Hello, Running 2.6.11 kernel. I set up a tunnel with the following commands:
ip tunnel add tun6to4 mode sit ttl 255 remote any local 140.175.165.63
ip link set dev tun6to4 up
ip -6 addr add 2002:8caf:a53f::1/16 dev tun6to4
This all works fine, but I get the following output from the "ifconfig
tun6to4" command:
tun6to4 Link encap:IPv6-in-IPv4
inet6 addr: 2002:8caf:a53f::1/16 Scope:Global
inet6 addr: ::140.175.165.63/128 Scope:Compat
UP RUNNING NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Can anyone explain to me what the function of the "Scope:Compat” is in the
above configuration and how I can use it to my benefit?
Thanks,
Phil Bellino
============================
Phil Bellino
MRV Communications, Inc.
Boston Product Division
295 Foster St.
Littleton,MA 01460
Tel: (978)952-4807
Email: [EMAIL PROTECTED]
============================
<<application/ms-tnef>>
