Unfortunately no. The port is the same as the receive port. According to our SMSC, we need to log-in on the same IP and Port number but with different password.
The reason for this is that the receive connection will be purely for receive only and the send connection will be for send purposes only. Thanks, Andy Arnar Gestsson wrote: > Hi, > > does your send connection have another port than this one? If so you > need to define another item of group = smsc, with all the relevant > parameters. > > BR > Arnar > > Arnar Gestsson > TrackWell Software > > On M�n, 2002-07-22 at 10:03, Andy Elacion, Jr. wrote: > > Our SMSC said that we are only using a receive connection and he was > > asking us to connect also using the send connection. > > > > My question is this. Where should I put the send username and > > password. We use the following config: > > > > # SMSC CONNECTIONS > > group = smsc > > smsc-id = SMS > > smsc = cimd2 > > host = 192.168.0.245 > > port = 9971 > > smsc-username = username > > smsc-password = password > > keepalive = 1 > > > > > > > > Andy Elacion, Jr. > > Network Supervisor > > imGAME.com.ph > > ---------------------------------------------------------------------- > > The information contained in this Internet message is confidential and > > intended only for the use of the individual or entity identified. If the > > reader of this message is not the intended recipient, any dissemination, > > distribution or copying of the information contained in this Internet > > message is strictly prohibited. If you received this message in error, > > please notify the sender immediately. > > > > > >
