Setting the keepalive did not help... I have now tried the setup with ericsson t39 and that is working perfectly. If I receive many messages, will the phone get full??
/Peter Lofman > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of Bruno > David Rodrigues > Sent: den 17 juni 2002 14:28 > To: Andrea Trasatti > Cc: [EMAIL PROTECTED] > Subject: RE: Siemens M20 stops receiving sms > > > On Mon, 2002-06-17 at 09:19, Andrea Trasatti wrote: > > Hello, > > are you sure it's a problem with Kannel and not with the M20? > > > > How often do you get SMS messages on it? We have *2* M20 here and we > > experienced a similar problem VERY often. It seems like if > the phone doesn't receive > > SMS messages for a while and the server resets it, the > phone will just go in some > > limbo state. It looks like it's alive, but whatever you try > to do, it fails. It doesn't receive > > messages anymore and if you try to send any, it will give > you a network error, as if > > the cell had rejected the message or something. Turn the > phone off and back on and > > it'll restart working. > > I did have that problem too. M20 stopped receiving messages. > I don't send anything through it. > > Try to add keepalive: > keepalive = 60 > keepalive-cmd = "AT+CBC;+CSQ" > > Then watch the values > > --> AT+CBC;+CSQ^M > <-- +CBC: 1,100 > <-- +CSQ: 16,0 > > CBC= on power, 100 batery > CSQ= signal 16 (see 3gpp-27007 or 27005) >
