Thanks Sir as you are helping me...........
as you told me i have made these changes and in DOS it is showing as you told me
"""
Pinging nbk [127.0.0.1] with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Listen 80
ServerName localhost:80
Changed conf-file 80 with 88.
TCP 0.0.0.0:88 0.0.0.0:0 LISTENING
After that opened the Internet Explorer and wrote in the address field
localhost:88 or 127.0.0.1:88"""
but still when i open the localhost:88 or 127.0.0:88 the browser keeps on
searching but does'nt show anything...
you asked about 192.168.0.1 , yes this is the ip address of
server....from-where i am receiving internet....
sir i want to tell you some settings.
This network uses an ISA server and i am using ISA Client..
In my local area connection properties there are following things installed:
Client for microsoft Networks
File and Printer Sharing for Microsoft Networks
NWLink NetBios
NWLink IPX/SPX/NetBIOS Compatible Transport Protocol
Internet Protocol (TCP/IP)
in my tcp/ip settings i have entered the following things...
IP address: 192.168.0.101
Subnet mask: 255.255.255.0
Default gateway is empty
Preferred DNS server is empty
Alternate DNS server is empty
Please help sir, you are the only hope for me until now...
----- Original Message -----
From: Chakan
To: [email protected]
Sent: Monday, August 13, 2007 4:16 PM
Subject: RE: [EMAIL PROTECTED] Please Help
Hello Shakeel,
I think the following things could be the problem:
TCP 127.0.0.1:80 127.0.0.1:1078 CLOSE_WAIT
TCP 127.0.0.1:80 127.0.0.1:1079 CLOSE_WAIT
TCP 192.168.0.101:80 192.168.0.1:27066 ESTABLISHED
Is it correct your IP is 192.168.0.101 and what is the IP 192.168.0.1, a
server or router?
Something established a connection to the IP 192.168.0.1 with the port 80.
Please try following things:
- Open a dos box and send a PING to localhost. It should looks like:
C:\>ping localhost
Pinging nbk [127.0.0.1] with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
- Try another things: Change the listening port from your httpd.conf. You
should see in your httpd.conf something like this:
Listen 80
ServerName localhost:80
Change in your conf-file where you see something with 80 for example to 88.
Then open again a dos box and send a netstat -an. You should see this:
TCP 0.0.0.0:88 0.0.0.0:0 LISTENING
After that open the Internet Explorer and write in the address field
localhost:88 or 127.0.0.1:88
I hope it works. And before you change something in your httpd.conf file you
should create a backup.
Kind regards,
Ch
------------------------------------------------------------------------------
From: Shakeel Ahmad [mailto:[EMAIL PROTECTED]
Sent: 13 August 2007 07:46
To: [email protected]
Subject: [EMAIL PROTECTED] Please Help
-------------------------------------------------------------------------------------------
With Apache Running I find the following by using (netstat -an)
-------------------------------------------------------------------------------------------
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:3306 0.0.0.0:0 LISTENING
TCP 127.0.0.1:80 127.0.0.1:1078 CLOSE_WAIT
TCP 127.0.0.1:80 127.0.0.1:1079 CLOSE_WAIT
TCP 127.0.0.1:1045 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1078 127.0.0.1:80 FIN_WAIT_2
TCP 127.0.0.1:1079 127.0.0.1:80 FIN_WAIT_2
TCP 192.168.0.101:80 192.168.0.1:27066 ESTABLISHED
TCP 192.168.0.101:139 0.0.0.0:0 LISTENING
TCP 192.168.0.101:1046 192.168.0.1:1745 ESTABLISHED
TCP 192.168.0.101:1076 192.168.0.1:8080 FIN_WAIT_2
TCP 192.168.0.101:1081 192.168.0.1:8080 TIME_WAIT
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:4500 *:*
UDP 0.0.0.0:23281 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1026 *:*
UDP 127.0.0.1:1028 *:*
UDP 127.0.0.1:1030 *:*
UDP 127.0.0.1:1032 *:*
UDP 127.0.0.1:1034 *:*
UDP 127.0.0.1:1036 *:*
UDP 127.0.0.1:1040 *:*
UDP 127.0.0.1:1044 *:*
UDP 127.0.0.1:1050 *:*
UDP 127.0.0.1:1052 *:*
UDP 127.0.0.1:1061 *:*
UDP 127.0.0.1:1064 *:*
UDP 127.0.0.1:1083 *:*
UDP 127.0.0.1:1900 *:*
UDP 192.168.0.101:123 *:*
UDP 192.168.0.101:137 *:*
UDP 192.168.0.101:138 *:*
UDP 192.168.0.101:1900 *:*
-------------------------------------------------------------------------------------------------------------
With the Apache closed/shutdown I find the following by using (netstat -an)
-------------------------------------------------------------------------------------------------------------
Proto Local Address Foreign Address State
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:3306 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1045 0.0.0.0:0 LISTENING
TCP 192.168.0.101:139 0.0.0.0:0 LISTENING
TCP 192.168.0.101:1046 192.168.0.1:1745 ESTABLISHED
TCP 192.168.0.101:1086 192.168.0.1:1745 ESTABLISHED
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:4500 *:*
UDP 0.0.0.0:23281 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1026 *:*
UDP 127.0.0.1:1028 *:*
UDP 127.0.0.1:1032 *:*
UDP 127.0.0.1:1034 *:*
UDP 127.0.0.1:1036 *:*
UDP 127.0.0.1:1044 *:*
UDP 127.0.0.1:1050 *:*
UDP 127.0.0.1:1052 *:*
UDP 127.0.0.1:1061 *:*
UDP 127.0.0.1:1064 *:*
UDP 127.0.0.1:1085 *:*
UDP 127.0.0.1:1090 *:*
UDP 127.0.0.1:1900 *:*
UDP 192.168.0.101:123 *:*
UDP 192.168.0.101:137 *:*
UDP 192.168.0.101:138 *:*
UDP 192.168.0.101:1900 *:*
--------------------------------------------------
In the error.log i find the followings:
--------------------------------------------------
[Mon Aug 13 08:57:30 2007] [notice] Apache/2.0.59 (Win32) configured --
resuming normal operations
[Mon Aug 13 08:57:30 2007] [notice] Server built: Jul 27 2006 15:55:03
[Mon Aug 13 08:57:30 2007] [notice] Parent: Created child process 1352
[Mon Aug 13 08:57:30 2007] [notice] Disabled use of AcceptEx() WinSock2 API
[Mon Aug 13 08:57:30 2007] [notice] Child 1352: Child process is running
[Mon Aug 13 08:57:30 2007] [notice] Child 1352: Acquired the start mutex.
[Mon Aug 13 08:57:30 2007] [notice] Child 1352: Starting 250 worker threads.
[Mon Aug 13 08:57:30 2007] [notice] Child 1352: Listening on port 80.
---------------------------------------------------------------------------------------------------------------------
But still when i try to open http://localhost or http://127.0.0.1 it
continuously searches but does'nt show any page or error.............
What is the problem now?
please help
---
Shakeel
----- Original Message -----
From: Chakan
To: [email protected]
Sent: Sunday, August 12, 2007 7:49 PM
Subject: RE: [EMAIL PROTECTED] Problem
Hello Shakeel,
it looks like that another software use Port 80.
Do the following steps please:
1. Stop Apache
2. Go to in the dos box (cmd)
3. write netstat -an
4. Check if Port 80 active (you should see something like this:
C:\>netstat -an
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING
These steps are for Windows XP / Apache.
Kind regards,
Ch
----------------------------------------------------------------------------
From: Shakeel Ahmad [mailto:[EMAIL PROTECTED]
Sent: 12 August 2007 11:55
To: [email protected]
Subject: [EMAIL PROTECTED] Problem
I am using internet through LAN. I have installed Apache server 2.0.59.
After installation when i started the service, it was successfully started.
but when i try to open http://localhost it does'nt open it.
the msg in errorlog file is:
"[Sun Aug 12 14:49:27 2007] [error] (OS 10022)An invalid argument was
supplied. : Child 896: Encountered too many errors accepting client
connections. Possible causes: dynamic address renewal, or incompatible VPN or
firewall software. Try using the Win32DisableAcceptEx directive."
Now the server shows that it is running but http://localhost or
http://127.0.0.1 is not working in my browser. i have disabled windows
firewall, and my NOD32 Antivirus but it is still not working.
if i try to run the apache server through "DOS" it gives the following
error.
"(OS 10048)Only one usage of each socket address (protocol/network
address/port) is normally permitted. : make_sock: could not bind to address
0.0.0.0:80 no listening sockets available, shutting down
Unable to open logs"
What should i do now..
please help
Shakeel Ahmad.
