Hi Odel, here are my log files. I took out the speed as you requested and this is what i get in my kannel.log....it seems like it searches for it and then it fails to connect. below is also my smsbox.log
kannel.log
2002-05-13 14:48:27 [0] INFO: ----------------------------------------
2002-05-13 14:48:27 [0] INFO: Kannel bearerbox II version 1.1.6 starting
2002-05-13 14:48:27 [0] INFO: Started access logfile `access.log'.
2002-05-13 14:48:27 [0] DEBUG: HTTP: Opening server at port 13000.
2002-05-13 14:48:27 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
2002-05-13 14:48:27 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)
2002-05-13 14:48:27 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)
2002-05-13 14:48:27 [0] DEBUG: starting smsbox connection module
2002-05-13 14:48:27 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)
2002-05-13 14:48:27 [0] INFO: AT2[at2]: configuration shows modemtype <nokiaphone>
2002-05-13 14:48:27 [0] DEBUG: AT2[at2]: Reading modem definitions from <kanneltry.conf>
2002-05-13 14:48:27 [0] DEBUG: Loading include file `/root/gateway-1.1.6/doc/modemstry.conf' (on line 48 of file kanneltry.conf).
2002-05-13 14:48:27 [0] DEBUG: AT2[at2]: Found <10> modems in config
2002-05-13 14:48:27 [0] INFO: AT2[at2]: read modem definition for <Nokia Phone>
2002-05-13 14:48:27 [0] DEBUG: Started thread 5 (gw/smsc_at2.c:at2_device_thread)
2002-05-13 14:48:27 [0] DEBUG: Started thread 6 (gw/bb_smscconn.c:sms_router)
2002-05-13 14:48:27 [0] INFO: MAIN: Start-up done, entering mainloop
2002-05-13 14:48:27 [5] INFO: AT2[at2]: trying to use speed <9600> from modem definition
2002-05-13 14:48:27 [5] INFO: AT2[at2]: opening device
2002-05-13 14:48:27 [5] DEBUG: AT2[at2]: device opened
2002-05-13 14:48:27 [5] INFO: AT2[at2]: speed set to 9600
2002-05-13 14:48:27 [5] DEBUG: AT2[at2]: --> ^M
2002-05-13 14:48:27 [0] DEBUG: AT2[at2]: start called
2002-05-13 14:48:27 [6] DEBUG: sms_router: time to sleep
2002-05-13 14:48:27 [6] DEBUG: sms_router: list_len = 0
2002-05-13 14:48:29 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:48:33 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:48:37 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:48:41 [5] INFO: AT2[at2]: closing device
2002-05-13 14:48:41 [5] INFO: AT2[at2]: speed in modem definition don't work, will autodetect
2002-05-13 14:48:41 [5] DEBUG: AT2[at2]: detecting modem speed.
2002-05-13 14:48:41 [5] INFO: AT2[at2]: opening device
2002-05-13 14:48:41 [5] DEBUG: AT2[at2]: device opened
2002-05-13 14:48:41 [5] INFO: AT2[at2]: speed set to 57600
2002-05-13 14:48:41 [5] DEBUG: AT2[at2]: --> ^M
2002-05-13 14:48:43 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:48:47 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:48:49 [4] DEBUG: Started thread 7 (gw/bb_boxc.c:function)
2002-05-13 14:48:49 [7] INFO: Client connected from <127.0.0.1>
2002-05-13 14:48:49 [7] DEBUG: Started thread 8 (gw/bb_boxc.c:boxc_sender)
2002-05-13 14:48:51 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:48:55 [5] INFO: AT2[at2]: closing device
2002-05-13 14:48:55 [5] INFO: AT2[at2]: opening device
2002-05-13 14:48:55 [5] DEBUG: AT2[at2]: device opened
2002-05-13 14:48:55 [5] INFO: AT2[at2]: speed set to 38400
2002-05-13 14:48:55 [5] DEBUG: AT2[at2]: --> ^M
2002-05-13 14:48:57 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:49:01 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:49:05 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:49:09 [5] INFO: AT2[at2]: closing device
2002-05-13 14:49:09 [5] INFO: AT2[at2]: opening device
2002-05-13 14:49:09 [5] DEBUG: AT2[at2]: device opened
2002-05-13 14:49:09 [5] INFO: AT2[at2]: speed set to 19200
2002-05-13 14:49:09 [5] DEBUG: AT2[at2]: --> ^M
2002-05-13 14:49:11 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:49:15 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:49:19 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:49:23 [5] INFO: AT2[at2]: closing device
2002-05-13 14:49:23 [5] INFO: AT2[at2]: opening device
2002-05-13 14:49:23 [5] DEBUG: AT2[at2]: device opened
2002-05-13 14:49:23 [5] INFO: AT2[at2]: speed set to 9600
2002-05-13 14:49:23 [5] DEBUG: AT2[at2]: --> ^M
2002-05-13 14:49:25 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:49:29 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:49:33 [5] DEBUG: AT2[at2]: --> AT^M
2002-05-13 14:49:37 [5] INFO: AT2[at2]: closing device
2002-05-13 14:49:37 [5] INFO: AT2[at2]: cannot detect speed
2002-05-13 14:49:37 [5] DEBUG: Thread 5 (gw/smsc_at2.c:at2_device_thread) terminates.
2002-05-13 15:52:19 [0] WARNING: SIGHUP received, catching and re-opening logs
2002-05-13 15:52:30 [0] WARNING: Killing signal received, shutting down...
2002-05-13 15:52:30 [0] DEBUG: Shutting down Kannel...
2002-05-13 15:52:30 [0] DEBUG: shutting down smsc
2002-05-13 15:52:30 [0] DEBUG: AT2[at2]: Shutting down SMSCConn, slow
2002-05-13 15:52:30 [0] DEBUG: shutting down udp
2002-05-13 15:52:30 [0] WARNING: New killing signal received, killing neverthless...
smsbox.log--this i totally dont understand
2002-05-13 14:48:49 [0] DEBUG: Kannel smsbox version 1.1.6 starting
2002-05-13 14:48:49 [0] DEBUG: Started thread 4 (gw/smsbox.c:obey_request_thread)
2002-05-13 14:48:49 [0] DEBUG: Started thread 5 (gw/smsbox.c:url_result_thread)
2002-05-13 14:48:49 [0] INFO: Connected to bearerbox at localhost port 13001.
2002-05-13 14:48:49 [0] DEBUG: Started thread 6 (gw/heartbeat.c:heartbeat_thread)
2002-05-13 15:52:19 [0] WARNING: SIGHUP received, catching and re-opening logs
DO you think it has anything to do with my dau9p cable? someone suggested i use dlr3p instead....
I wrote to someone and he told me to try it out directly by connecting to a url, im just thinking if at this stage it already doesnt work, it wont make sense doing all that because you will involve more programs and more machines.....
Bing
>From: "Oded Arbel" <[EMAIL PROTECTED]>
>To: "Bing Tan" <[EMAIL PROTECTED]>
>CC: <[EMAIL PROTECTED]>
>Subject: RE: I need precious help: Nokia 6110 as SMSC but I dont get any reply!
>Date: Mon, 13 May 2002 14:12:48 +0200
>
>Your log file is incomplete. perhaps you do not give it enough time -
>after starting Kannel, it can take upto a minute for the modem to be
>ready to send.
>
> >2002-05-13 10:32:16 [7] INFO: Client connected from <127.0.0.1>
> >2002-05-13 10:32:16 [7] DEBUG: Started thread 8
>(gw/bb_boxc.c:boxc_sender)
>
>What happens after that ? I cannot help you if you don't supply the
>logs. please take out the speed option from the smsc group - Kannel
>should use the setting from the modems.conf, and autodetect is failed -
>this is the behaviour that is needed for trouble shooting. you can put
>it back if you still think it's needed - after everything runs smoothly.
>
>--
>Oded Arbel
>m-Wise Inc.
>[EMAIL PROTECTED]
>(972)-67-340014
>(972)-9-9581711 (ext: 116)
>
>::..
>In the force if Yoda's so strong, construct a sentence with words in the
>proper order then why can't he?
>
>
>
>
>-----Original Message-----
>From: Bing Tan [mailto:[EMAIL PROTECTED]]
>Sent: Monday, May 13, 2002 1:09 PM
>To: Oded Arbel
>Cc: [EMAIL PROTECTED]
>Subject: RE: I need precious help: Nokia 6110 as SMSC but I dont get any
>reply!
>
>
>
>I tried to take out the speed, but the connection terminates because it
>failed to get anything I had to put it back. Now it seems there are no
>errorrs but still I dont get any messages sent back to me when i type in
>"default", or "nop". Can you send me a copy of your kannel.log/
>kannel.conf/ modems.conf, so i can at least compare it to mine? I dont
>know what a log file is suppose to look like when its running
>properly....
>
>I appreciate the help very very much
>
>My kannel.log now looks like this:
>2002-05-13 10:31:52 [0] INFO: Kannel bearerbox II version 1.1.6 starting
>
>2002-05-13 10:31:52 [0] INFO: Started access logfile `access.log'.
>
>2002-05-13 10:31:52 [0] DEBUG: HTTP: Opening server at port 13000.
>
>2002-05-13 10:31:52 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
>
>2002-05-13 10:31:52 [0] DEBUG: Started thread 2
>(gwlib/http.c:server_thread)
>
>2002-05-13 10:31:52 [0] DEBUG: Started thread 3
>(gw/bb_http.c:httpadmin_run)
>
>2002-05-13 10:31:52 [0] DEBUG: starting smsbox connection module
>
>2002-05-13 10:31:52 [0] DEBUG: Started thread 4
>(gw/bb_boxc.c:smsboxc_run)
>
>2002-05-13 10:31:52 [0] INFO: AT2[at2]: configuration shows modemtype
>
>
>2002-05-13 10:31:52 [0] DEBUG: AT2[at2]: Reading modem definitions from
>
>
>2002-05-13 10:31:52 [0] DEBUG: Loading include file
>`/root/gateway-1.1.6/doc/modemstry.conf' (on line 48 of file
>kanneltry.conf).
>
>2002-05-13 10:31:52 [0] DEBUG: AT2[at2]: Found <10> modems in config
>
>2002-05-13 10:31:52 [0] INFO: AT2[at2]: read modem definition for >Phone>
>
>2002-05-13 10:31:52 [0] DEBUG: Started thread 5
>(gw/smsc_at2.c:at2_device_thread)
>
>2002-05-13 10:31:52 [0] DEBUG: Started thread 6
>(gw/bb_smscconn.c:sms_router)
>
>2002-05-13 10:31:52 [0] INFO: MAIN: Start-up done, entering mainloop
>
>2002-05-13 10:31:52 [5] INFO: AT2[at2]: opening device
>
>2002-05-13 10:31:52 [5] DEBUG: AT2[at2]: device opened
>
>2002-05-13 10:31:52 [0] DEBUG: AT2[at2]: start called
>
>2002-05-13 10:31:52 [6] DEBUG: sms_router: time to sleep
>
>2002-05-13 10:31:52 [6] DEBUG: sms_router: list_len = 0
>
>2002-05-13 10:31:53 [5] DEBUG: AT2[at2]: device opened
>
>2002-05-13 10:31:53 [5] INFO: AT2[at2]: init device
>
>2002-05-13 10:31:53 [5] INFO: AT2[at2]: speed set to 9600
>
>2002-05-13 10:31:53 [5] DEBUG: AT2[at2]: --> AT^M
>
>2002-05-13 10:32:16 [4] DEBUG: Started thread 7 (gw/bb_boxc.c:function)
>
>2002-05-13 10:32:16 [7] INFO: Client connected from <127.0.0.1>
>
>2002-05-13 10:32:16 [7] DEBUG: Started thread 8
>(gw/bb_boxc.c:boxc_sender)
>
>
>my smsbox.log:
>
>2002-05-13 10:32:16 [0] DEBUG: Kannel smsbox version 1.1.6 starting
>
>2002-05-13 10:32:16 [0] DEBUG: Started thread 4
>(gw/smsbox.c:obey_request_thread)
>
>2002-05-13 10:32:16 [0] DEBUG: Started thread 5
>(gw/smsbox.c:url_result_thread)
>
>2002-05-13 10:32:16 [0] INFO: Connected to bearerbox at localhost port
>13001.
>
>2002-05-13 10:32:16 [0] DEBUG: Started thread 6
>(gw/heartbeat.c:heartbeat_thread)
>
>
>My kannel.conf:
>
> >group = smsc
>
> >smsc = at2
>
> >smsc-id=at2
>
> >modemtype = nokiaphone
>
> >device=/dev/ttyS0
>
> >speed=9600 /11
>
> >pin=XXXX
>
> >my-number=534xxxx (my cell number-is that correct?)
>
> >include= /root/gateway-1.1.6/doc/modemsbing.conf
>
> >
>
> >From: "Oded Arbel"
> >To: "Bing Tan" ,
> >Subject: RE: I need precious help: Nokia 6110 as SMSC but I dont get
>any reply!
> >Date: Mon, 13 May 2002 11:22:46 +0200
> >
> >Very weird. try this : don't define a speed setting in the smsc group,
> >and do define a my-number and smsc-id entry. now try it and send the
> >logs over, k ?
> >
> >--
> >Oded Arbel
> >m-Wise Inc.
> >[EMAIL PROTECTED]
> >(972)-67-340014
> >(972)-9-9581711 (ext: 116)
> >
> >::..
> >Computers are useless. They can only give you answers.
> > -- Pablo Picasso
> >
> >
> >
> >
> >-----Original Message-----
> >From: Bing Tan [mailto:[EMAIL PROTECTED]]
> >Sent: Monday, May 13, 2002 10:31 AM
> >To: [EMAIL PROTECTED]; Oded Arbel
> >Subject: RE: I need precious help: Nokia 6110 as SMSC but I dont get
>any
> >reply!
> >
> >
> >So as to give you guys alittle bit more background, my Kannel 1.1.6 is
> >loaded on a fresh onstallation of redhat 7.2, so there isn't anything
> >else on the box.
> >
> >It looks like the module quit while trying to access the modem, for no
> >apparent reason. also your log file looks corrupted :
> >2002-05-12 16:53:08 [5] DEBUG: AT2[/dev/tty! S0! ]: --> AT&F^M
> >It the name of the device shouldn't have exlamation marks in it.
> >another thing I noticed about your log is that bearerbox attempts
> >autodetect instead of using the nokiaphone entry. this could be cause
>by
> >a wrong configuration. please put an empty line between your smsc group
>
> >settings and the modems include directive, and also check your
> >modemsbing.conf to make sure that it contains the nokiaphone entry.
> > >This was one thing i was quite confused. I dont know why it goes to
> >autodetect but I am thinking even if it goes to autodetect, it does
> >eventually find something to connect to through the modemsbing.conf(
> >which by the way is at the bottom of this email) I tried separating the
>
> >include line as you suggested but no cigar. If ever, i also do hae a
> >nokia 7110 which i tried but still the same...no luck.
> >if none of this helps, please upgrade to the latest CVS, try again and
> >send us the los one more time.
> > >i am not familiar with using cvs at all...
> >--
> >Oded Arbel
> >m-Wise Inc.
> >[EMAIL PROTECTED]
> >(972)-67-340014
> >(972)-9-9581711 (ext: 116)
> >
> >::..
> >If man evolved from the ape, how come there are still apes around? Some
>
> >of them were given choices.
> > -- from Johnny Hart's comic strip "B.C."
> >
> >
> >
> >
> >-----Original Message-----
> >From: Bing Tan [mailto:[EMAIL PROTECTED]]
> >Sent: Monday, May 13, 2002 7:54 AM
> >To: [EMAIL PROTECTED]
> >Subject: I need precious help: Nokia 6110 as SMSC but I dont get any
> >reply!
> >
> >
> >
> >
> >
> >Bing Tan
> >
> >Can i ask you you guys for help? I am really new to Kannel so hope you
> >bear with me. I've searched through the archives and I'm pretty sure
> >this isnt a question that was posted....so its either Im really out of
> >my luck here or just plain stupid.
> >
> >I setup my machine properly. I use a 6110 phone on dau9p cable smsc. I
> >send an sms to this phone but i dont get any reply.I have no access.log
>
> >entry and my kannel.log says:
> >
> >2002-05-12 16:53:02 [0] INFO: Kannel bearerbox II version 1.1.6
>starting
> >2002-05-12 16:53:02 [0] INFO: Started access logfile `access.log'.
> >2002-05-12 16:53:02 [0] DEBUG: HTTP: Opening server at port 13000.
> >2002-05-12 16:53:02 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
> >2002-05-12 16:53:02 [0] DEBUG: Started thread 2
> >(gwlib/http.c:server_thread)
> >2002-05-12 16:53:02 [0] DEBUG: Started thread 3
> >(gw/bb_http.c:httpadmin_run)
> >2002-05-12 16:53:02 [0] DEBUG: starting smsbox connection module
> >2002-05-12 16:53:02 [0] DEBUG: Started thread 4
> >(gw/bb_boxc.c:smsboxc_run)
> >2002-05-12 16:53:02 [0] INFO: AT2[/dev/ttyS0]: configuration shows
> >modemtype
> >2002-05-12 16:53:02 [0] DEBUG: AT2[/dev/ttyS0]: Reading modem
> >definitions from
> >2002-05-12 16:53:02 [0] DEBUG: Loading include file
> >`/root/gateway-1.1.6/doc/modemsbing.conf' (on line 45 of file
> >smskannel.conf).
> >2002-05-12 16:53:02 [0] DEBUG: AT2[/dev/ttyS! ! ! 0]! : Found <10>
> >modems in config
> >2002-05-12 16:53:02 [0] INFO: AT2[/dev/ttyS0]: modemtype not found,
> >revert to autodetect
> >2002-05-12 16:53:02 [5] DEBUG: AT2[/dev/ttyS0]: detecting modem type
> >2002-05-12 16:53:02 [5] INFO: AT2[/dev/ttyS0]: opening device
> >2002-05-12 16:53:02 [5] DEBUG: AT2[/dev/ttyS0]: device opened
> >2002-05-12 16:53:02 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600
> >2002-05-12 16:53:02 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M
> >2002-05-12 16:53:02 [0] DEBUG: Started thread 5
> >(gw/smsc_at2.c:at2_device_thread)
> >2002-05-12 16:53:02 [0] DEBUG: Started thread 6
> >(gw/bb_smscconn.c:sms_router)
> >2002-05-12 16:53:02 [0] INFO: MAIN: Start-up done, entering mainloop
> >2002-05-12 16:53:02 [0] DEBUG: AT2[/dev/ttyS0]: start called
> >2002-05-12 16:53:02 [6] DEBUG: sms_router: time to sleep
> >2002-05-12 16:53:02 [6] DEBUG: sms_router: list_len = 0
> >2002-05-12 16:53:04 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
> >2002-05-12 16:53:08 [5] DEBUG: AT2[/dev! /t! ty! S0! ]: --> AT&F^M
> >2002-05-12 16:53:12 [5] DEBUG: Thread 5
> >(gw/smsc_at2.c:at2_device_thread) terminates.
> >2002-05-12 16:53:28 [4] DEBUG: Started thread 7 (gw/bb_boxc.c:function)
>
> >2002-05-12 16:53:28 [7] INFO: Client connected from <127.0.0.1>
> >2002-05-12 16:53:28 [7] DEBUG: Started thread 8
> >(gw/bb_boxc.c:boxc_sender)
> >2002-05-12 17:07:07 [0] WARNING: SIGHUP received, catching and
> >re-opening logs
> >2002-05-12 17:07:17 [0] WARNING: Killing signal received, shutting
> >down...
> >2002-05-12 17:07:17 [0] DEBUG: Shutting down Kannel...
> >2002-05-12 17:07:17 [0] DEBUG: shutting down smsc
> >2002-05-12 17:07:17 [0] DEBUG: AT2[/dev/ttyS0]: Shutting down SMSCConn,
>
> >slow
> >2002-05-12 17:07:17 [0] DEBUG: shutting down udp
> >2002-05-12 17:07:17 [0] WARNING: New killing signal received, killing
> >neverthless...
> >
> >Here's my smskannel.conf :
> >
> >group = core
> >admin-port = 13000
> >smsbox-port = 13001
> >admin-password = bar
> >log-file = "/tmp/kannel.log"
> >log-level = 2
> >box-deny-ip = "*.*.*.*"
> >box-allow-ip = "127.0.0.1"
> >unified-prefix = "+63917,0917,+0917"
> >access-log = "access.log"
> >
> >group = smsc
> >smsc = at2
> >modemtype = nokiaphone
> >device=/dev/ttyS0
> >speed=9600
> >pin=XXXX
> >include= /root/gateway-1.1.6/doc/modemsbing.conf
> >
> >group = smsbox
> >bearerbox-host = localhost
> >sendsms-port = 13013
> >global-sender = 534XXXX
> >sendsms-chars = "0123456789 "
> >log-file = "/tmp/smsbox.log"
> >log-level = 2
> >access-log = "access.log"
> >
> >group = sendsms-user
> >username = tester
> >password = foobar
> >
> >group = sendsms-user
> >username = kannel
> >password = rL4y
> >user-deny-ip = "*.*.*.*"
> >user-allow-ip = "127.0.0.1"
> >
> >group = sms-service
> >keyword = get
> >text = "shake your bon bon"
> >
> >group = sms-service
> >keyword = relay
> >get-url = " http://localhost:15130/sms?user=kannel
> >
> >&pass=rL4y&from=%p&to=%P&text=%r"
> >max-messages = 1
> >
> >group = sms-service
> >keyword = default
> >text = "No service specified"
> >
> >
> >and here is my modems.conf:
> >
> ># Modems configuration
> >#
> ># Example and default values
> >#
> ># group = modems
> ># id = "my-id"
> ># name = "my-name"
> ># detect-string = "MODEM"
> ># detect-string2 = "" [Default]
> ># init-string = "AT+CNMI=1,2,0,0,0" [Default]
> ># speed = 9600 [Default]
> ># enable-hwhs = "AT+IFC=2,2" [Default]
> ># need-sleep = false [Default]
> ># no-pin = false [Default]
> ># no-smsc = false [Default]
> ># sendline-sleep = 100 [Default, miliseconds]
> ># keepalive-cmd = "AT" [Default]
> ># broken = false [Default]
> ># message-storage = "SM"
> >
> >
> ># If modemtype=auto, try everyone and defaults to this one
> >group = modems
> >id = generic
> >name = "Generic Modem"
> >
> >group = modems
> >id = wavecom
> >name = Wavecom
> >detect-string = "WAVECOM"
> >
> >group = modems
> >id = premicell
> >name = Premicell
> >detect-string = "PREMICEL"
> >no-pin = true
> >no-smsc = true
> >
> >group = modems
> >id = siemens_tc35
> >name = "Siemens TC35"
> >detect-string = "SIEMENS"
> >detect-string2 = "TC35"
> >init-string = "AT+CNMI=1,2,0,0,1"
> >speed = 19200
> >enable-hwhs = "AT\\Q3"
> >need-sleep = true
> >
> >group = modems
> >id = siemens_m20
> >name = "Siemens M20"
> >detect-string = "SIEMENS"
> >detect-string2 = "M20"
> >speed = 19200
> >enable-hwhs = "AT\\Q3"
> >need-sleep = true
> >
> >group = modems
> >id = nokiaphone
> >name = "Nokia Phone"
> >detect-string = "Nokia Mobile Phone"
> >need-sleep = true
> >keepalive-cmd = "AT+CBC;+CSQ"
> >
> >group = modems
> >id = falcom
> >name = "Falcom"
> >detect-string = "Falcom"
> >no-smsc = true
> >
> >group = modems
> >id = ericsson_r520m
> >name = "Ericsson R520m"
> >detect-string = "R520m"
> >init-string = "AT+CNMI=3,2,0,0"
> >
> >group = modems
> >id = ericsson_t68
> >name = "Ericsson T68"
> >detect-string = "T68"
> >init-string = "AT+CNMI=3,3"
> >keepalive-cmd = "AT+CBC;+CSQ"
> >broken = true
> >
> >group = modems
> >id = alcatel
> >name = "Alcatel"
> >detect-string = "Alcatel"
> >init-string = "AT+CNMI=3,2,0,0"
> >
> >
> >Any help is extremely appreciated. Thanks in advance.
> >
> >
> >
> >Bing Tan
> >
> >
> > _____
> >
> >MSN Photos is the easiest way to share and print your photos: Click
> > Here
> >
> >
>
> _____
>
>MSN Photos is the easiest way to share and print your photos: Click
> Here
>
>
