Check that your modem is accessible with minicom (or any terminal program) and then
try to run bearerbox again. if that works, then you have the problem with the opening
of the modem device - check the STATUS file for a simple workaround
--
Oded Arbel
m-Wise mobile solutions
[EMAIL PROTECTED]
+972-9-9581711 (116)
+972-67-340014
::..
"Truth never comes into the world but like a bastard, to the ignominy
of him that brought her birth."
-- Milton
> -----Original Message-----
> From: Avner Sternheim [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, September 04, 2002 6:30 PM
> To: '[EMAIL PROTECTED]'
> Subject: GSM Modem M20
>
>
> I've install Kannel stable version 1.2 and set the modem
> configuration for
> my siemens m20 modem,
> when I start to run the bearerbox I get error message:
>
> no answer from modem, how can i set the modem up
> my config file look like this:
>
> group = smsc
> smsc = at2
> modemtype = siemens
> device = /dev/ttyS1
> speed = 9600
>
> group = modems
> id = siemens
>
> regards,
> Avner
>
>
>
