Hi Juan Carlos,
I think the “solution” suggested by me was a little bit too elegant, in fact it
is buggy and that’s why you experience segfaults… Reminds of an Einstein quote:
Everything should be made as simple as possible, but not simpler.
The problem is as follows: variables in Gecode belong to just one space and
they are deleted when the space is deleted. However in the constrain() function
a new propagator is created with both variables from the *this space as well as
from the space for the so-far best solution b. Now what can happen is that b
might already be deleted while *this is still alive: hence the access to
variables which are already did and kaboom: segfault!
The problem is easy to fix, though: when the constrain() function is called you
create new variables, one for each variable from b, but now in *this! The
variables in b must be assigned, so creating new variables in *this must happen
with the variables assigned to the value of the respective variable in b.
The code should look this, roughly:
IntVarArgs bo(*this, mycpSolver.objectives.size(),
Int::Limits::min, Int::Limits::max);
for (int i=0; i< mycpSolver.objectives.size(), i++)
rel(*this, bo[i], IRT_EQ, mycpSolver.objectives[i].val());
rel(*this, objectives, IRT_LE, bo);
Sorry for not thinking about this in the first place. I’ll add a tip and a
warning in MPG.
Cheers
Christian
--
Christian Schulte, <http://www.gecode.org/~schulte> www.gecode.org/~schulte
Professor of Computer Science, KTH, <mailto:cschu...@kth.se> cschu...@kth.se
Expert Researcher, SICS, <mailto:cschu...@sics.se> cschu...@sics.se
From: Juan Carlos Hernandez [mailto:jchernandez.mad...@gmail.com]
Sent: Monday, February 1, 2016 06:25 PM
To: Christian Schulte <cschu...@kth.se>
Cc: Alexander Schiendorfer <alexander.schiendor...@informatik.uni-augsburg.de>;
users@gecode.org
Subject: Re: [gecode-users] users Digest, Vol 124, Issue 6
Dear Alex and Christian,
thanks a lot! A very elegant solution - it works well, but I am now battling
with two problems
1. I get a segmentation fault when I try to run it in parallel mode (say, using
8 threads). The error happens irregularly, but more often when I increase the
thread count. Here is what my constrain function looks like for a maximization
problem
virtual void constrain(const Space& _b){
const cpSolver& mycpSolver = static_cast<const cpSolver&>(_b);
rel(*this, objectives, IRT_GR, mycpSolver.objectives);
}
Since this does not really look like the other examples in the Gecode manual, I
guess that it is not correct. But I was unable to come up with any other
solution that rel would accept (that is, for which there is a matching version
of rel).
2. Ideally, I would like to have more than two objectives and have the search
to first try to maximize the first objective, then the second, etc. But I do
not manage, not matter which variable selection rule I use. Typically, I get a
little advancement in the first objective (say, it goes from 0 to 1, and
perhaps to two), and then the search makes progress on the third or fourth
objective in order.
Thanks,
JC
2016-01-29 12:15 GMT+01:00 Christian Schulte <cschu...@kth.se
<mailto:cschu...@kth.se> >:
Alex is spot on here: but let me expand a little.
You might have used the cost() member function for B&B. However the cost()
member function is just implemented in terms of the constrain() member
function. So what I would do is the following:
- Have a integer variable array cost containing the two cost variables you
have in mind.
- implement a constrain(const Space& _b) member function: _b refers to the
so-far best solution. Cast this to your script type, say b. Then this just
posts
rel(*this, cost, IRT_LQ, b.cost);
This enforces that this->cost is lexicographically smaller then the so
far best cost b.cost.
That's it. More on the constrain() function you can find in Chapter 2 of
MPG.
Cheers
Christian
--
Christian Schulte, www.gecode.org/~schulte <http://www.gecode.org/~schulte>
Professor of Computer Science, KTH, cschu...@kth.se <mailto:cschu...@kth.se>
Expert Researcher, SICS, cschu...@sics.se <mailto:cschu...@sics.se>
-----Original Message-----
From: users-boun...@gecode.org <mailto:users-boun...@gecode.org>
[mailto:users-boun...@gecode.org <mailto:users-boun...@gecode.org> ] On Behalf
Of Alexander Schiendorfer
Sent: Friday, January 29, 2016 12:06 PM
To: users@gecode.org <mailto:users@gecode.org>
Subject: Re: [gecode-users] users Digest, Vol 124, Issue 6
Hi Juan,
it seems to me that you're searching for lexicographic branch-and-bound.
There is a global constraint lex_lesseq that you might want to consider for
posting in the constrain method of a Space.
Cheers,
Alex
On 29.01.2016 12:00, users-requ...@gecode.org <mailto:users-requ...@gecode.org>
wrote:
> Send users mailing list submissions to
> users@gecode.org <mailto:users@gecode.org>
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://www.gecode.org/cgi-bin/mailman/listinfo/users
> or, via email, send a message with subject or body 'help' to
> users-requ...@gecode.org <mailto:users-requ...@gecode.org>
>
> You can reach the person managing the list at
> users-ow...@gecode.org <mailto:users-ow...@gecode.org>
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of users digest..."
>
>
> Today's Topics:
>
> 1. Best way to implement multi-criterion optimization in Gecode?
> (Juan Carlos Hernandez)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 28 Jan 2016 12:30:54 +0100
> From: Juan Carlos Hernandez <jchernandez.mad...@gmail.com
> <mailto:jchernandez.mad...@gmail.com> >
> To: users@gecode.org <mailto:users@gecode.org>
> Subject: [gecode-users] Best way to implement multi-criterion
> optimization in Gecode?
> Message-ID:
> <CAFd=f3eau+xpqjo02kpt9swibpjxkifw-f2so-4me+x4kv7...@mail.gmail.com
> <mailto:f3eau%2bxpqjo02kpt9swibpjxkifw-f2so-4me%2bx4kv7...@mail.gmail.com> >
> Content-Type: text/plain; charset="utf-8"
>
> Hi everyone,
>
>
> I am trying to use Gecode to solve a multi-criterion problem
>
>
> minimize (F1(x,z), F2(x,z) )
>
> subject to constraints on x,z
>
>
> The objectives are ordered in order of importance, so I would like to
> first solve the problem P1
>
>
> minimize F1(x,z)
>
> subject to original constraints on x,z
>
>
> and then consider the modified problem P2
>
>
> minimize F2(x,z)
>
> subject to original constraints on x,z
>
> F1(x,z) = F1opt
>
>
> where F1opt is the optimal value of P1.
>
>
> What is the most efficient way to implement this in Gecode?
>
>
>
> I am now doing two completely separate searches, in the sense that I
> create a new Space and run BAB on it for each of the problems. I am
> sure that this cannot be the most efficient way of dealing with the
> problem, but am unable to figure out how to do it "the right way".
> Essentially, when solving P2 I should be able to make use of the work done
while solving P1...
>
>
> Any feedback is very much appreciated!
>
>
> Thanks,
>
> JC
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> <http://www.gecode.org/pipermail/users/attachments/20160128/06e6ff75/a
> ttachment-0001.html>
>
> ------------------------------
>
> _______________________________________________
> Gecode users mailing list
> users@gecode.org <mailto:users@gecode.org>
> https://www.gecode.org/mailman/listinfo/gecode-users
>
>
> End of users Digest, Vol 124, Issue 6
> *************************************
--
Alexander Schiendorfer, M.Sc.
Institute for Software & Systems Engineering Raum 3043, Gebäude N
Universität Augsburg
Web:
http://www.informatik.uni-augsburg.de/lehrstuehle/swt/se/staff/aschiendorfer
/
Tel.: +49 (821) 598 - 2196 <tel:%2B49%20%28821%29%20598%20-%202196>
E-Mail: alexander.schiendor...@informatik.uni-augsburg.de
<mailto:alexander.schiendor...@informatik.uni-augsburg.de>
_______________________________________________
Gecode users mailing list
users@gecode.org <mailto:users@gecode.org>
https://www.gecode.org/mailman/listinfo/gecode-users
_______________________________________________
Gecode users mailing list
users@gecode.org <mailto:users@gecode.org>
https://www.gecode.org/mailman/listinfo/gecode-users
_______________________________________________
Gecode users mailing list
users@gecode.org
https://www.gecode.org/mailman/listinfo/gecode-users
