Settings are the following :
inittab :
S0:2345:respawn:/sbin/mgetty ttyS0 -x 6 -D /dev/ttyS0
/etc/mgetty+sendfax/login.config :
/AutoPPP/ - - /usr/sbin/pppd file /etc/ppp/options.server
/etc/mgetty+sendfax/mgetty.config
speed 38400
/etc/ppp/options.server
refuse-chap
require-pap
lock
modem
crtscts
passive
10.66.14.86:192.168.1.20
debug
/etc/ppp/pap-secrets
wapuser * wappswd 192.168.0.20
for the cell phone I have tried a 7110 with the following params
connection type continuous
connection security off
bearer data
dial up number (your phone number)
ip address (IP of host running bearerbox)
auth type normal
data call type analogue
data call speed 9600
username wapuser
password wappswd
Ilari Mikkonen
<ile.mikkonen@iob To: [EMAIL PROTECTED]
ox.com> cc:
Sent by: Subject: RE:using kannel with a n
analog modem
users-admin@kanne
l.3glab.org
07/18/2002 01:15
PM
Would be nice to see your Nokia 6210 settings and what options you have for
ppp. You could check the logs that ppp creates..
ilari mikkonen
> Hi all
>
> I'm using kannel 1.2.0 as a wap gateway to test some code with cell
phones
> calling an analog modem. I have configure mgetty and ppp exactly as told
in
> the userguide. It seems the cell phone doesn't send correct signal to the
> modem, here is what I have in my mgetty log file :
>
> 07/17 17:09:17 yS0 mgetty: experimental test release 1.1.28-Jan10
> 07/17 17:09:17 yS0 mgetty.c compiled at Mar 28 2002, 19:25:08
> 07/17 17:09:17 yS0 user id: 0, parent pid: 1
> 07/17 17:09:17 yS0 reading configuration data for port 'ttyS0'
> 07/17 17:09:17 yS0 reading /etc/mgetty+sendfax/mgetty.config...
> 07/17 17:09:17 yS0 conf lib: read: 'debug 9'
> 07/17 17:09:17 yS0 conf lib: read: 'speed 38400'
> 07/17 17:09:17 yS0 conf lib: read: 'port ttyS0'
> 07/17 17:09:17 yS0 section: port ttyS0, **found**
> 07/17 17:09:17 yS0 conf lib: read: 'debug 9'
> 07/17 17:09:17 yS0 key: 'speed', type=0, flags=3, data=38400
> 07/17 17:09:17 yS0 key: 'switchbd', type=0, flags=1, data=0
> 07/17 17:09:17 yS0 key: 'direct', type=3, flags=1, data=FALSE
> 07/17 17:09:17 yS0 key: 'blocking', type=3, flags=1, data=FALSE
> 07/17 17:09:17 yS0 key: 'port-owner', type=1, flags=1, data=uucp
> 07/17 17:09:17 yS0 key: 'port-group', type=1, flags=1, data=uucp
> 07/17 17:09:17 yS0 key: 'port-mode', type=0, flags=1, data=432
> 07/17 17:09:17 yS0 key: 'toggle-dtr', type=3, flags=1, data=TRUE
> 07/17 17:09:17 yS0 key: 'toggle-dtr-waittime', type=0, flags=1,
data=500
> 07/17 17:09:17 yS0 key: 'need-dsr', type=3, flags=1, data=FALSE
> 07/17 17:09:17 yS0 key: 'data-only', type=3, flags=2, data=TRUE
> 07/17 17:09:17 yS0 key: 'fax-only', type=3, flags=1, data=FALSE
> 07/17 17:09:17 yS0 key: 'modem-type', type=1, flags=1, data=auto
> 07/17 17:09:17 yS0 key: 'modem-quirks', type=0, flags=0, data=(empty)
> 07/17 17:09:17 yS0 key: 'init-chat', type=2, flags=1, data= \dATQ0V1H0
OK
> ATS0=0Q0&D3&C1 OK
> 07/17 17:09:17 yS0 key: 'force-init-chat', type=2, flags=1, data= \d
> \d\d\d+++\d\d\d
> \dATQ0V1H0 OK
> 07/17 17:09:17 yS0 key: 'post-init-chat', type=2, flags=0, data=(empty)
> 07/17 17:09:17 yS0 key: 'data-flow', type=4, flags=1, data=1
> 07/17 17:09:17 yS0 key: 'fax-send-flow', type=4, flags=1, data=7
> 07/17 17:09:17 yS0 key: 'fax-rec-flow', type=4, flags=1, data=7
> 07/17 17:09:17 yS0 key: 'modem-check-time', type=0, flags=1, data=3600
> 07/17 17:09:17 yS0 key: 'rings', type=0, flags=1, data=1
> 07/17 17:09:17 yS0 key: 'msn-list', type=2, flags=0, data=(empty)
> 07/17 17:09:17 yS0 key: 'get-cnd-chat', type=2, flags=0, data=(empty)
> 07/17 17:09:17 yS0 key: 'cnd-program', type=1, flags=0, data=(empty)
> 07/17 17:09:17 yS0 key: 'answer-chat', type=2, flags=1, data= ATA
CONNECT
> \c
>
> 07/17 17:09:17 yS0 key: 'answer-chat-timeout', type=0, flags=1, data=80
> 07/17 17:09:17 yS0 key: 'autobauding', type=3, flags=1, data=FALSE
> 07/17 17:09:17 yS0 key: 'ringback', type=3, flags=1, data=FALSE
> 07/17 17:09:17 yS0 key: 'ringback-time', type=0, flags=1, data=30
> 07/17 17:09:17 yS0 key: 'ignore-carrier', type=3, flags=1, data=FALSE
> 07/17 17:09:17 yS0 key: 'issue-file', type=1, flags=1, data=/etc/issue
> 07/17 17:09:17 yS0 key: 'prompt-waittime', type=0, flags=1, data=500
> 07/17 17:09:17 yS0 key: 'login-prompt', type=1, flags=1, data=@ login:
> 07/17 17:09:17 yS0 key: 'login-time', type=0, flags=1, data=240
> 07/17 17:09:17 yS0 key: 'fido-send-emsi', type=3, flags=1, data=TRUE
> 07/17 17:09:17 yS0 key: 'login-conf-file', type=1, flags=1,
> data=login.config
> 07/17 17:09:17 yS0 key: 'fax-id', type=1, flags=1, data=49 115 xxxxxxxx
> 07/17 17:09:17 yS0 key: 'fax-min-speed', type=0, flags=1, data=0
> 07/17 17:09:17 yS0 key: 'fax-max-speed', type=0, flags=1, data=14400
> 07/17 17:09:17 yS0 key: 'fax-server-file', type=1, flags=0, data
=(empty)
> 07/17 17:09:17 yS0 key: 'diskspace', type=0, flags=1, data=1024
> 07/17 17:09:17 yS0 key: 'notify', type=1, flags=1, data=faxadmin
> 07/17 17:09:17 yS0 key: 'fax-owner', type=1, flags=1, data=uucp
> 07/17 17:09:17 yS0 key: 'fax-group', type=1, flags=0, data=(empty)
> 07/17 17:09:17 yS0 key: 'fax-mode', type=0, flags=1, data=432
> 07/17 17:09:17 yS0 key: 'fax-spool-in', type=1, flags=1,
> data=/var/spool/fax/incoming:/tmp
> 07/17 17:09:17 yS0 key: 'debug', type=0, flags=2, data=9
> 07/17 17:09:17 yS0 key: 'statistics-chat', type=2, flags=0, data
=(empty)
> 07/17 17:09:17 yS0 key: 'statistics-file', type=1, flags=0, data
=(empty)
> 07/17 17:09:17 yS0 key: 'gettydefs', type=1, flags=1, data=n
> 07/17 17:09:17 yS0 key: 'term', type=1, flags=0, data=(empty)
> 07/17 17:09:17 yS0 check for lockfiles
> 07/17 17:09:17 yS0 checklock: stat failed, no file
> 07/17 17:09:17 yS0 locking the line
> 07/17 17:09:17 yS0 makelock(ttyS0) called
> 07/17 17:09:17 yS0 do_makelock: lock='/var/lock/LCK..ttyS0'
> 07/17 17:09:17 yS0 lock made
> 07/17 17:09:17 yS0 tio_get_rs232_lines: status: RTS CTS DSR DTR
> 07/17 17:09:17 yS0 lowering DTR to reset Modem
> 07/17 17:09:18 yS0 tss: set speed to 38400 (017)
> 07/17 17:09:18 yS0 tio_set_flow_control( HARD )
> 07/17 17:09:18 yS0 waiting for line to clear (VTIME), read:
> 07/17 17:09:18 yS0 send: \dATQ0V1H0[0d]
> 07/17 17:09:18 yS0 waiting for ``OK''
> 07/17 17:09:18 yS0 got: [0d][0a]OK ** found **
> 07/17 17:09:19 yS0 send: ATS0=0Q0&D3&C1[0d]
> 07/17 17:09:19 yS0 waiting for ``OK''
> 07/17 17:09:19 yS0 got: [0d]
> 07/17 17:09:19 yS0 CND: OK[0a][0d][0a]OK ** found **
> 07/17 17:09:19 yS0 waiting for line to clear (VTIME), read: [0d][0a]
> 07/17 17:09:19 yS0 removing lock file
> 07/17 17:09:19 yS0 waiting...
> 07/17 17:14:27 yS0 select returned 1
> 07/17 17:14:27 yS0 checking lockfiles, locking the line
> 07/17 17:14:27 yS0 makelock(ttyS0) called
> 07/17 17:14:27 yS0 do_makelock: lock='/var/lock/LCK..ttyS0'
> 07/17 17:14:27 yS0 lock made
> 07/17 17:14:27 yS0 wfr: waiting for ``RING''
> 07/17 17:14:27 yS0 got: [0d][0a]RING[0d]
> 07/17 17:14:27 yS0 CND: RING
> 07/17 17:14:27 yS0 wfr: rc=0, drn=0
> 07/17 17:14:27 yS0 CND: check no: 'none'
> 07/17 17:14:27 yS0 send: ATA[0d]
> 07/17 17:14:27 yS0 waiting for ``CONNECT''
> 07/17 17:14:27 yS0 got: [0d]
> 07/17 17:14:34 yS0 CND: OK[0a]CONNECT ** found **
> 07/17 17:14:34 yS0 send:
> 07/17 17:14:34 yS0 waiting for ``_''
> 07/17 17:14:34 yS0 got: 9600/ARQ/V32/LAPM[0d]
> 07/17 17:14:34 yS0 CND: CONNECT 9600/ARQ/V32/LAPM
> 07/17 17:14:34 yS0 CND: found: 9600/ARQ/V32/LAPM[0a] ** found **
> 07/17 17:14:34 yS0 waiting for line to clear (VTIME), read:
> 07/17 17:14:34 yS0 looking for utmp entry... (my PID: 3113)
> 07/17 17:14:34 yS0 utmp + wtmp entry made
> 07/17 17:14:35 yS0 tio_set_flow_control( HARD )
> 07/17 17:14:35 yS0 print welcome banner (/etc/issue)
> 07/17 17:14:35 yS0 getlogname (AUTO_PPP),
>
read:[80]xxx[00][80][00]x[80]xx[00][80]xx[00][80]xx[80]xxxxx[80][80]xx[00][80]xxxxx[00][80]xx[00][80]xx[80][80]xx[80]xx[80]xx[80]xx[80][00]xx[f8][80][f8][80]xxx[00][80][00]x[80]xx[00][80]xx[00][80]xx[80]xxxxx[80][80]xx[00][80]xxxxx[00][80]xx[00][80]xx[80][80]xx[80]xx[80]xx[80]xx[80][f8][f8]x[f8][f8][80][f8][80]xxx[00][80][00]x[80]xx[00][80]xx[00][80]xx[80]xxxxx[80][80]xx[00][80]xxxxx[00][80]xx[00][80]xx[80][80]xx[80]xx[80]xx[80]xx[80][80][f8][80][f8][f8][80][f8][80]xxx[00][80][00]x[80]xx[00][80]xx[80][80]xx[80]xxxxx[80][80]xx[00][80]xxxxx[00][80]xx[00][80]xx[80][80]xx[80]xx[80]xx[80]xx[80]x[f8][f8][80][00][f8][80][f8][80]xxx[00][80][00]x[80]xx[00][80]xxx[80]xx[80]xxxxx[80][80]xx[00][80]xxxxx[00][80]xx[00][80]xx[80][80]xx[80]xx[80]xx[80]xx[80]xx[80][f8][80][f8][80][f8][80]xxx[00][80][00]x[80]xx[00][80]xx[80][80]xx[80]xxxxx[80][80]xx[00][80]xxxxx[00][80]xx[00][80]xx[80][80]xx[80]xx[80]xx[80]xx[80][f8][f8]xx[80][f8][80]xxx[00][80][00]x[80]xx[00][80]xx[80][80]xx[80]xxxx
>
x[80][80]xx[00][80]xxxxx[00][80]xx[00][80]xx[80][80]xx[80]xx[80]xx[80]xx[80][80][00]xx[80][f8][80]xxx[00][80][00]x[80]xx[00][80]xxxxx[80]xxxxx[80][80]xx[00][80]xxxxx[00][80]xx[00][80]xx[80][80]xx[80]xx[80]xx[80]xx[80]x[f8]x[80][80][80][f8][80]xxx[00][80][00]x[80]xx[00][80]xx[80]xxx[80]xxxxx[80][80]xx[00][80]xxxxx[00][80]xx[00][80]xx[80][80]xx[80]xx[80]xx[80]xx[80][00][00][00][80][80][f8][80]xxx[00][80][00]x[80]xx[00][80]xxx[80]xx[80]xxxxx[80][80]xx[00][80]xxxxx[00][80]xx[00][80]xx[80][80]xx[80]xx[80]xx[80]xx[80][f8][80][80][80][80][80][80][f8]
> 07/17 17:15:05 ##### failed dev=ttyS0, pid=3113, got signal 1, exiting
>
> 07/17 17:15:05 yS0 removing lock file
>
> I have test with a sagem 3046 and a nokia 6210
>
> Can someone tell me what's wrong ?
>
> Laurent
>
>
>
>
>
>
