and read
http://srd.yahoo.com/goo/linux+ipv6/1/*http://www.bieringer.de/linux/IPv6/IP
v6-HOWTO/IPv6-HOWTO.html
-bats
----- Original Message -----
From: "Ryan Sweat" <[EMAIL PROTECTED]>
To: "Juan Fco Rodriguez Hervella" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, April 06, 2001 6:45 AM
Subject: Re: tunnel 6to4
> load the kernel module 'insmod ipv6'
>
> you may be required to compile it from kernel sources.
>
> ----- Original Message -----
> From: "Juan Fco Rodriguez Hervella" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, April 06, 2001 6:35 AM
> Subject: Re: tunnel 6to4
>
>
> Hi Robert:
>
> I am trying your solution, but when I run:
>
> root@alacran:~# ifconfig sit0 up
> sit0: unknown interface: No existe tal dispositivo
> (dont exists such device)
>
> Do I need to configure any kernel parameter to make
> available the sit interface ?
>
>
> Robert Wachinger escribió:
> >
> > Hi,
> >
> > Juan Fco Rodriguez Hervella wrote:
> >
> > > Can someone briefly explain me how to configure a 6to4 tunnel with
linux
> >
> > 6to4 are those 2002:<IPv4-Address of Gateway>:...-Adresses, some sort of
> > automatic tunnel between V6-networks ...
> >
> > I would do it this way:
> >
> > ifconfig sit0 up
> > ifconfig sit0 add <own 6to4-address>/16
> >
> > then I have an entry in my routing table like this:
> > 2002::/16 :: UA 256 0 0 sit0
> >
> > and everything else does the sit-driver ...
> >
> > Of course, if your sit-driver supports 6to4 (else you
> > would have to set up a normal configured tunnel ...)
> >
> > --
> > Regards, Robert Wachinger
> > Siemens ICM N MC MI E3
>
> --
> *********************************
> Juan F. Rodriguez Hervella
> Universidad Carlos III de Madrid
> ********************************
>
> ---------------------------------------------------------------------
> The IPv6 Users Mailing List
> Unsubscribe by sending "unsubscribe users" to [EMAIL PROTECTED]
>
---------------------------------------------------------------------
The IPv6 Users Mailing List
Unsubscribe by sending "unsubscribe users" to [EMAIL PROTECTED]
