the individual and not > >that of Mastek Limited, unless specifically indicated to that effect. > >Mastek Limited does not accept any responsibility or liability for it. > >This e-mail and attachments (if any) transmitted with it are confidential > >and/or privileged and solely for the use of the intended person or entity > >to which it is addressed. Any review, re-transmission, dissemination or > >other use of or taking of any action in reliance upon this information by > >persons or entities other than the intended recipient is prohibited. This > >e-mail and its attachments have been scanned for the presence of computer > >viruses. It is the responsibility of the recipient to run the virus check > >on e-mails and attachments before opening them. If you have received this > >e-mail in error, kindly delete this e-mail from desktop and server. > >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > MASTEK LTD. > In the US, we're called MAJESCOMASTEK > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Opinions expressed in this e-mail are those of the individual and not that > of Mastek Limited, unless specifically indicated to that effect. Mastek > Limited does not accept any responsibility or liability for it. This e-mail > and attachments (if any) transmitted with it are confidential and/or > privileged and solely for the use of the intended person or entity to which > it is addressed. Any review, re-transmission, dissemination or other use of > or taking of any action in reliance upon this information by persons or > entities other than the intended recipient is prohibited. This e-mail and > its attachments have been scanned for the presence of computer viruses. It > is the responsibility of the recipient to run the virus check on e-mails > and attachments before opening them. If you have received this e-mail in > error, kindly delete this e-mail from desktop and server. > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >
