hi antonio
On Tue, Jun 10, 2008 at 4:32 AM, MARTINEZ Antonio
<[EMAIL PROTECTED]> wrote:
> Hi Stefan,
>
> Thanks for doing that testing.
>
> I have done now two different tests with a scaled down tree (140 Nodes
> with about 15 string of 15 bytes each)
> My server is a SunBlade 1500 with 2G.
>
> - If I build the tree and then save it, it takes about 40 seconds to
> save and exit the transaction.
>
> - However, if I just create one node and then add all other nodes as
> children of this one (flat storage), then it takes 3 seconds to save and
> exit the transaction.
>
> In the tree configuration, most of the nodes are at the deepest level
> (there are 10 levels in my case)
i modified my test accordingly. the 1st run adds ~10k child nodes to
a single parent ('flat'), the 2nd run creates a 8-level deep tree with
3 sibling child nodes at every but the leaf node (again ~10k nodes, 'deep').
the changes are comitted in a UserTransaction. i get nearly
identical results for both runs (commit takes ~7 seconds).
i used derby bundle db pm.
are you perhaps using a custom access mananger?
if you can provide a simple and complete test case i'll further investigate
your problem...
cheers
stefan
>
>
> I do not understand what is going on
>
> Thanks,
> Antonio
>
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On Behalf Of Stefan Guggisberg
> Sent: Monday, June 09, 2008 8:50 AM
> To: [email protected]
> Subject: Re: After session.save() takes 15 minutes for 6K nodes
>
> hi antonio
>
> On Mon, Jun 9, 2008 at 5:36 PM, MARTINEZ Antonio
> <[EMAIL PROTECTED]> wrote:
>> Hello,
>>
>> I'm using JackRabbit 1.4.4 with MySql bundle. The string are very
>> small, I would say 10 bytes average and some strings are 30 bytes. So
>> I'm not sure DataStore would be of any benefit.
>>
>> Is there something else that can be done to improve the saving time ?
>> Did anybody else have a similar issue?
>
> i ran a quick test on my local machine (2 ghz macbook pro) with mysql
> 5.0 running on the same machine and using bundle mysql pm;
>
> adding 6k child nodes with 15 string properties of 100 chars each takes
> ~2 seconds, saving them takes ~44 seconds. i ran jackrabbit
> strand-alone, i.e. w/o tx.
>
> maybe you're experiencing a high network latency?
>
> cheers
> stefan
>
>>
>> Many thanks,
>> Antonio
>>
>>
>>
>> -----Original Message-----
>> From: Alexander Klimetschek [mailto:[EMAIL PROTECTED]
>> Sent: Sunday, June 08, 2008 11:00 PM
>> To: [email protected]
>> Subject: Re: After session.save() takes 15 minutes for 6K nodes
>>
>> On Fri, Jun 6, 2008 at 9:13 PM, MARTINEZ Antonio
>> <[EMAIL PROTECTED]> wrote:
>>> I have an issue saving 6K inside a transaction on Jboss. I have about
>
>>> 6K Nodes in the tree with about 15 String properties each.
>>
>> How long are the Strings (average and maximum)? If you have long
>> strings, consider using the DataStore (since Jackrabbit 1.4, see here
>> http://wiki.apache.org/jackrabbit/DataStore).
>>
>> Are you using a bundle persistence manager? Which version of
>> Jackrabbit do you use?
>>
>> Regards,
>> Alex
>>
>> --
>> Alexander Klimetschek
>> [EMAIL PROTECTED]
>>
>
