I sent this response yesterday, but it doesn't seem to have made it
through to the list... apologies if it ends up duplicated.
Thanks for confirming that this is the problem, and that the workaround
works. I'll see about checking if this still happens in the latest
version and filing an enhancement request some time.
Expected behaviour may need a bit more thinking through though. e.g.
whether a search for "9876.50" should find a cell with a value of
9876.499 if it's displayed to 2 decimal places as 9876.50. I'm starting
to think perhaps the cell's display precision shouldn't matter, but
perhaps the search term precision should, e.g. a search for "9876.5"
would find cells with a value between 9876.45 and 9876.55, whereas a
search for "9876.50" would find cells with a value between 9876.495 and
9876.505...
Mark.
WEDLOCO wrote:
Ah Mark - you have solved it!
I was looking for an amount of 13.50 and entered 13.50 (which I thought was
logical) - search not found.
Now I have tried entering 13.5 and it finds it! Must remember not to add the 0.
"If you search for "9876.50", it DOES NOT find anything - which is probably not
what you'd expect
(I'd have expected it to find that cell containing 9876.5)”
Absolutely - so I am not a complete Numpty! (a Scottish word).
Thank you so much, to Tom and all others who have tried to help.
Kind regards,
Evie.
On 20 Dec 2014, at 18:57, Mark Bourne <[email protected]>
wrote:
I'm not sure I understand what you mean by "the full amount/value"? Are you
able to give an example of what you're entering in Find, and the values in some cells in
your sheet which you'd expect that to find?
A more concrete example showing what I was trying to describe... If you have a
sheet displaying the following values:
9876.00
9876.50
9876.54
The actual values of the cells are:
9876
9876.5
9876.54
(they're just displayed with two decimal places because of the formatting
applied to the cells)
If you search for "9876.54", it finds the cell containing 9876.54; so far so
good.
If you search for "9876.5", it finds the cell containing 9876.5, and also the
cell containing 9876.54; also fine, but probably not very helpful in your case.
If you search for "9876.50", it DOES NOT find anything - which is probably not
what you'd expect (I'd have expected it to find that cell containing 9876.5).
To find cells displaying "9876.50" but not other values (such as 9876.54), it seems you need to use the Find
& Replace dialog, search for "9876.5", and select the "Entire cells" option. This may present other
problems, for example it wouldn't find a value 9876.501, even though that would be displayed as "9876.50".
Mark.
WEDLOCO wrote:
Hi Mark
What I’m entering in Find is the full amount/value. The amount of 1234.12 is
just to show the format I am using
Kind regards,
Evie.
[email protected]
www.wedloco.co.uk
DIY Invitations & Stationery
0131 478 9175
On 20 Dec 2014, at 18:11, Mark Bourne <[email protected]>
wrote:
WEDLOCO wrote:
Thanks Tom for your quick response and suggestion - and also all others who
have contributed.
Downloaded the Still version 4.2.8 but same thing is happening. Worked 1st time
I entered a value in find
and then when I changed the amount "Search key not found". I entered different
amounts from different cells to test and it can find some values but not others???
They are all formatted as numbers e.g.: 1234.12. No formulas in cells.
These are bank statements downloaded as .cvs files then changed to .ods files
in Libra to check against receipts.
Cheers.
Evie.
Briefly experimenting with this, it seems that if there is a value of 1234.1 in
a cell, it is found when searching for 1234.1 but not when searching for
1234.10 - even if it is formatted to display two decimal places. Could that be
what you're seeing?
Additionally, a cell containing 1234.12 is found by a search for either 1234.12 or 1234.1, which makes
it more difficult to find 1234.10 but not 1234.12. It is possible though, by using Edit > Find and
Replace, entering "1234.1" as the search term, and selecting the "Entire cells"
option; that will then find a cell containing 1234.1 but not 1234.12.
This does seem potentially confusing. If this is the problem you're seeing, it may be
worth filing an enhancement request athttps://www.libreoffice.org/get-help/bug/. After
filling in the details but before submitting, check the list of "Related bug
reports". If any of those describe the same problem, it's better to add information
there instead of submitting a new report.
Mark.
--
To unsubscribe e-mail to: [email protected]
Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette
List archive: http://listarchives.libreoffice.org/global/users/
All messages sent to this list will be publicly archived and cannot be deleted
