> My goal is to retrieve and to properly display the WML pages > on the microbrowser screens. Right now my high-level problem > appears to be a lack of communication between bearerbox and > wapbox for the initial HTTP request from the microbrowsers. I > suspect the solution to the problem lies between the > bearerbox log file and the kannel.conf file. In addition, > when I configure the browsers, the request port is set to > 13000 (see line 4 of the bearerbox log file). When I > reconfigure the browser to use port number 9200 or 9201 as > shown in lines 9 and 12 of the bearerbox log file, the error > message changes to "connection refused."
I'm not 100% clear on exactly what it is you are trying to do here. Port 13000 is the admin port which is used to perform specific tasks with Kannel remotely. It will not respond to content requests. Ports 9200 and 9201 are WAP ports, but you need to submit WAP requests and *not* HTTP requests to them. An HTTP request over IP to these ports will not work. What you need to do is submit a WAP request to Kannel via ports 9200/9201. What would be useful is if you grab yourself a copy of Ethereal (www.ethereal.com) and use that instead of tcpdump. Ethereal has support for decoding of both the HTTP and WAP protocols (among many others) and will show in more detail exactly what is being sent where. Cheers, Neil ------------------------------------------------------------------------ ------- Neil Hunter Tel: +44 (0)113 207 6073 Senior Developer Fax: +44 (0)113 207 6017 Energis Squared Mobile: +44 (0)7787 100 649 http://www.energis-squared.com/ --------------------------------------- This email is confidential and may be privileged. If you are not the named recipient please notify the sender immediately and do not disclose to another person or use it and take copies. If you receive this message in error please call the switchboard on + 44 (0)113 234 5100. ------------------------------------------------------------------------ -------
