Turn DHCP back on, then you will have an IP address to which you can forward traffic.
On Sun, Nov 11, 2018, 09:02 georg chambert <[email protected] wrote: > Hi again, > back to the drawing board and this trouble telia router, > > It seems that the telia router (connecting to ext network) does not serv > my > server with an IP address > the setup in the router wants me to fill in the ipv4 address that it > should > have DHCP served my server with..... > > when Im in the WAN advanced menu Im trying to fill in the UPnP variant for > port forwarding (whatever UPnP stands > for and what it does in this context....), but guess that im not to fill > in > for DynDNS. > ( the record for forwarding though has the ETHERNET address !! which I > think > should suffice more than enough but not) > > so still stuck, but possibly on a higher "understanding" level > > ----- Original Message ----- > From: "Freek de Kruijf" <[email protected]> > To: <[email protected]> > Sent: Wednesday, October 31, 2018 2:37 PM > Subject: Re: [users@httpd] invisible server > > > > Op woensdag 31 oktober 2018 12:48:42 CET schreef > [email protected]: > >> Hi again, didnt work to turn DHCP off, just rendered the PC/server > >> without > >> IP address (ie not even the local net) > > > > Right. > > > >> looking at WAN services, I get the following fields to fill (for "+ Add > >> new > >> IPv4 port mapping" ): > >> > >> IPv4 Port forwarding table > >> > >> Name Protocol WAN port LAN port Destination IP Destination > > MAC > >> > >> > >> > >> so the "Destination" in this, would that actually be the PC/server IP > >> (which > >> I then guess I have to set manually in the PC ) > > > > Your PC/Server normally gets the same IP address from DHCP when it > > restarts, > > so you can use that address as Destination. > > For a web server you need to forward the external port 80 to the > internal > > port > > 80 of your PC/Server. In case you use https you also need to forward 433 > > to > > 433. > > > > -- > > fr.gr. > > > > Freek de Kruijf > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [email protected] > > For additional commands, e-mail: [email protected] > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > >
