hi dear kannel-users, after one day with a working sms-gateway with my siemens tc35 I don't get it to work any more! (and this with linux!!) I reinstalled the computer because of wrong diskparameters to make a "clean" installation...with the same packages.
ok, again some background information: -linux mandrake 8.1 with libxml 2.4.3 - kannel 1.1.6 dev (downloaded via cvs and tar.gz) - installed with "./configure", "make", "make install" using the following settings in kannel.conf: group = smsc smsc = at2 modemtype = siemens_tc35 device = /dev/ttyS0 pin = 14xx #my-number = 0162177xxx sms-center = +491722270xxx include = "/var/www/html/conf/modems.conf" note: when I use "modemtype = siemens-tc35" it doesn't find any definitions within modems.conf, I think because there it is written "siemens_tc35" within modems.conf. although I get always the same errors (see below.) the LED of the modem is fast flashing (SIM card is inserted, power on, seems that only the pinnumber from the kannel.conf is needed.) and the modem is known to the linux system. ##### using modemtype = siemens-tc35 ########### 2002-05-14 08:45:52 [0] INFO: AT2[/dev/ttyS0]: configuration shows modemtype <siemens-tc35> 2002-05-14 08:45:52 [0] INFO: AT2[/dev/ttyS0]: modemtype not found, revert to autodetect ##### using modemtype = siemens_tc35 ########### [root@sputnik root]# /usr/local/sbin/bearerbox -v 1 /var/www/html/conf/kannel.co nf 2002-05-14 08:19:31 [0] INFO: Debug_lvl = 1, log_file = <none>, log_lvl = 0 2002-05-14 08:19:31 [0] WARNING: DLR: using default 'internal' for storage type. 2002-05-14 08:19:31 [0] INFO: ---------------------------------------- 2002-05-14 08:19:31 [0] INFO: Kannel bearerbox II version cvs- starting 2002-05-14 08:19:31 [0] INFO: SSL not supported, no SSL initialization done. 2002-05-14 08:19:31 [0] INFO: AT2[/dev/ttyS0]: configuration shows modemtype <si emens_tc35> 2002-05-14 08:19:31 [0] INFO: AT2[/dev/ttyS0]: read modem definition for <Siemen s TC35> 2002-05-14 08:19:31 [5] INFO: AT2[/dev/ttyS0]: trying to use speed <19200> from modem definition 2002-05-14 08:19:31 [5] INFO: AT2[/dev/ttyS0]: opening device 2002-05-14 08:19:31 [5] INFO: AT2[/dev/ttyS0]: speed set to 19200 2002-05-14 08:19:31 [0] ERROR: Missing wapbox-port variable, cannot start WAP 2002-05-14 08:19:31 [0] INFO: MAIN: Start-up done, entering mainloop 2002-05-14 08:19:45 [5] INFO: AT2[/dev/ttyS0]: closing device 2002-05-14 08:19:45 [5] INFO: AT2[/dev/ttyS0]: speed in modem definition don't work, will autodetect 2002-05-14 08:19:45 [5] INFO: AT2[/dev/ttyS0]: opening device 2002-05-14 08:19:45 [5] INFO: AT2[/dev/ttyS0]: speed set to 57600 2002-05-14 08:19:59 [5] INFO: AT2[/dev/ttyS0]: closing device 2002-05-14 08:19:59 [5] INFO: AT2[/dev/ttyS0]: opening device 2002-05-14 08:19:59 [5] INFO: AT2[/dev/ttyS0]: speed set to 38400 2002-05-14 08:20:13 [5] INFO: AT2[/dev/ttyS0]: closing device 2002-05-14 08:20:13 [5] INFO: AT2[/dev/ttyS0]: opening device 2002-05-14 08:20:13 [5] INFO: AT2[/dev/ttyS0]: speed set to 19200 2002-05-14 08:20:27 [5] INFO: AT2[/dev/ttyS0]: closing device 2002-05-14 08:20:27 [5] INFO: AT2[/dev/ttyS0]: opening device 2002-05-14 08:20:27 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600 2002-05-14 08:20:41 [5] INFO: AT2[/dev/ttyS0]: closing device 2002-05-14 08:20:41 [5] INFO: AT2[/dev/ttyS0]: cannot detect speed it is always the same game. ;(( . what can be the reason? remember, one day it worked. - is the modem so buggy? or does it depend on the dev-status of kannel? - did I do a fault in compiling?? - if it depends on the modem - which other modems are known to work already and without many problems? this is quite important, because we might set up more than one computer with kannel and want to buy another modem!! (there's another topic with this question, I will wait for the answers....) Once again - any hints?? greetz lars-hendrik A box of german pilsener.... ;) ************************* Lars-Hendrik Schneider [EMAIL PROTECTED] sysAdmin AG Dikau
