The SMSC I am connected to apparently doesn't support 60-series
operations.
Is there any way i can make kannel use 50-series operations instead?

Jacob

-----Original Message-----
From: Jacob Vennervald Madsen 
Sent: 13. november 2001 09:25
To: Bruno David Simoes Rodrigues
Cc: [EMAIL PROTECTED]
Subject: RE: EMI2


It is alphanumeric.
Do you think it makes a difference?

Jacob

-----Original Message-----
From: Bruno David Simoes Rodrigues [mailto:[EMAIL PROTECTED]]
Sent: 12. november 2001 22:59
To: Jacob Vennervald Madsen
Cc: [EMAIL PROTECTED]
Subject: Re: EMI2


Is your username alphanumeric ?

The code of emi2 just encodes a numeric username, we have to
see if emi specs say something about encoding alphanumeric
usernames.

I'm always using num�ric usernames (usually the short code)

----- Original Message -----
From: "Jacob Vennervald Madsen" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, November 12, 2001 1:53 PM
Subject: EMI2


Hi List

I'm using Kannel 1.1.5 on a Linux machine.
I'm trying to connect to a CMG UCP interface.
This is my configuration:

group = smsc
smsc = emi2
host = smsc.maingate.se
port = 5001
smsc-username = **********
smsc-password = **********
receive-port = 9171
connect-allow-ip = 195.67.90.149

When i start Kannel I get the following error:

2001-11-12 13:43:24 [0] DEBUG: smsc_emi2: start called
2001-11-12 13:43:24 [7] DEBUG: sms_router: time to sleep
2001-11-12 13:43:24 [7] DEBUG: sms_router: list_len = 0
2001-11-12 13:43:24 [6] DEBUG: Sending operation type 60, message with
password not shown in log file.
2001-11-12 13:43:24 [6] DEBUG: emi2 parsing packet: <00/00035/R/60/N/02/
Syntax error/FA>
2001-11-12 13:43:24 [6] ERROR: Got negative ack. op:60, trn:0, error:2
(Syntax error), message: Syntax error
2001-11-12 13:43:24 [6] ERROR: smsc_emi2: Server rejected our login,
giving up
2001-11-12 13:43:24 [5] DEBUG: Thread 5 (gw/smsc_emi2.c:emi2_listener)
terminates.
2001-11-12 13:43:24 [6] DEBUG: smsc_emi2 connection has completed
shutdown.
2001-11-12 13:43:24 [6] DEBUG: Thread 6 (gw/smsc_emi2.c:emi2_sender)
terminates.

Any ideas?

Jacob






Reply via email to